Applications
(855-165196 / Rev.A / May 2005)
Specifications
PI Systems: PI32, PI44 or PI54
Update rates:
• Fast: Every 4,5 second (approx.)
• Normal: Every 14 second (approx.)
• Slow: Every 34 second (approx.)
Default update rate: Fast
Lifetime between each recharge:
• Fast update rate: 24 hours
• Normal update rate: 75 hours
• Slow update rate: 150 hours
Communication frequency range: 43,5 to 49,5 kHz
Accuracy: 0,2 %
Physical properties:
• Length: 246 mm
• Width: 171 mm
• Thickness: 123 mm
• Weight in water: 1,4 kg
• Weight in air: 4,3 kg
Charging time with PI Charger:
• To 70% capacity: 1 hour
• To 100% capacity: 4 hours
Charging time with PS Charger:
• To 100% capacity: 16 hours
Specifications can be altered without prior notification.
Simrad Horten AS
Strandpromenaden 50
P.O.Box 111
NO-3191 Horten
Norway
Telephone: +47 33 03 40 00
Facsimile: +47 33 04 29 87
MAXIMIZING YOUR PERFORMANCE AT SEA
www.simrad.com
The PI Temperature sensor tells you the
exact sea water temperature while you are
fishing.
The water temperature is an important parameter.
Fish and bait are temperature sensitive, and they are
normally found within specific temperature zones for
feeding and spawning.
However, the temperature layers in the water
are changing constantly, and for this reason the
temperature must be monitored constantly. Fishing in
an area with unfavourable water temperature might
be just a waste of time!
For any kind of trawling, use this sensor to
monitoring and log the temperature. Then, increase
your knowledge about the correlation between
temperature, fish concentration and catch efficiency.
On a purse seine net, monitor the temperature to see
when you are passing the thermo-cline.
