Sinbo SS 4050 User manual

SS 4050 MANICURE&PEDICURE SET
INSTRUCTION MANUAL
EN
RU

- 1 -
ENGLISH
SINBO SS 4050
MANICURE&PEDICURE SET
INSTRUCTION MANUAL
Dear Customer!
Thanks you for your choice.
You become the owner of the brand products Sinbo, which differ progressive design and
high quality.
We hope that our products will be your companion for many years.
Read the instructions carefully before use and keep it to refer to later!
PRECAUTIONS
1. Before connecting, check if the current parameters specified on the charger and the
instructions is the electrical parameters.
2. Always disconnect the device from the mains after charging.
3. Do not place the unit and its parts near or over hot surfaces, such as gas and electric,
heated oven.
4. Make sure that the power cord does not hang over the edge of the table, and do not
touch hot surfaces.
5. When you disconnect from the mains, do not pull on the cord because this may damage
the cord and cause a short circuit.
6. Do not immerse the device and its components in water or other liquids.
7. Do not use the appliance for any purposes other than those specified in this manual.
8. The device is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience or knowledge, unless they are
controlled or instructed on the use of the appliance by a person responsible for their
safety.
9. In the event of any malfunction of the device or its parts, do not use the appliance,
contact the authorized service center.
COMPONENTS
1-2-3-4. Tips for pedicure
5. Polishing wheels
6. Large cone attachment
7-8. Tips for treatment of nails
9. Stick to remove the cuticle
10. Attachment to raise the cuticle.
11. Cleaning brush
12. Button on the mini-dryer

- 2 -
FEATURES
Ergonomic design
2 speeds
30 minutes continuous working time
Rechargeable and direct-drive by adaptor
10 attachments, plate for cuticle
With mini-dryer function
AC230V, 50Hz, 2.5W
CHARGING
1. To charge the device connects it to the charger and plug the charger into a wall outlet.
2. In body the charge indicator lights.
3. After charging, disconnect the charger from the mains.
WORKING WITH THE INSTRUMENT
1. The device is intended for the care of finger nails and toenails.
2. Insert the desired attachment into the device and start carefully perform the operation,
which is designed for nozzle.
3. Before changing attachment, make sure that the axis on which the attachment is
installed, motionless.
4. When finished, disconnect the attachment and remove the device in case.
DESIGNATION OF ATTACHMENTS
1. Rough wheels: These are designed to remove the rough skin from foot.
The more rough skin, the more gritty drive to use.
2. Polishing disc: This attachment is designed for fine polishing nails in the final stages
of processing.
3. Large cone attachment: This attachment is designed for processing of thick nails.
4. Small cylindrical attachment: This attachment is designed for fine processing fingertips.
5. Small cone attachment: This attachment is used for the skin around the nails.
6. Brush: This attachment is designed to clean the nail after the treatment.
7. Attachment to raise the cuticle: Gently raises the cuticle for its further removal.
8. Stick to remove the cuticle: Used to manually raise the cuticle.
STORAGE AND MAINTENANCE
1. Unplug the charger from the mains.
2. Pollution appearing on the device or on the charger can be removed with a damp cloth,
then wipe with a dry cloth.
3. Do not use any chemical agents to clean the unit.
4. Keep the device is recommended in a cool dry place.

- 3 -
DISPOSAL
When disposing of unserviceable appliance take all measures to prevent damage to the
environment. In particular, it is not recommended to burn the packing and of the unit,
as the dyes used in the manufacture and packaging of the device, the burning emits
harmful substances that can harm the environment and human and animal health.
In particular, it is not recommended to burn the packing and of the unit, as the dyes used
in the manufacture and packaging of the device, the burning emits harmful substances
that can harm the environment and human and animal health.

- 7 -

- 8 -
01-2019