Sinoboom 1323RD User manual

1323RD/4389RD
1623RD/5389RD
Operation
Manual
Part No.502013100002
Rev: B
Mar. 2022
GTJZ
0608E (2132E)
GTJZ
0808E (2732E)
GTJZ
0808E (2732E)
GTJZ
0808E (2732E)
长沙市宁乡高新技术产业园区金洲大道东
128 号
0731-87116111 hr@sinoboom . c om . cn ww w .sinoboom . c om . cn
Al w ays F or B e t t er A cc ess Solution s
我们一直在追求新的高 度
尺寸 ：
210×285mm
20mm
20mm
产品说明书
PRODU C T MAN U AL

Operating, servicing and maintaining this vehicle or
equipment can expose you to chemicals including engine
exhaust, carbon monoxide, phthalates, and lead, which
are known to the State of California to cause cancer and
birth defects or other reproductive harm. To minimize
exposure, avoid breathing exhaust, do not idle the engine
except as necessary, service your vehicle or equipment in
a well-ventilated area and wear gloves or wash your
hands frequently when servicing. For more information
go to: www.P65warnings.ca.gov.
For disposal, please follow your nation regulation.

Please contact us:
Website : www.sinoboom.com
E-mail : [email protected]
Sales Tel : [phone]
Service Tel : [phone]
Address : No.128, East Jinzhou Avenue, Ningxiang High-tech Industrial Park, Changsha,
Hunan, China
Zip Code : 410600
Copyright © Hunan Sinoboom Intelligent Equipment Co., Ltd. All Rights Reserved
The final interpretation right of this manual belongs to Hunan Sinoboom Intelligent Equipment Co., Ltd.
Manual revision history:
REV DATE DESCRIPTION REMARK
AJul, 2021 Original issue of the manual
B Mar, 2022 Updated manual, added Yanmar engine information
etc.

APPLICATION
Use the following table to identify the specific serial number for models included in this manual. Check
the model of your machine before consulting the manual, and then use the correct manual according to
the serial number of the model. See the nameplate on your machine to identify the model and serial
number. (See Decals/Nameplate Inspection of the Operation Manual for details.)
Models
Trade Identification
Serial Numbers
Metric Imperial
1323RD 1323RD 4389RD 0201200100 to present
1623RD 1623RD 5389RD 0201300109 to present
NOTE:
•Product model is applied in product nameplate for distinction of products of different main
parameters.
•Product trade identification is applied in marketing and machine decals for distinction of products of
different main parameters, and can be classified as metric type and imperial type: The metric trade
identification is applicable to machines for countries/regions using metric system or as specially
required by customers; The imperial trade identification is applicable to the machines for countries/
regions using imperial system or as specially required by customers.

This Page Intentionally Left Blank

STATEMENTS
Hunan Sinoboom Intelligent Equipment Co., Ltd. (Hereinafter referred to as Sinoboom) will upload the
latest product manual information to the website www. sinoboom. com as soon as possible. However,
due to continuous product improvement, the information in this manual is subject to change without prior
notice.
This manual covers the basic parts information of one or more products. Therefore, please use this
manual according to your needs. If you find problems in the manual or have suggestions for improve-
ment, feel free to share your feedback with Sinoboom, and we will address these issues as soon as
possible.
Feel free to consult and download the Operation Manual,Maintenance Manual and Parts Manual of the
products you need online at www.sinoboom.com.
Hunan Sinoboom Intelligent Equipment Co., Ltd. retains the right of final interpretation of the manual.
All of the above are registered trademarks of Hunan Si-
noboom Intelligent Equipment Co., Ltd..

This Page Intentionally Left Blank

1323RD&1623RD Operation Manual i© Mar. 2022
TABLE OF CONTENTS
Introduction ............................. iii
1 Machine Specifications ........ 1-1
2 Machine Components .......... 2-1
3 Safety............................... 3-1
Safety Definitions . . . . . . . . .. . . . . . . . . . . . 3-1
Reporting Accidents. . . . . . . . . . . . . . . . . . . 3-1
Electrocution Hazards. . . . . . . . . . . . . . . . . 3-2
Tipping Hazards and Rated Load . . . . . 3-2
Work Environment Hazards . . . . . . . . . . . 3-4
Unsafe Operation Hazards. . . . . . . . . . . . 3-5
FallHazards...........................3-6
Collision Hazards . . . . . . . . . . . . . . . . . . . . . 3-7
Crush Hazards . . . . . . . . . . . . . . . . . . . . . . . . 3-8
Explosion and Fire Hazards. . . . . . . . . . . 3-8
Damaged Machine Hazards . . . . . . . . . . 3-8
Bodily Injury Hazards . . . . . . . . . . . . . . . . . 3-9
Battery Hazards . . . . . . . . . . . . . . . . . . . . . . . 3-9
Welding and Polishing Requirements 3-11
After Using the Machine. . . . . . . . . . . . . . 3-11
4 Jobsite Inspection............... 4-1
5 Pre-operation Inspection ...... 5-1
Tips for Conducting a Pre-operation
Inspection.............................5-1
Conducting a Pre-operation
Inspection.............................5-2
Inspecting Parts . . . . . . . . . . . . . . . . . . . . . . . 5-2
Inspecting Entire Machine . . . . . . . . . . . . 5-2
Inspect Hydraulic Oil Level . . . . . . . . . . . . 5-3
Inspecting Engine Oil Level . . . . . . . . . . . 5-3
Inspecting Fuel Level . . . . . . . . . . . . . . . . . 5-4
Inspecting Coolant Level (water-
cooled engine) . . . . . . . . . . . . . . . . . . . . . . . . 5-5
Inspecting the Battery . . . . . . . . . . . . . . . . . 5-6
6 Pre-operation Function Test .. 6-1
Testing the Ground Controller (DTC
System) ...............................6-1
Preparation . . . . . . . . . . . . . . . . . . . . . . . . . 6-3
Ground/Platform select switch . . . . . . 6-4
Engine start switch. . . . . . . . . . . . . . . . . . 6-4
Emergency stop button . . . . . . . . . . . . . 6-4
Glow plug switch. . . . . . . . . . . . . . . . . . . . 6-4
Engine speed select switch . . . . . . . . . 6-4
Platform up/down function . . . . .. . . . . 6-4
Emergency lowering . . . . . . . . . . . . . . . . 6-5
Regeneration function . . . . . . . . . . . . . . 6-5
Testing the Ground Controller (-
Sinoboom Control System) . . . . . . . . . . . 6-5
Preparation . . . . . . . . . . . . . . . . . . . . . . . . . 6-7
Ground/Platform select switch . . . . . . 6-8
Ignition switch. . . . . . . . . . . . . . . . . . . . . . . 6-8
Emergency stop button . . . . . . . . . . . . . 6-8
Glow plug switch. . . . . . . . . . . . . . . . . . . . 6-8
Engine speed select switch . . . . . . . . . 6-8
Platform up/down function . . . . .. . . . . 6-8
Emergency lowering . . . . . . . . . . . . . . . . 6-9
Regeneration function . . . . . . . . . . . . . . 6-9
Testing the Platform Controller (DTC
System) ...............................6-9
Preparation . . . . . . . . . . . . . . . . . . . . . . . . 6-11
Engine start switch. . . . . . . . . . . . . . . . . 6-11
Emergency stop button . . . . . . . . . . . . 6-11
Engine preheat switch . . . . . . . . . . . . . 6-11
Horn button . . . . . . . . . . . . . . . . . . . . . . . . 6-11
Lighting switch (optional) . . . . . . . . . . 6-11
Engine speed select switch . . . . . . . .6-12
Hydraulic generator switch (if
equipped)..........................6-12
Platform lift switch . . . . . . . . . . . . .. . . .6-12

© Mar. 2022 ii 1323RD&1623RD Operation Manual
Steer thumb rocker switch . . . . . . . . .6-12
Drive switch. . . . . . . . . . . . . . . . . . . . . . . .6-12
Drive speed select switch. . . . . . . . . .6-12
Outrigger leveling . . . . . . . . . . . . . . . . . .6-13
Testing the Platform Controller (-
Sinoboom Control System) . . . . . . . . . .6-13
Preparation . . . . . . . . . . . . . . . . . . . . . . . .6-14
Ignition switch. . . . . . . . . . . . . . . . . . . . . .6-14
Emergency stop button . . . . . . . . . . . .6-14
Glow plug switch. . . . . . . . . . . . . . . . . . .6-14
Horn button . . . . . . . . . . . . . . . . . . . . . . . .6-14
Engine speed select switch . . . . . . . .6-15
Platform up/down function . . . . .. . . .6-15
Steer thumb rocker switch . . . . . . . . .6-15
Drive switch. . . . . . . . . . . . . . . . . . . . . . . .6-15
Climbing mode. . . . . . . . . . . . . . . . . . . . .6-16
Outrigger leveling . . . . . . . . . . . . . . . . . .6-16
Testing the Emergency Lowering
Function..............................6-16
Testing the Level Sensor . . . . . . . . . . . . .6-17
Testing the Drive Speed. . . . . . . . . . . . . .6-17
Testing the Oscillate Outriggers . . . . . .6-18
Testing the Weighing System . . . . . . . .6-18
7 Operating the machine ......... 7-1
Emergency Stop . . . . . . . . . . . . . . . . . . . . . . 7-1
Starting the Engine. . . . . . . . . . . . . . . . . . . . 7-1
Emergency Lowering . . . . . . . . . . . . . . . . . 7-2
Operation from Ground . . . . . . . . . . . . . . . 7-2
Selecting Engine Speed . . . . . . . . . . . . . . 7-3
Operation from Platform . . . . . . . . . . . . . . 7-3
Driving on a Slope. . . . . . . . . . . . . . . . . . . . . 7-4
Extending and Retracting the Platform 7-4
Operating the Outriggers. . . . . . . . . . . . . . 7-5
8 Transporting and Lifting the
Machine........................... 8-1
Releasing the Brake . . . . . . . . . . . . . . . . . . 8-1
Transporting the Machine . . . . . . . . . . . . . 8-1
Lifting the Machine with a Crane . . . . . . 8-2
9 Maintenance ...................... 9-1
Conducting a Pre-delivery Inspection . 9-1
Following a Maintenance Schedule . . . 9-2
Completing a Repair & Inspection
Report.................................9-2
Major Modification and Repair Record 9-5
10 Decals/Nameplates
Inspection ....................... 10-1
Decals/Nameplates(GB). . . . . . . . . . .10-2
Decals/Nameplates(AS) . . . . . . . . . . .10-5
Decals/Nameplates(CE-Imperial) .10-8
Decals/Nameplates(CE-Metric) . .10-11
Decals/Nameplates(CSA) . . . . .. . 10-14
Decals/Nameplates(ANSI). . . . . . . 10-17
Appendix 1: Symbols and
Description.......................A-1
Appendix 2: Prepare the Work
Record Before Delivery ....... A-5
Appendix 3: Repair & Inspection
Report .............................A-7
Appendix 4: Major Modification
and Repair Record ............A-11

1323RD&1623RD Operation Manual iii © Mar. 2022
INTRODUCTION
Thank you for choosing and using the machinery of
Hunan Sinoboom Intelligent Equipment Co., Ltd. Al-
ways read, understand and become familiar with the
operation requirements of the machine and its associ-
ated safety procedures before operating, maintaining
and repairing the machine. Operating the machine with-
out becoming familiar with its specific operation require-
ments and safety procedures poses serious risks.
Operators who follow safety rules and operate the ma-
chine carefully and effectively will prevent personal in-
jury, property loss and accidents.
Use this machine only to transport tools to work loca-
tions and for performing tasks on the work platform. Op-
erators must be competent and must obtain training to
carefully use the machine and follow safety procedures.
Only trained and authorized personnel may operate the
machine.
This manual guides the operator in operating and using
the machine. The operator is responsible for reading,
understanding and implementing the operation and
safety procedures in this manual and for following the
manufacturer’s instructions before beginning any work.
Read, understand and follow all safety rules and oper-
ating instructions. The operator must also consider the
machine’s uses and limitations and the conditions at
the jobsite before using this machine. Strictly following
all safety requirements in this manual is critical.
Consider this manual a part of the machine, along with
Maintenance Manual and Parts Manual, and always
keep the manuals with the machine. The owner or ad-
ministrator of the machine shall offer all manuals and
other necessary information provided by the machine
manufacturer regarding the daily inspection and main-
tenance to each of the renters. If the machine is sold,
the owner or administrator must pass along the man-
uals and other necessary information to the purchaser.
The owner or administrator of the machine shall also
provide the manufacturer’s maintenance information to
the person responsible for maintaining the machine.
If you have any questions, contact Hunan Sinoboom In-
telligent Equipment Co., Ltd..

© Mar. 2022 iv 1323RD&1623RD Operation Manual
This Page Intentionally Left Blank

1323RD&1623RD Operation Manual 1-1 © Mar. 2022
1MACHINE SPECIFICATIONS
Table 1-1 1323RD specifications
MEASURE 1323RD (METRIC) 4389RD (IMPERIAL)
DIMENSIONS
Max. platform height 13.1 m 42ft 11.7in
Max. working height 15.1 m 49ft 6.5in
Max. horizontal reach (rear
extension platform extended) 1.2 m 3ft 11.2in
Max. horizontal reach (front
extension platform extended) 1.5 m 4ft 11.1in
Overall length 4.88 m 16ft
Overall width 2.28 m 7ft 5.7in
Overall height (stowed, rails folded) 2.22 m 7ft 3.4in
Overall height (stowed, rails up) 2.98 m 9ft 9.3in
Wheelbase 2.84 m 9ft 3.8in
Wheel span 1.95 m 6ft 4.7in
Ground clearance 0.36 m 1ft 2.2in
Tire size (diameter × width / type) 33×12-20/solid 315/55D20/foam-filled
Platform dimension (Length × Width
× Height)-6.5 m Platform 3.96 m×1.82 m×1.1 m 13ft×6ft×3ft 7in
Platform dimension (Length × Width
× Height)-7.4 m Platform 4.84 m×1.82 m×1.1 m 15ft 10.6in×6ft×3ft 7in
PERFORMANCE
Rated platform capacity 680 kg 1499 lb
Individual extension platform
capacity 227 kg 500 lb
Max. platform occupancy 7 persons
Drive speed (stowed) 0～6.1 km/h 0～3.8 mph
Drive speed (raised) 0～1.1 km/h 0～0.68 mph
Up time (no load) 40～50 s
Down time (no load) 34～44 s
Gradeability 50% (26.6°)
Max. allowable inclination (front-to-
back) 3°

© Mar. 2022 1-2 1323RD&1623RD Operation Manual
MACHINE SPECIFICATIONS
Table 1-1 1323RD specifications (continued)
MEASURE 1323RD (METRIC) 4389RD (IMPERIAL)
Max. allowable inclination (side-to-
side, outrigger retracted/extended) 2°/0.8°
Max. outrigger leveling angle (front-
to-back) 7°
Max. outrigger leveling angle (side-
to-side) 12°
Turning radius (inside) 2.2 m 7ft 2.6in
Turning radius (outside) 5.3 m 17ft 4.7in
Max. allowable side force 400 N 90 lbf
Max. operating noise 86 dB
POWER
Drive mode (drive×steer) 4WD×2WS
Engine (rated power, RPM)
36.3 kW, 2800 rpm (Deutz D2011 L03i)
35.5 kW, 3000 rpm (Yanmar 4TNV88C-DFLT)
36.4kW, 3000 rpm (Yanmar 4TNV88-BDFLTC)
35.3kW, 3000 rpm (Yanmar 4TNV88-ZCDCSI)
Fuel tank capacity 110 L 24 gal (UK)/29 gal (US)
Hydraulic tank capacity 140 L 30.8 gal (UK)/37 gal (US)
Hydraulic system pressure 24 MPa 3481 psi
Battery specification (voltage,
capacity, rate of discharge) 12 V, 110 Ah, 5 hr
Power system voltage 12 VDC
System control voltage 12 VDC
GROUND BEARING INFORMATION
Max. tire load 3900 kg 8598 lb
Tire contact pressure 720 kPa 104 psi
Max. outrigger load 3200 kg 7055 lb
Outrigger contact pressure 630 kPa 91 psi
ENVIRONMENT
Max. allowable wind speed (indoor) 0 m/s 0 mph
Max. allowable wind speed
(outdoor)
12.5 m/s 28 mph
Max. allowable altitude 1000m 3280.8ft
Allowable ambient temperature
(lead-acid batteries) -10℃～40℃14℉～104℉
Allowable ambient temperature (-
lithium batteries) -20℃～40℃-4℉～104℉

MACHINE SPECIFICATIONS
1323RD&1623RD Operation Manual 1-3 © Mar. 2022
Table 1-1 1323RD specifications (continued)
MEASURE 1323RD (METRIC) 4389RD (IMPERIAL)
Max. allowable ambient relative
humidity 90%
Storage condition
Stored at -20℃to 50℃(-4℉to 122℉) in a well-ventilated environment
with 90% relative humidity (20℃[68℉]), and away from rain, sun,
corrosive gas, inflammables and explosives.
WEIGHT
Total weight 7700 kg 16976 lb
Table 1-2 1623RD specifications
MEASURE 1623RD (METRIC) 5389RD (IMPERIAL)
DIMENSIONS
Max. platform height 16.2 m 53ft 1.8in
Max. working height 18.2 m 59ft 8.5in
Max. horizontal reach (rear
extension platform extended) 1.2 m 3ft 11.2in
Max. horizontal reach (front
extension platform extended) 1.5 m 4ft 11.1in
Overall length 4.88 m 16ft
Overall width 2.28 m 7ft 5.7in
Overall height (stowed, rails folded) 2.44 m 8ft
Overall height (stowed, rails up) 3.21 m 10ft 6.3in
Wheelbase 2.84 m 9ft 3.8in
Wheel span 1.95 m 6ft 4.7in
Ground clearance 0.36 m 1ft 2.2in
Tire size (diameter × width / type) 33×12-20/solid 315/55D20/foam-filled
Platform dimension (Length × Width
× Height)-6.5 m Platform 3.96 m×1.82 m×1.1 m 13ft×6ft×3ft 7in
Platform dimension (Length × Width
× Height)-7.4 m Platform 4.84 m×1.82 m×1.1 m 15ft 10.6in×6ft×3ft 7in
PERFORMANCE
Rated platform capacity 680 kg 1499 lb
Individual extension platform
capacity 227 kg 500 lb
Max. platform occupancy 4 persons
Drive speed (stowed) 0～6.1 km/h 0～3.8 mph
Drive speed (raised) 0～1.1 km/h 0～0.68 mph

© Mar. 2022 1-4 1323RD&1623RD Operation Manual
MACHINE SPECIFICATIONS
Table 1-2 1623RD specifications (continued)
MEASURE 1623RD (METRIC) 5389RD (IMPERIAL)
Uptime (no load) 70 s～90 s
Downtime (no load) 45 s～55 s
Gradeability 40% (22°)
Max. allowable inclination (front-to-
back) 3°
Max. allowable inclination (side-to-
side, outrigger retracted/extended) 2°/0.8°
Max. outrigger leveling angle (front-
to-back) 7°
Max. outrigger leveling angle (side-
to-side) 12°
Turning radius (inside) 2.2 m 7ft 2.6in
Turning radius (outside) 5.3 m 17ft 4.7in
Max. allowable side force 400 N 90 lbf
Max. operating noise 86 dB
POWER
Drive mode (drive×steer) 4WD×2WS
Engine (rated power, RPM)
36.3 kW, 2800 rpm (Deutz D2011 L03i)
35.5 kW, 3000 rpm (Yanmar 4TNV88C-DFLT)
36.4kW, 3000 rpm (Yanmar 4TNV88-BDFLTC)
35.3kW, 3000 rpm (Yanmar 4TNV88-ZCDCSI)
Fuel tank capacity 110 L 24 gal (UK)/29 gal (US)
Hydraulic tank capacity 140 L 30.8 gal (UK)/37 gal (US)
Hydraulic system pressure 24 MPa 3481 psi
Battery specification (voltage,
capacity, rate of discharge) 12 V, 110 Ah, 5 hr
Power system voltage 12 VDC
System control voltage 12 VDC
GROUND BEARING INFORMATION
Max. tire load 3900 kg 8598 lb
Tire contact pressure 720 kPa 104 psi
Max. outrigger load 3200 kg 7055 lb
Outrigger contact pressure 630 kPa 91 psi
ENVIRONMENT
Max. allowable wind speed (indoor) 0 m/s 0 mph
Max. allowable wind speed
(outdoor)
12.5 m/s 28 mph

MACHINE SPECIFICATIONS
1323RD&1623RD Operation Manual 1-5 © Mar. 2022
Table 1-2 1623RD specifications (continued)
MEASURE 1623RD (METRIC) 5389RD (IMPERIAL)
Max. allowable altitude 1000m 3280.8ft
Allowable ambient temperature
(lead-acid batteries) -10℃～40℃14℉～104℉
Allowable ambient temperature (-
lithium batteries) -20℃～40℃-4℉～104℉
Max. allowable ambient relative
humidity 90%
Storage condition
Stored at -20℃to 50℃(-4℉to 122℉) in a well-ventilated environment
with 90% relative humidity (20℃[68℉]), and away from rain, sun,
corrosive gas, inflammables and explosives.
WEIGHT
Total weight 8780 kg 19357 lb
NOTE:
a) The platform height plus the operator height (taken as 2m [6ft 7in]) is the working height.
b) In different areas, hydraulic oil, engine oil, coolant, fuel and lubricant should be added in accordance with the
environmental temperature.
c) In cold weather, auxiliary devices are needed to start the machines.
d) The ground bearing data is approximate, not considering different options and only applicable when it is safe
enough.
e) The loads of persons, accessories, tools and materials are factored into the rated platform capacity.
f) The total vibration value of the platform does not exceed 2.5m/s², and the maximum root-mean-square value of
the weighted acceleration of the entire machine does not exceed 0.5m/s².
g) The hydraulic tank capacity is the maximum volume in the hydraulic tank.

© Mar. 2022 1-6 1323RD&1623RD Operation Manual
This Page Intentionally Left Blank
MACHINE SPECIFICATIONS

1323RD&1623RD Operation Manual 2-1 © Mar. 2022
2MACHINE COMPONENTS
Figure 2-1
22
23
24
25
26
1
2
3
4
5
6
7
8
9
10
11
12
13
14 15 16
17
19
20
21
27
18

© Mar. 2022 2-2 1323RD&1623RD Operation Manual
MACHINE COMPONENTS
Table 2-1
1. Lanyard anchorage point 10. Safety Arm 19. Engine (inside the engine cover)
2. Fixed Platform 11. Lower Lift Cylinder 20. Transport tie-down position
3. Extended Platform 12. Outrigger 21. Chassis Assembly
4. Scissor Assembly 13. Non-steering Wheel 22. Oil cooler
5. Platform extension locking handle 14. Fuel Tank 23. Generator
6. Platform Entry Gate 15. Ladder 24. Maintenance-free battery
7. Fixed Platform Rail 16. Hydraulic Oil Tank 25. Ground Controller
8. Extended Platform Rail 17. Steer Wheel 26. Warning Light
9. Upper Lift Cylinder 18. Reducer 27.AC Power Socket
Machine positions
Stowed position:
The machine comes in stowed position when fully
retracted.
Non-operating position:
The machine remains in non-operating position when
the down limit switch does not disengage.
Operating/raised position:
The machine comes in operating/raised position
when the platform is raised until the down limit switch
disengages.
The platform height (from ground to platform floor) is
3±0.3m (9ft 10in±12in) when the down limit switch
disengages.