Sintrones VBOX-3611-4L User manual

VBOX-3611-4L
In-Vehicle Computing
User's Manual
Version 1.0
Document Name
VBOX-3611-4L User Manual
Document No.
UM2018361110-2
Version
1.0
Date
July 23, 2018
Reversion History :
Reversion
Date
Notes
Author(s)
From
To
1.0
July 23, 2018
Initial Document Issued
Stanley Chou

User’s Manual Page i
SINTRONES® Technology Corp.
User Manual
Copyright
©2009 by SINTRONES® Technology Corp. All Rights Reserved.
No part of this publication may be reproduced, transcribed, stored in a retrieval system,
translated into any language, or transmitted in any form or by any means such as
electronic, mechanical, magnetic, optical, chemical, photocopy, manual, or otherwise,
without prior written permission from SINTRONES® Technology Corp.
Other brands and product names used herein are for identification purposes only and
may be trademarks of their respective owners.
Disclaimer
SINTRONES® Technology Corp. shall not be liable for any incidental or consequential
damages resulting from the performance or use of this product.
SINTRONES® Technology Corp. makes no representation or warranty regarding the
content of this manual. Information in this manual had been carefully checked for
accuracy; however, no guarantee is given as to the correctness of the contents. For
continuing product improvement, SINTRONES® Technology Corp. reserves the right to
revise the manual or make changes to the specifications of this product at any time
without notice and obligation to any person or entity regarding such change. The
information contained in this manual is provided for general use by customers.
This device complies to Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must withstand any background interference including those that may
cause undesired operation.

User’s Manual Page ii
Safety Information
Read the following precautions before setting up a SINTRONES Product.
Electrical safety
◼To prevent electrical shock hazard, disconnect the power cable from the electrical
outlet before relocating the system.
◼When adding or removing devices to or from the system, ensure that the power
cables for the devices are unplugged before the signal cables are connected. If
possible, disconnect all power cables from the existing system before you add a
device.
◼Before connecting or removing signal cables from the motherboard, ensure that all
power cables are unplugged.
◼Seek professional assistance before using an adapter or extension cord. These
devices could interrupt the grounding circuit.
◼Make sure that your power supply is set to the correct voltage in your area. If you
are not sure about the voltage of the electrical outlet you are using, contact your
local power company.
◼If the power supply is broken, do not try to fix it by yourself. Contact a qualified
service technician or your retailer.
Operation safety
◼Before installing the motherboard and adding devices on it, carefully read all the
manuals that came with the package.
◼Before using the product, make sure all cables are correctly connected and the
power cables are not damaged. If you detect any damage, contact your dealer
immediately.
◼To avoid short circuits, keep paper clips, screws, and staples away from connectors,
slots, sockets and circuitry.
◼Avoid dust, humidity, and temperature extremes. Do not place the product in any
area where it may become wet.
◼Place the product on a stable surface.
◼If you encounter technical problems with the product, contact a qualified service
technician or your retailer.

User’s Manual Page iii
CAUTION
Incorrectly replacing the battery may damage this computer. Replace only with the same
or its equivalent as recommended by SINTRONES® Technology Corp. Dispose used battery
according to the manufacturer's instructions.
Technical Support
Please do not hesitate to call or e-mail our customer service when you still cannot fix
the problems.
Tel : [phone]
Fax : [phone]
E-mail : [e-mail]
Website : www.sintrones.com

User’s Manual Page iv
TABLE OF CONTENTS
Page #
1.0 Introduction................................................................................................................................1-1
1.1 Model Specification ..............................................................................................................1-1
1.2 VBOX-3611-4L Illustration (MB, System) ........................................................................1-3
1.3Architecture ...........................................................................................................................1-5
1.4Principal component Specification ...................................................................................1-5
2.0 INTERNAL CONNECTOR .............................................................................................................2-1
2.1MINI PCI-E Connector (MINICARD1) .................................................................................2-1
2.2MINI PCI-E Connector (MINICARD2) .................................................................................2-3
2.3MINI PCI-E Connector (MINICARD3) .................................................................................2-5
2.4NGFF Connector.....................................................................................................................2-7
2.5DIO1 JST Connector ..............................................................................................................2-9
2.6COM JST Connector (COM3) ..............................................................................................2-10
2.7COM JST Connector (COM4) ..............................................................................................2-11
2.8USB JST Connector (USB3) ................................................................................................2-12
2.9SATA Connector...................................................................................................................2-13
2.10 LINE IN JST Connector........................................................................................................2-14
2.11 SATAPWR JST Connector...................................................................................................2-15
2.12 VGA JST Connector..............................................................................................................2-16
2.13 UPS JST Connector...............................................................................................................2-17
2.14 BAT Power Connector........................................................................................................2-18
3.0 External Connector Specification ............................................................................................3-1
3.1DP Connector .........................................................................................................................3-1
3.2DVI Connector........................................................................................................................3-2
3.3DC PWR Connector................................................................................................................3-3
3.4COM Connector (COM1) .......................................................................................................3-4
3.5COM Connector (COM2) .......................................................................................................3-5
3.6USB3.0 Connector (USB1)....................................................................................................3-6
3.7USB3.0 Connector (USB2)....................................................................................................3-7
3.8PWROUT Connector..............................................................................................................3-8
4.0 System Installation ....................................................................................................................4-1

User’s Manual Page v
4.1System Introduction.............................................................................................................4-1
4.2 Opening Chassis.....................................................................................................................4-2
4.3 Installing Memory.................................................................................................................4-4
4.4Installing MINI PCIe Expansion Card (PCIe 1, 3G/LTE Module only) .........................4-6
4.5Installing MINI PCIe Expansion Card (PCIe 2).................................................................4-8
4.6 Installing MINI PCIe Expansion Card (PCIe 3)...............................................................4-10
4.7Installing M.2 Module.........................................................................................................4-12
4.8Installing Internal Antenna Cable....................................................................................4-14
4.9Installing SIM Card..............................................................................................................4-18
4.10 Installing HDD......................................................................................................................4-20
5.0 System Resource.........................................................................................................................5-1
5.1Ignition Power Management Quick Guide .......................................................................5-1
6.0 BIOS ..............................................................................................................................................6-1
6.1 Enter The BIOS.......................................................................................................................6-1
6.2 Main .........................................................................................................................................6-3
6.3 Advanced ................................................................................................................................6-4
6.4 Chipset...................................................................................................................................6-10
6.5 Boot........................................................................................................................................6-13
6.6 Security .................................................................................................................................6-15
6.7 Exit .........................................................................................................................................6-16
7.0 Packing List.................................................................................................................................7-1
7.1 Packing List ............................................................................................................................7-1

1.0 Introduction
User’s Manual
1.0
INTRODUCTION

1.0 Introduction
User’s Manual Page 1-1
1.0 INTRODUCTION
1.1 Model Specification
System
CPU
Intel Gen 6 Core i7-6600U 2.6GHz up to 3.4GHz
Intel Gen 6 Core i5-6300U 2.4GHz up to 3.0GHz
Intel Gen 6 Core i3-6100U 2.3GHz
Intel Gen 6 Dual Core 3955U 2.0GHz
Memory
2 x DDR4 2133MHz SO-DIMM up to 32GB
Chipset
Intel 6th Generation Core SoC Processor
LAN Chipset
Intel I210-AT Gb/s Ethernet Controllers Onboard
Support PXE and WOL
Audio
Realtek ALC662 HD Codec onboard
Watchdog
Watchdog Timer Support, Offer 1 –255 Step
TPM
2.0
Power Requirement
Power Input
9V-48V DC Power input
Power Protection
Automatics Recovery Short Circuit Protection
Power Management
Vehicle Power Ignition for Variety Vehicle
Power Off Control
Power off Delay Time Setting by BIOS and Software
Battery
Internal Battery Kit for 10 Mins Operating (Optional)
Storage
Type
2 x 2.5”Drive Bay for SATA Type HDD / SSD, Support RAID 0, 1, 5
1 x SATA DOM

1.0 Introduction
User’s Manual Page 1-2
Graphics
Graphics
Intel® HD Graphics 520
DirectX Video Acceleration (DXVA) for Accelerating Video
Processing - Full AVC/VC1/MPEG2 HW Decode
Supports DirectX 11/10.1/10/9 and OpenGL 4.0
Resolution
Max Resolution (HDMI 1.4) : 4096 x 2304@24Hz
Max Resolution (DP) : 4096 x 2304@60Hz
I/O
Serial Port
4 x RS-232 (2 with RS-422/485 (Auto Direction Control))
USB Port
2 x USB 3.0 Ports, 2 x USB 2.0 Ports
LAN
4 x RJ-45 Ports for GbE POE (1 port with iAMT)
Video Port
1 x DVI-I*, 1 x VGA and 1 x DP (support Triple Independent Display)
*Use only with Single Link DVI Cables.
DIO Port
4 in and 4 out
Audio
1 x Line-out and 1 x Mic-in (Line-in Optional)
SIM Card Socket
2 x SIM Card sockets supported onboard with eject
Expansion Bus
3 x mini-PCIe cards, 1 x M.2 2230 A-E Key
Environment
Operating Temp.
-40ºC ~ 70ºC
Storage Temp.
-40ºC ~ 85ºC
Relative Humidity
0% RH–95% RH
Vibration (random)
IEC60068-2-64, random, 2.5G@5~500Hz, 1hr/axis with SSD
Vibration Operating
MIL-STD-810G, Method 514.6, Procedure I, Category 4
Shock
Operating: MIL-STD-810G, Method 516.6, Procedure I,
Trucks and semi-trailers=15G (11ms) with SSD
Crash Hazard
MIL-STD-810G, Method 516.5, Procedure V,
Ground equipment=100
Certifications
CE, FCC Class A, E-13
Mechanical
Construction
Aluminum alloy
Mounting
Supports both of wall-mount/VESA-mount
Weight
1.980 kg (bare-bone)
Dimensions
250 x 150 x 55 mm

1.0 Introduction
User’s Manual Page 1-3
1.2 VBOX-3611-4L Illustration (MB, System)
Main Board

1.0 Introduction
User’s Manual Page 1-4
System

1.0 Introduction
User’s Manual Page 1-5
1.3 Architecture
1.4 Principal component Specification
CPU
Chip
Description
Intel
1. Power consumption:
CPU
Core Frequency
Cache
TDP
Tj
i7-6600U
2.6 GHz
4MB
15 W
100°C
i5-6300U
2.4 GHz
3MB
15 W
100°C
i3-6100U
2.3 GHz
3MB
15 W
100°C
Celeron 3955U
2.0 GHz
2MB
15 W
100°C

2.0 Internal Connector Specification
User’s Manual
2.0
INTERNAL CONNECTOR
SPECIFICATION

2.0 Internal Connector Specification
User’s Manual Page 2-1
2.0 INTERNAL CONNECTOR
2.1 MINI PCI-E Connector (MINICARD1)
Connector size
2 X 26 = 52 Pin
Connector type
MINI PCI-E CON 9.2mmH
Connector
location
MINICARD1
Connector pin
definition
Pin
Signal
Pin
Signal
1
PCIE_WAKE#
2
3VSB
3
NC
4
GND
5
NC
6
NC
7
NC
8
UIM_PWR_A
9
GND
10
UIM_DAT_A
11
NC
12
UIM_CLK_A
13
NC
14
UIM_RST_A
15
GND
16
NC
17
NC
18
GND
19
NC
20
MINICARD0_DIS#
21
GND
22
PCIE_RST#
23
NC
24
3VSB
25
NC
26
GND
27
GND
28
NC
29
GND
30
NC
31
NC
32
NC
33
NC
34
GND
35
GND
36
USB_4N
37
GND
38
USB_4P
39
3VSB
40
GND
41
3VSB
42
LED_WWAN_A#
43
GND
44
NC
45
NC
46
NC
47
NC
48
NC
49
NC
50
GND
51
NC
52
3VSB

2.0 Internal Connector Specification
User’s Manual Page 2-2
Connector map
MINICARD1

2.0 Internal Connector Specification
User’s Manual Page 2-3
2.2 MINI PCI-E Connector (MINICARD2)
Connector size
2 X 26 = 52 Pin
Connector type
MINI PCI-E CON 9.2mmH
Connector
location
MINICARD2
Connector pin
definition
Pin
Signal
Pin
Signal
1
PCIE_WAKE#
2
3VSB
3
NC
4
GND
5
NC
6
+1.5V
7
MINICARD2_CLKREQ#
8
UIM_PWR_B
9
GND
10
UIM_DAT_B
11
PCIE1_MCARD2_CLK_DN
12
UIM_CLK_B
13
PCIE1_MCARD2_CLK_DP
14
UIM_RST_B
15
GND
16
NC
17
NC
18
GND
19
NC
20
MINICARD2_DIS#
21
GND
22
PCIE_RST#
23
PCIE1_MCARD2_RX_N
24
3VSB
25
PCIE1_MCARD2_RX_P
26
GND
27
GND
28
+1.5V
29
GND
30
SMB_CLK
31
PCIE1_MCARD2_TX_N
32
SMB_DATA
33
PCIE1_MCARD2_TX_P
34
GND
35
GND
36
USB_5N
37
GND
38
USB_5P
39
3VSB
40
GND
41
3VSB
42
NC
43
GND
44
NC
45
NC
46
NC
47
NC
48
+1.5V
49
NC
50
GND
51
NC
52
3VSB

2.0 Internal Connector Specification
User’s Manual Page 2-4
Connector map
MINICARD2

2.0 Internal Connector Specification
User’s Manual Page 2-5
2.3 MINI PCI-E Connector (MINICARD3)
Connector
size
2 X 26 = 52 Pin
Connector
type
MINI PCI-E CON 9.2mmH
Connector
location
MINICARD3
Connector
pin
definition
Pin
Signal
Pin
Signal
1
PCIE_WAKE#
2
3VSB
3
NC
4
GND
5
NC
6
+1.5V
7
MINICARD3_CLKREQ#
8
NC
9
GND
10
NC
11
PCIE2_MCARD3_CLK_DN
12
NC
13
PCIE2_MCARD3_CLK_DP
14
NC
15
GND
16
NC
17
NC
18
GND
19
NC
20
MINICARD3_DIS#
21
GND
22
PCIE_RST#
23
PCIE2_MCARD3_RX_N
24
3VSB
25
PCIE2_MCARD3_RX_P
26
GND
27
GND
28
+1.5V
29
GND
30
SMB_CLK
31
PCIE2_MCARD3_TX_N
32
SMB_DATA
33
PCIE2_MCARD3_TX_P
34
GND
35
GND
36
USB_9N
37
GND
38
USB_9P
39
3VSB
40
GND
41
3VSB
42
NC
43
GND
44
NC
45
NC
46
NC
47
NC
48
+1.5V
49
NC
50
GND
51
NC
52
3VSB

2.0 Internal Connector Specification
User’s Manual Page 2-6
Connector
map
MINICARD3

2.0 Internal Connector Specification
User’s Manual Page 2-7
2.4 NGFF Connector
Connecto
r size
2 X 34 = 67 Pin
Connecto
r type
NGFF _AE KEY_H:8.5mm
Connecto
r location
NGFF1
Connecto
r pin
definition
Pin
Signal
Pin
Signal
1
GND
2
3VSB
3
USB_7P
4
3VSB
5
USB_7N
6
NC
7
NC
8
NC
9
NC
10
NC
11
NC
12
NC
13
NC
14
NC
15
NC
16
NC
17
NC
18
NC
19
NC
20
NC
21
NC
22
NC
23
NC
24
KEY
25
KEY
26
KEY
27
KEY
28
KEY
29
KEY
30
KEY
31
KEY
32
NC
33
GND
34
NC
35
PCIE9_M.2_TX_0P
36
NC
37
PCIE9_M.2_TX_0N
38
NC
39
GND
40
NC
41
PCIE9_M.2_RX_0P
42
NC
43
PCIE9_M.2_RX_0N
44
NC
45
GND
46
NC
47
PCIE9_M.2_CLK_0P
48
NC
49
PCIE9_M.2_CLK_0N
50
NC
51
GND
52
M.2_RST
53
M.2_CLKREQ0#
54
M.2_DIS2#
55
PCIE_WAKE0#
56
M.2_DIS1#
57
GND
58
NC
59
NC
60
NC
61
NC
62
NC
63
GND
64
NC
65
NC
66
PCIE_RST#
67
NC
68
M.2_CLKREQ1#
69
GND
70
PCIE_WAKE0#
71
NC
72
NC
73
NC
74
NC
75
GND