Form
#
Z541
Model
5093
&
5093L
Date2-02/A
1
"
Super Duty
"D"
HandleImpactTools
c?
bl
1
IMPORTANT
I
I
Readthese instructionscarefully beforeinstalling,operating,servicing or repairingthis
tool. Keep these instructions ina safe accessible place.
SAFETY MESSAGES
Personal
Safety
Equipment
Use
-
SafetyGlasses
YES
-
--
--
--
Safety ruleswhen using a
509315093L
Impact
Tool
Use
-
Safety Gloves
Use
-
Safety Boots
Use
-
BreathingMasks
Use
-
Ear Protectors
YES
-
Useonlyimpactsocketsandextensions,universaljoints,
etc., ratedas beinosuitablefor usewithimpacttools.
A
WARNING
Always Read InstructionsBefore
@
UsingPowerTools
-
Prolongedexposureto vibration may cause injury.
-
Readallinstructionsbeforeusinathistool.All ooerators
must
Operator Instructions
Includes:
Safety Rules
@
AlwaysWear SafetyGoggles
@
Wear HearingProtection
Avoid ProlongedExposure
ti23
T
oVibration
befullytrainedin
its
use
and
a&
of
these
safety
rules.
-
Donot exceedthe maximumworking air pressure.
ForeseenUse
Work
Stations
PuttingInto Service
Operating
Dismantlingand Assembly.
-
Use personalprotectionequipmentas recommended.-
Somedust created
by
power sanding, sawing, grinding,
drilling, and other construction activities contains
chemicalsknowntocausecancer, birthdefectsandother
reproductiveharm.
-
Usecompressedair
only
at
the
recommendedconditions.
-
If the tool appears to malfunction, remove from use
immediatelyandarrangefor service andrepair. Ifitisnot
practicaltoremovetoolfromservice,thenshutofftheair
supply to the tool and write or have written a warning
noteandattachittothe tool.
-
If tool isto be usedwith a balancer or other suspension
device, ensure that the tool is firmly attached to the
suspensionlsupportdevice.
-
When operating the tool, always keep the body and
particularlythehandsaway fromtheworkingattachment
fixed to the tool.
-
The toolis not electricallyinsulated.Never usethetool if
there is any chance of coming into contact with live
electricity.
-
Always when usingthe tool, adopt a firm footingand/or
position and rip the tool sufficiently only to overcome
any reactionforces that may resultfrom the tool doing
work. Donotovergrip.
-
Useonly correctsparepartsfor maintenanceandrepair.
Do not improvise or make temporary repairs. Major
servicing and repairs should only be carried out by
personstrainedto do so.
-
Do not lock, tape, wire, etc. the 'OnIOff' valve in 'On'
position.Thethrottletriggernever,etc.mustalwaysbefree
to returnto the 'Off' positionwhen released.
-
Always shut off the air supply to the tool and press the
'On/Off' valve to exhaust the air from
the feed hose beforefitting, removing
7
or adjusting the working attachment
fittedtothetool.
-
Beforeusingthetool, makesurethata
shut off device has been fitted to the
supply line and the osition is known
and easily accessible so that the air
supply to the toolcanbe shut off inan
emergency.
-
Checkhoseandfittingsregularlyforwear.
-
Take care against entanglementof the
movina
Darts
ofthetoolwithdothina.hair.
ties,cleaningrags,rings,jewelry, watches;
bracelets,etc. This
could
causethe body
or
parts
of the
body
tobe drawntowards
andincontactwiththemoving
parts
ofthe
toolandcould
be
verydangerous.
-
Itisexpectedthat userswilladoptsafe workingpractices
and observe all local, regional or country legal
requirementswheninstalling,usingormaintainingthetool.
-
Take carethatthe exhaust airdoes notpointtowardsany
other person or material or substance that could be
contaminatedby oildroplets. Whenfirst lubricatinga tool
or if the tool exhaust has a highoil content, do not allow
theexhaust airto comenearvery hotsurfacesorflames.
-
Never lay thetooldownuntiltheworkingattachmenthas
stoppedmoving.
-
When the tool is not in use, shut off the air supply and
pressthrottle triggerlleverto drainthe supply line. If the
tool is not to be usedfor a periodof time, first lubricate,
disconnectfromairsupplyandstoreinadry averageroom
temperature environment.
-
If the tool is passedfrom one user to a new or inexperi-
enceduser, makesuretheseinstructionsareavailableto
bepassedwiththetool.
-
Do not remove any manufacturer fitted safety devices
where fitted, i.e., wheel guards, safety trigger, speed
governors, etc.
-
Wherever ossible,secureworkpiecewithclamps, avise,
etc. to make it rigidso itdoes not move during the work
operation. Keepgood balanceat alltimes. Donotstretch
or overreach.
-
Try to matchthe toolto the work operation. Do notusea
tool that istoo lightor heavyfor the work operation. If in
doubt, seek advice.
-
Ingeneralterms, this tool is not suitable for underwater
useor useinexplosive environments
-
seekadvicefrom
manufacturer.
-
Try tomakesure thatthe work areaisclearto enablethe
work task to be performed safely. If practical and
possible, try to clear unnecessary obstructions before
startingwork.
-
Always use air hose andcouplingswith minimumwork-
ing pressure ratings at least
1
112
times the maximum
workingpressure ratingof thetool.
Easy
To
ReachAnd
Air
Tool
Operate
Shut
Off
Valve
RecommendedAir Supply System Figure
1
PageNo
1
