SIP 05639 User manual

SIP Code: 05639, 05640
For help or advice please contact
your distributor, or sip directly
on:
Tel.: [phone]
Email:
[e-mail]
or
[e-mail]
www.sip-group.com
30” Drum Fans
SIP Industrial Products Limited
Gelders Hall Road
Shepshed
Loughborough
Leicestershire
LE12 9NH
United Kingdom
Please read and fully understand the instrucons in this manual before operaon. Keep
this manual safe for future reference.
Instrucon Manual

2
CONTENTS
Descripon Page No.
Safety Symbols Used Throughout This Manual 3
Safety Instrucons 3 - 5
Electrical Connecon 5 - 6
Technical Specicaon 7
Warranty 8
Contents & Accessories 8
Geng To Know Your Drum Fan - 05639 9
Geng To Know Your Drum Fan - 05640 10
Operang Instrucons 11
Wiring Diagram - 05639 12
Wiring Diagram - 05640 13
Exploded Drawing / Parts List - 05639 14
Exploded Drawing / Parts List - 05640 15
UK & EU - Declaraon of Conformity 16- 17
Notes 18 - 19
CONTENTS

3
SAFETY SYMBOLS USED THROUGHOUT THIS MANUAL
Danger / Cauon: Indicates risk of personal injury and/or the possibility of damage.
Warning: Risk of electrical injury or damage!
Note: Supplementary Informaon.
SAFETY INSTRUCTIONS
Important: Please read the following instrucons carefully, failure to do so could lead to serious
personal injury and / or damage to the drum fan.
When using your fan, basic safety precauons should always be followed to reduce the risk of re, electric shock,
personal injury and / or damage to the fan.
Read all of these instrucons before operang the fan and save this user manual for future reference.
The fan should not be modied or used for any applicaon other than that for which it was designed; It was de-
signed to safely and quietly move air in large volumes.
If you are unsure of its relave applicaons do not hesitate to contact us and we will be more than happy to ad-
vise you.
Before operang the fan always check no parts are broken, that all screws are completely ght and that no parts
are missing.
Always operate the fan safely and correctly.
KNOW YOUR FAN: Read and understand the owner's manual and labels axed to the fan. Learn its applicaons
and limitaons, as well as the potenal hazards specic to it.
DO NOT USE THE FAN IN DANGEROUS ENVIRONMENTS: Do not use your fan in damp or wet locaons, or expose
it to rain. Always provide adequate space around the drum fan.
STAY ALERT: Always watch what you are doing and use common sense when placing and operang the fan.
DISCONNECT THE FAN FROM THE MAINS SUPPLY: When not in use.
NEVER LEAVE THE FAN UNATTENDED: During operaon.
DO NOT ABUSE THE MAINS LEAD: Never pull the mains lead to remove the plug from the mains socket, or to
move the fan from place to place. Keep the mains lead away from heat, oil and sharp edges. If the mains ,

4
SAFETY INSTRUCTIONS….Cont
lead is damaged it must be replaced by the manufacturer or its service agent or a similarly qualied person in
order to avoid unwanted hazards.
HAVE YOUR FAN REPAIRED BY A QUALIFIED PERSON: The fan is in accordance with the relevant safety require-
ments. Repairs should only be carried out by qualied persons using original spare parts, otherwise this may re-
sult in considerable danger to the user and void the warranty.
USE RECOMMENDED PARTS ONLY: Unapproved and untested parts may be dangerous and will invalidate the
warranty.
• DANGER! Check that the fan is in sound condion and good working order. Take immediate acon to repair
or replace damaged parts.
• WARNING! Only operate on a level and stable surface.
• WARNING! Do not allow untrained persons to operate the fan and do not operate the fan without all co-
vers etc. correctly ed.
• WARNING! RISK OF ELECTRIC SHOCK. Do not expose the fan to water spray, rain, dripping water or mois-
ture of any kind.
• Do not leave the fan unaended when in use. Switch the fan o and unplug from the mains supply before
leaving the work area.
• Do not allow children or animals near the drum fan, parcularly when in use.
• Ensure that the drum fan is correctly turned o when not in use and store in a safe, dry area, out of reach
of children.
• Keep all combusble materials away from this drum fan.
• Never stand on the fan.
• DO NOT dismantle or tamper with the fan, this may be dangerous and will invalidate the warranty.
WARNING: Risk of Electric Shock!
• Use only the electrical power (voltage and frequency) specied on the model plate of the drum fan. If in
doubt contact the manufacturer.
• Use only a three-prong, grounded (earthed) outlet.
• Do not touch, or operate the fan when your hands are wet.
• Those who are not qualied electricians / engineers should not disassemble, repair or rebuild the fan.
• DO NOT unplug the fan by pulling the mains lead. Unplug by holding the plug.
• DO NOT use the fan when there is damage to the mains lead or plug.
• DO NOT use the fan close to the res.
• To reduce the risk of re or electric shock, do not use this fan with any solid-state speed control device.
• DO NOT use the fan outdoors.
• Always check all guards to make sure they are secure before starng the fan.

5
SAFETY INSTRUCTIONS….Cont
• Never insert ngers or any other object/s through the grill guard when the fan is in operaon.
• Never leave the fan unaended and ensure that children and pets are kept a safe distance from the fan.
• Turn the fan o and disconnect it from the mains supply when moving from one locaon to another.
• Turn the fan o and disconnect it from the mains supply when carrying out any repairs, maintenance or
cleaning.
• Do not use petrol or other corrosive liquids for cleaning as they may damage the fan or outer casing / grill.
• Do not operate the fan near an open window, such as on a window sill; rain or moisture may create an
electrical hazard.
• Never modify the fan in any way.
• Never operate the fan without all guards in place.
• Before each use; always check that the moving parts move freely and do not catch or bind.
• Stop operaon immediately if abnormalies are noced.
• Always clear the surface around where the fan is to be used to avoid unwanted dust or debris being pulled
through the fan.
If a problem with the drum fan is experienced, or if the mains lead or plug become damaged, contact your dis-
tributor for repair.
If the drum fan is used in a place of work all rules and laws etc. relang to the use of portable electrical applianc-
es should be followed.
Understand the operang environment; Before each use the operator should assess, understand and where pos-
sible reduce the specic risks and dangers associated with the operang environment. Bystanders should also be
made aware of any risks associated with the operang environment.
ELECTRICAL CONNECTION
WARNING! It is the responsibility of the owner and the operator to read, understand and comply with the fol-
lowing:
You must check all electrical products, before use, to ensure that they are safe.
You must inspect power cables, plugs, sockets and any other connectors for wear or damage.
You must ensure that the risk of electric shock is minimised by the installaon of appropriate safety devices; A
residual current circuit Breaker (RCCB) should be incorporated in the main distribuon board. We also recom-
mend that a residual current device (RCD) is used. It is parcularly important to use an RCD with portable prod-
ucts that are plugged into a supply.
CAUTION: The warnings and cauons menoned in this user manual can not cover all possible
condions and situaons that may occur. It must be understood by the operator that common
sense and cauon are factors which cannot be built into this product, but must be applied.

6
ELECTRICAL CONNECTION….Cont
Connecng to the power supply:
These SIP drum fans are ed with either a standard 230v ~ 13 amp or 110v ~ 16 amp type plug. Before using
the drum fan, inspect the mains lead and plug to ensure that neither are damaged. If any damage is visible have
the drum fan inspected / repaired by a suitably qualied person. If it is necessary to replace the plug a heavy du-
ty impact resistant plug would be preferable.
The wires for the plug are coloured in the following way:
Yellow / green Earth
Blue Neutral
Brown Live
As the colours of the wires may not correspond with the markings in your plug, proceed as follows: The wire
which is coloured blue, must be connected to the terminal marked with N or coloured black. The wire which is
coloured brown, must be connect-ed to the terminal, which is marked L or coloured red. The wire which is col-
oured yellow / green should be connected to the terminal which is coloured the same or marked .
Always secure the wires in the plug terminal carefully and ghtly. Secure the cable in the cord grip carefully.
Warning: Never connect live or neutral wires to the earth terminal of the plug. Only t an ap-
proved plug with the correct rated fuse. If in doubt consult a qualied electrician.
Note: Always make sure the mains supply is of the correct voltage and the correct fuse protec-
on is used. In the event of replacing the fuse always replace the fuse with the same value as
the original.
Note: If an extension lead is required in order to reach the mains supply; ensure that this too is
rated for the correct voltage and fuse rang.
Note: The cross secon of the extension lead should be checked so that is of sucient size so
as to reduce the chances of voltage drops.

7
TECHNICAL SPECIFICATION
Item No. 05639 05640
Supply 220-240V~ 50Hz 110V~ 50Hz
No. of Speed Sengs 22
Power Consumpon (W) - Low 109W 111W
Power Consumpon (W) - High 123W 123W
Input Current (A) - Low 0.48A 1.04A
Input Current (A) - High 0.53A 1.15A
Fan Ø 30” 30”
Air Flow - Low 9306 m3/hour 9284 m3/hour
Air Flow - High 10218 m3/hour 9777 m3/hour
Speed - Low 850 rpm 850 rpm
Speed - High 950 rpm 950 rpm
Noise Level (Max) 70.7 dB(A) 70.3 dB(A)
Protecon IP20 IP20
Net Weight 18.48 Kg 20.03 Kg

8
WARRANTY
These SIP drum fans are covered by a 12 month parts and labour warranty covering failure due to manufacturers
defects. This does not cover failure due to misuse or operang the fan outside the scope of this manual - any
claims deemed to be outside the scope of the warranty may be subject to charges Including, but not limited to
parts, labour and carriage costs. Consumables items such as fuses are not covered by the warranty.
In the unlikely event of warranty claims, contact your distributor as soon as possible.
Note: Proof of purchase will be required before any warranty can be honoured.
CONTENTS & ACCESSORIES
1x Drum Fan.
1x Instrucon Manual.
Note: If any of the above are missing or damaged, contact your distributor immediately.

9
GETTING TO KNOW YOUR DRUM FAN - 05639
Item Descripon Item Descripon
1Speed Control Knob 5Frame
2Motor 6Foot
3Handle 7Wheels
4Drum Body 8Fan Blade
1
2
3
4
8
6
5
7
Front Rear

10
GETTING TO KNOW YOUR DRUM FAN - 05640
Item Descripon Item Descripon
1Speed Control Knob 5Foot
2Motor 6Wheels
3Drum Body 7Fan Blade
4Frame 8Power Cord
1
2
6
5
7
4
3
Front Rear
8

11
OPERATING INSTRUCTIONS
Note: Always allow at least 1 metre clearance around the fan, failure to adhere to this will stop
the cooling air owing through the drum fan, this could damage the motor and void your war-
ranty.
The drum fan has 2 dierent speed sengs:
0 --- Stop
1 --- Low
2 --- High
•Turn the switch to the desired posion1 or 2 to start the fan.
•Turn the switch to “0” to stop the fan running.
Note: Never Run this fan whilst it`s raining, or in any damp or wet locaons, and never place it
on the window sill.

12
WIRING DIAGRAM - 05639

13
WIRING DIAGRAM - 05640

14
EXPLODED DRAWING / PARTS LIST - 05639
Item Descripon Item Descripon
1Front Guard 8Switch Box
2Blade Component 9Switch Knob
3Handle 10 Capacitor
4Drum 11 Power Cord
5Rear Guard 12 Triangle Knob
6Motor 13 Bracket
7Switch 14 Wheels

15
EXPLODED DRAWING / PARTS LIST - 05640
Item Descripon Item Descripon
1Front Guard 8Switch Knob
2Blade Component 9Capacitor
3Drum 10 Power Cord
4Rear Guard 11 Plum Knob
5Motor 12 Bracket
6Switch 13 Wheels
7Switch Box --

16
DECLARATION OF CONFORMITY (UKCA)
Declaraon of Conformity
We
SIP (Industrial Products) Ltd
Gelders Hall Road
Shepshed
Loughborough
Leicestershire
LE12 9NH
England
As the manufacturer within England, Scotland and Wales, we de-
clare that the
30” Drum Fans - SIP Part No. 05639 & 05640
Conforms to the requirements of the following regulaon(s), as indicated.
Electrical Equipment (Safety) Regulaons 2016
Electromagnec Compability Regulaons 2016
The Restricon of the Use of Certain Hazardous Substances in Electrical and Elec-
tronic Equipment Regulaons 2012
And the following harmonised standard(s)
BS EN55014-1:2017+A11:2020
BS EN61000-3-2:2019
BS EN61000-3-3:2013+A1:2019
BS EN60335-1:2012+A11:2014+A13:2017+A1:2019+A14:2019+A2:2019
BS EN60335-2-80:2003+A1:2004+A2:2009
BS EN62233:2008
Mr P. Ippaso - Managing Director - SIP (Industrial Products)
Ltd Date: 26/11/2022.
Signed:

17
DECLARATION OF CONFORMITY (CE)
Declaraon of Conformity
We
SIP Machinery Europe Ltd
Quayside Business Park
Dundalk
County Louth
As the manufacturer's authorised representave within the EC de-
clare that the
Conforms to the requirements of the following direcve(s), as indicated.
2014/35/EU
2014/30/EU
2015/863/EU &2011/65/EU
Low Voltage Directive
EMC Directive
RoHS Directive
Mr P. Ippaso - Managing Director - SIP (Industrial Products)
Ltd Date: 26/11/2022.
Signed:
30” Drum Fans - SIP Part No. 05639 & 05640
And the following harmonised standard(s)
EN55014-1:2017+A11:2020
EN61000-3-2:2019
EN61000-3-3:2013+A1:2019
EN60335-1:2012+A11:2014+A13:2017+A1:2019+A14:2019+A2:2019
EN60335-2-80:2003+A1:2004+A2:2009
EN62233:2008

18
NOTES

19
NOTES

Please dispose of packaging for the product in a
responsible manner. It is suitable for recycling. Help
to protect the environment, take the packaging to
the local amenity p and place into the appropriate
recycling bin.
Never dispose of electrical equipment or baeries
in with your domesc waste. If your supplier oers
a disposal facility please use it or alternatively
use a recognised recycling agent. This will allow
the recycling of raw materials and help protect the
environment.
Ref: 24NOV2022
FOR HELP OR ADVICE ON THIS
PRODUCT PLEASE CONTACT YOUR
DISTRIBUTOR, OR SIP DIRECTLY
ON:
TEL: [phone]
EMAIL: [e-mail] or
[e-mail]
www.sip-group.com