Sistemalux KUBE User manual

INSTRUCTIONS SHEET PAGE: 1 of 4
INS-626
9320 Boul. St-Laurent, suite 100, Montréal (Québec) Canada H2N 1N7
P.: 514.523.1339 F.: 514.525.6107 www.sistemalux.com
JP - R0Last update: April 17, 2020
IMPORTANT - READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE NATIONAL ELECTRICAL CODE AND ALL APPLICABLE LOCAL CODES, BY A PERSON FAMILIAR WITH THE
CONSTRUCTION AND OPERATION OF THE PRODUCT, AND THE HAZARDS INVOLVED. PROPER GROUNDING IS REQUIRED FOR SAFETY.
GROUND INSTALLATION IN CONCRETE WITH FLANGE (S.5350).
INTEGRAL DRIVER 120V
A
F
B
A- DIG A HOLE, PUT THE FLANGE AND ELECTRICAL CONDUIT INTO THE GROUND.
*MINIMUM OF 12" OF GRAVEL IS REQUIRED BELOW THE LUMINAIRE TO ALLOW PROPER DRAINAGE).
B- POUR CONCRETE AND MAKE SURE IT IS LEVELED WITH THE FLANGE.
C- REMOVE STICKER FROM THE FLANGE.
D- USING THE ALLEN KEY (INCLUDED), UNSCREW THE BOLLARD’S SET SCREWS AND REMOVE THE BOLLARD BODY.
E- FIX THE BOLLARD BASE TO THE FLANGE USING THE (4) SCREWS (INCLUDED).
F- LOWER THE BOLLARD BODY ON IT’S BASE AND SCREW IT BACK WITH THE (4) SET SCREWS USING THE ALLEN KEY.
FLANGE
GRAVEL
BOLLARD BODY
BOLLARD BASE
ELECTRICAL CONDUIT
CONCRETE
POWER
CABLE
90° OK NO!
NO!
C
D
E
STICKER
SCREWS
(INCLUDED)
SET SCREWS
ALLEN KEY
(INCLUDED)
C + D + E
SET SCREWS
ALLEN KEY
KUBE
MODELS: S.6340, S.6345, S.6346, S.6347

G- UNSCREW THE FIXTURE HEAD (4) SET SCREWS WITH THE ALLEN KEY (INCLUDED) AND REMOVE IT.
H- MAKE WIRE CONNECTIONS (FOLLOWING POLARITY MARKING) USING WATERTIGHT TWIST CONNECTORS (NOT INCLUDED).
I- FASTEN THE FIXTURE BASE TO THE BOLLARD BODY USING THE (4) SCREWS (INCLUDED).
J- SCREW THE FIXTURE HEAD (4) SET SCREWS TO THE BOLLARD BODY USING AN ALLEN KEY (INCLUDED).
INSTRUCTIONS SHEET PAGE: 2 of 4
INS-626
9320 Boul. St-Laurent, suite 100, Montréal (Québec) Canada H2N 1N7
P.: 514.523.1339 F.: 514.525.6107 www.sistemalux.com
JP - R0Last update: April 17, 2020
SCREWS
(INCLUDED)
G H
J
ALLEN KEY
(INCLUDED)
FIXTURE HEAD
SET SCREWS
POWER CABLE
ALLEN KEY
SET SCREWS
FIXTURE HEAD
BOLLARD BODY
FIXTURE BASE
WATERTIGHT
TWIST CONNECTORS
(NOT INCLUDED)
LIVE / DIM + BLACK
NEUTRAL / DIM - WHITE
GREEN
I
FIXTURE BASE
BOLLARD BODY
KUBE
MODELS: S.6340, S.6345, S.6346, S.6347

1.54"
(39mm)
INSTRUCTIONS SHEET PAGE: 3 of 4
INS-626
9320 Boul. St-Laurent, suite 100, Montréal (Québec) Canada H2N 1N7
P.: 514.523.1339 F.: 514.525.6107 www.sistemalux.com
JP - R0Last update: April 17, 2020
CABLE ENTRY
GROUND INSTALLATION ON ALTERNATIVE SURFACE WITHOUT FLANGE
INTEGRAL DRIVER 120V
A- UNSCREW THE FIXTURE HEAD (4) SET SCREWS WITH AN ALLEN KEY (INCLUDED) AND REMOVE IT.
B- DRILL (4) HOLES INTO THE SURFACE (SEE DIMENSIONS BELOW) AND INSTALL APPROPRIATE ANCHORS (NOT INCLUDED).
C- PASS THE FEEDER CABLE THROUGH THE ELECTRICAL CONDUIT AND MAKE WIRE CONNECTIONS (FOLLOWING POLARITY MARKING)
INSIDE A REMOTE JUNCTION BOX (PROVIDED BY OTHERS).
D- SCREW THE FIXTURE BASE TO THE SURFACE USING (4) #8 SCREWS (INCLUDED).
E- SCREW THE FIXTURE HEAD (4) SET SCREWS TO THE FIXTURE BASE USING THE ALLEN KEY.
2.32"
(59mm)
2.87"
(73mm)
9.13"
(232mm)
R 4.41"
(R 112mm)
6.22"
(158 mm)
A B
ALLEN KEY
(INCLUDED)
FIXTURE HEAD
SET SCREWS
D
C
E
ANCHORS
(NOT INCLUDED)
SURFACE
ALLEN KEY
FIXTURE HEAD
SET SCREWS
#8 SCREWS
WITH WASHERS
(NOT INCLUDED)
FIXTURE BASE
FEEDER CABLE
FIXTURE BASE
ELECTRICAL
CONDUIT
C + D
KUBE
MODELS: S.6340, S.6345, S.6346, S.6347
LIVE / DIM + BLACK
NEUTRAL / DIM - WHITE
GREEN

GROUND INSTALLATION WITH STAKE (S.3554).
INTEGRAL DRIVER 120V
A- SCREW THE STAKE TO THE FIXTURE BASE USING THE (4) PHILLIPS SCREWS (INCLUDED)
B- 1- USE A RUBBER MALLET TO INSERT STAKE INTO THE GROUND.
2- INSERT STAKE TO THE FIRST DISC TO INSURE A LEVELED POSITION WITH THE GROUND.
C- SCREW THE FIXTURE HEAD (4) SET SCREWS TO THE FIXTURE BASE USING THE ALLEN KEY.
D- BRING THE FEEDER CABLE TO A JUNCTION BOX (SUPPPLIED BY CONTRACTOR) AND MAKE WIRE CONNECTIONS (FOLLOWING POLARITY
MARKING) USING WATERTIGHT TWIST CONNECTORS (NOT INCLUDED).
INSTRUCTIONS SHEET PAGE: 4 of 4
INS-626
9320 Boul. St-Laurent, suite 100, Montréal (Québec) Canada H2N 1N7
P.: 514.523.1339 F.: 514.525.6107 www.sistemalux.com
JP - R0Last update: April 17, 2020
PHILLIPS SCREW
(INCLUDED)
STAKE
FIXTURE BASE
SET SCREWS
ALLEN KEY
FIXTURE HEAD
A B
FEEDER CABLE
STAKE
GROUND
KUBE
MODELS: S.6340, S.6345, S.6346, S.6347
C + D
C
D
LIVE / DIM + BLACK
NEUTRAL / DIM - WHITE
GREEN
1
RUBBER
MALLET
2