
Thank you for choosing your new tent from the Skandika range. It pro-
vides you with a lot of room and high level of comfort in the well-known
superior quality of Skandika.
Before you go on holiday with the new tent, please built it once.
Assembly instructions
Please follow these instructions point by point in the given order.
Poles and components: Remove all contents from tent bag•
Extent all tent poles carefully. Each pole end is colored to match the•
part of the tent that it belongs to.
Unfoldinnertentandrainyandlayonground•
Rain Fly
Unfoldtheysheetandspreadoutonthegroundinthedesired•
direction.
Locate the sleeve sections of the roof and insert the poles into their•
color corresponding sleeve.
Locateoneendofthepoleononesideofysheet,andinsertthe•
metal pin system into the end of the pole. Make sure poles locate into
correctpinsystem(allpolesfollowcorrespondingysheetseamsto
pin system).
Push the opposite side of the pole up into an arch shape and insert•
the second pin.
Theysheetshouldnowbereadyforpeggingout.Closeallzips•
ontheysheetbeforepegging.Youmaynditnecessarytoadjust
thepeggingpointinordertogettheoveralllayoftheysheetfabric
smoothandfreefromwrinklesorfolds.Onceyouaresatisedyou
can then peg out the rest of the loops.
Attach the guy ropes to all the guying points and peg securely at a•
suitable distance from the tent.
Inner tents
Takeaninnertentinsidetheassembledrainytoitsappropriate•
location.
Starting from the rear of the inner tent, stake down the corners along•
thebottomedgeoftherainy.
Hooktheinnertenttotheundersideoftherainystartingfromthe•
bottom rear and work your way forward to the top using the toggles on
the outer wall of the inner tent and loops running along the underside
oftherainy.
Repeat the above steps for the rest of the inner tents – you can leave•
some of the inner tents out to increase the living or storage capacity
and to reduce the travel weight of the whole tent.
Attention
Skandika tents are very easy to pitch. If one step of the assembly seems
difcult,don‘tuseforce,butlocatetheerror.
Care
When packing the tent make sure that it is completely dry, otherwise•
there is a danger of mildew and rotting.
Always pack poles and tent pegs separately from inner and outer tent.•
Prior to folding, clean the basement of the inner tent.•
Use a soft sponge and clear water only to clean the outer tent canvas.•
Don‘tuseanycleaningagent,fortheymaybeharmfultotheimp-
regnation.
Never pull tent pegs out by means of rings or tensioning ropes.•
NousnousréjouissonsquevousayezchoisiunetenteSKANDIKA.Ces
tentes offrent beaucoup d’espace et de confort et ceci en qualité supéri-
eure marque Skandika.
Pour ne pas courir de risques nous vous conseillons de faire un essai de
montage de la tente avant de partir en vacances.
Montage
Veuillez procéder point par point, l’ordre des différentes étapes est impor-
tant.
Tiges et accessoires : sortez le contenu complet du sac de tente•
Assemblez prudemment toutes les barres de tente. Chaque barre est•
marquée par une couleur correspondant à la couleur des fourreaux
sur la tente extérieure.
Ètalez le tapis de sol de la tente et la tente extérieure sur un sol lisse•
et autant que possible propre.
Tente extérieure
Étalez la tente extérieure sur le sol dans la position voulue.•
Triez et assemblez les arceaux et introduisez les dans les fourreaux•
(correspondant à la couleur des arceaux) de la tente extérieure.
Insérez le pin en métal (goupille) sur un des cotés de la tente extéri-•
euredansleboutdel‘arceau.Assurez–vousquel‘arceaucorrespond
bien au pin en métal.
Courbezcemêmearceauetintroduisezl‘autreextrémitédansle•
deuxième pin.
La tente extérieure est ainsi prête à être ancrée. Fermez toutes les•
fermetureséclairsdelatenteextérieureavantl‘encrage.Ilestpossi-
blequ‘ilsoitnécessairedechangerplusieursfoislespointsd‘ancrage
jusqu‘àcequelatenteneprésenteplusaucunpli.
Fixezlescordessurlespointsd‘ancrageettendez-lesàdistance•
convenable de la tente.
Tentes intérieures / Cabines
Installezconvenablementlacabineàl‘endroitprévupourcelle-cià•
l‘intérieurdelatente.
Encommençantparl‘arrièredelacabineaccrochezlescoinslelong•
du bord inférieur de la tente extérieure.
Accrochez la cabine au dessous de la tente extérieure, en commen-•
çantparlefond,travaillezdel’arrièreversl‘avantenutilisantlesclips
sur la paroi extérieure de la cabine et les anneaux correspondants sur
l’intérieur de la toile extérieure.
Répétez les étapes précédentes pour les autres cabines – vous pou-•
vez ne pas accrocher toutes les cabines pour augmenter la surface du
séjouroudestockageoupourdiminuerlepoidsdelatente.
Attention
LestentesSkandikasonttrèsfacilesàmonter.Encasdedifculténe
forcezpasmaischerchezlaraisonpossibleetlasolutionàladifculté
avant de continuer.
Entretien
Lors du démontage et pliage, prendre le temps de sécher chaque•
élémentand’évitertoutemoisissureetdécomposition.
Toujoursrangerlespointesetsardinesséparémentdestoilesintéri-•
eures et extérieures.
Nettoyer le fond de la tente intérieure avant de la plier.•
Nettoyer d’éventuelles salissures sur la tente à l’aide d’un linge doux•
et de l’eau claire. Ne pas utiliser de détergent car ceci pourrait détéri-
orer l’enduction protectrice.
Ne pas tirer sur les cordes d’ancrage pour extraire les sardines et•
pointes du sol.