Skullcandy BTG-363 User manual

FCC Information
ThisdevicecomplieswithPart 15 oftheFCC rules. Operationissubject tothefollowingtwoconditions:
(1)Thisdevicemaynot causeharmful interference, and
(2)Thisdevicemust accept anyinterferencereceived, includinginterferencethat maycauseundesiredoperation.
CAUTION: Changesormodificationsnot expresslyapprovedbythemanufacturermayvoidtheusersauthoritytooperatethisequipment.
NOTE: Thisequipment hasbeentestedand found tocomplywiththelimitsforaClass Bdigital devices, pursuant topart 15 oftheFCC Rules.
Theselimitsaredesignedtoprovidereasonableprotection againstharmfulinterference inaresidentialinstallation.Thisequipmentgenerates,usesandcanradiatedradiofrequency
energyand, ifnot installedandusedinaccordancewiththeinstructions,maycauseharmfulinter
ferencetoradiocommunications,However, thereisnoguarantee thatinterferencewill
notoccurinparticularinstallation.Ifthisequipmentdoescauseharmful interferencetoradioortelevisionreception,whichcanbedeterminedbyturningtheequipmen
toffand on, the
userisencouragedtotrytocorrect theinterferencebyoneormoreofthefollowingmeasures:
l Reorient orrelocatethereceivingantenna
l Increasetheseparationbetweentheequipment and thereceiver
l Consult thedealeroranexperienceradio/TVtechnicianforhelp.
Themanufacturerisnotresponsibleforanyradio
orTVinterferencecausedbyunauthorizedmodificationstothisequipment.Suchmodificationscouldvoidtheuserauthoritytooperate
theequipment.

BTG-363 M/1
Thank you for selecting Skullcandy Stereo Bluetooth helmet BTG-363. This model provides
skiers with
the ability to receive stereo audio transmitted via Bluetooth wireless technology
along with hands-free operation
of Bluetooth-enabled cell phones. When paired with a
mobile phone, this headset allows
to switch back and forth between the audio source and
a phone call. The audio source
for this headset can be any audio device that is
Bluetooth-enabled to comply with A2DP (Advanced Audio Distribution Profile) specification.
The cell phone must be compliant with Bluetooth specification version 1.1 or 1.2. This
model still
can be used as wired headphone when Bluetooth switches off.
Contents of package
--BTG-363 stereo Bluetooth headset
-- USB Cable for power supply
-- Cable with 3.5mm plug on both ends for wired audio source
--Instruction manual
pow er b ut t on
jBl ue LED 7-
Re d LED
mu ltifu n ctio n b ut to n
voice dialing B ut t on

bac kw ard b utton for wa r d bu t ton
1 Charging the headset
1.R ed LED blinking every 2 seconds when battery is l ow, meanwhile beep ing sou nd can be
heard in 20 seconds for charger reminder
2. Plug USB connector into the USB charg ing socket. The Red LED light keep in bright to
indi
cate the headset battery is charg i ng .
3.
On cethe indi cator li ghtturns off, the headset is f ully charged and can be removed f rom
the power supply
USB charging socket

2. Pairing the headset
1. Ensure the headset is off.
2. Press the power button on headset for 5 seconds, then Blue LED and Red LED fast flash
by turns
3. Put mobile phone into pairing mode (see the instructions which came with cell phone).
Ensure that the mobile phone
is no more than 1 meter away from the headset.
4. when mobile phone finds the headset, BT-helmet will be shown on the phone's display.
5, Enter the passwords number: 0000
If pairing is successful, the blue lightwill slow flashing every 2 seconds, now the headset is
now ready for operation and can be used.
If the headset is in paring model, but there's no pairing action by user in following 5
minutes, then headset will be switched off automatically for power saving.
3. Use/call management
Powering on/off the headset
To switch the headset on, press and hold the Power button for about 3 seconds. The blue
LED will flash fast (3 times in 2 seconds )and beeping sound is heard.
To switch the headset off, press and hold the Power button for about 3 seconds, the red
LED flash 3 times and beeping sound is heard, and then the headset is turn off .
Change Volume
To increase the volume ( Voice and bluetooth music), press Vol+ Button , to decrease the
volume (
Voice and bluetooth music), press Vol- Button.
Play Forward &Play backward
Press play forward button &backward button for Bluetooth music choice.
Play/Pause
Press Multifunction button for Bluetooth music Play/Pause.
Accepting/Rejecting a call
When the phone rings( ring tone can be heard in headset), briefly press the multifunction
button for phone answer, Press and hold multifunction for more than 3 second for call
rejection.
Ring tone can be heard in headset during music enjoying, while music stop for phone
talking
and come back automatically once phone finish.

Ending call
Press the multifunction button briefly once call end
Transferring a call to the phone
Press and hold the multifunction more than 3 seconds during a call to transfer the call from
headset to the mobile phone, press and hold the same button again to transfer the call
back
to the headset.
Initiating a call with Voice dialing
You may be able to initiate the voice dialing function from your headset( your phone will
need
to support voice dialing and voice tags need to be entered). To activate, briefly press
the voice dialing Button, you will then be able to speak the name of the person you wish to
call. Press and hold same button more than 3 seconds for last number dial.
Multifunction button, Totally the button has below functions
Answering/Rejecting call
Transferring call
A2DP play/pause
Resetting Headset
If the headset stops responding, try charging it for a few minutes.
4. Interface for wired audio source
When the power of bluetooth headset uses up while it's not convenient to charge on time,
this device still
can be used as wired headphone with attached cable connecting to your
other audio devices.
Please note wired audio source is priorto wireless on this headset. Bluetooth will switch off
automatically once 3.5mm audio plug inserted. Please restart the headset if you want
Bluetooth working.
5. Troubleshooting
Problem: The headset will not turn on
Suggestion: The headset battery may be flat, Try recharging the headset
Problem: Pairing
is unsuccessful
Suggestion:
---Try moving the phone and headset closed together during pairing
---Make sure that the mobile phone is in the correct Bluetooth mode
---Some electrical devices such as microwave ovens create a noisy electrical environment
make it difficult for the headset
to communicate with the phone
---Try moving away from such devices and try again

Problem: Pairing has succeeded but calls are not heard in the headset
Suggestion: Make sure
that your phone is switched on and ready to connect to the headset.
Check your phone user manual on how
to do this
Problem: The headset stops responding to button presses
Suggestion:
--- Ensure headset battery is charged.
---Try resetting headset according to the directions given
in "Resetting headset"
6. Additional Information
Skulllcandy company information:
( contact person, email, website .... )
Warranty:
(need or not??)
Declaration of conformity
The device is compliance with the essential requirements and other relevant provisions of
directive 1999/5/EC
The device complies with part 15 of the FCC Rules.
Click Here To Read More...
Skullcandy Bluetoth Helmet BTG-363
User Manual