SKYDANCE T15 User manual

● Touch panel 4 zone 1-5 color DMX512 master, can also be used as 4 zone 1-5 color RF remote.
● Each zone can be set as single color, dual color(WW/CW), RGB, RGBW or RGB+CCT light type.
● DMX signal output, comply to standard DMX512 protocol, compatible with DMX decoder from any supplier.
● When used as RF remote, each zone can remote control multiple Skydance’s 2.4G LED controllers.
● Ultra sensitive high strength glass touch panel with touch color wheel in the middle and backlighting.
● Smooth and accurate color adjustment by touching the color wheel.
● Touch keys with chord tones and LED indicator.
Output signal DMX512, RF 2.4GHz
Input voltage 85-265VAC
Input current Max 0.1A
Operation temperature
Case temperature (Max.)
Environment
IP20
IP rating
Dimming data
Dimming range
Touch key + RF 2.4GHz
30m
256 levels
0 -100%
Technical Parameters
Input and Output
Safety and EMC
EMC standard (EMC) EN301 489,EN 62479
Radio Equipment(RED) EN300 328
Certification CE,EMC,LVD,RED
EN60950
Safety standard(LVD)
Warranty
5 years
Warranty
Input signal
RF Control distance
Dimming level
Ta: -30
O
C ~ +55
O
C
T c: +85
O
C
Model No.: T15
4 Zone/1-5 color in one/Glass touch panel/Color wheel/AC input/DMX 512 and RF 2.4G signal output
Features
Wall Mounted Touch Panel
LVD RED
User Manual Ver 1.0.2 Page 1
www.iskydance.com

SC EN E
S
ZO NE ZO NE Z O NE ZO N E
1234
SP EE D B RI GH TMO DE
M
CC T
RG B
Mechanical Structures and Installations
LNGN DD+ D -
DM X OUT P UT
IN PUT
85-265VAC
DMX output +
DMX output -
DMX signal GND
AC input L
AC input N
11.5mm
86mm
86mm
59mm
62mm
35mm
45.5mm
Typical base as below:
European style 86 size
Touch panel Baseplate Base
Uninstall
Installation diagram:
T15 Wall Mounted Touch Panel
Key function
Each zone can match single color, dual color(WW/CW), RGB, RGBW,
or RGB+CCT(WW/CW) controller or lamp.
Touch power key to turn on light, turn off light,
then immediately long press power key for 2 seconds,
enter zone light setting, Zone 1 indicator is on and Zone 1's light type is displayed:
MO DE
SP EED
BR IGH T
CC T
RG B
indicator is on: Zone1 is single color type.
indicator is on: Zone1 is dual color type.
indicator is on: Zone1 is RGB color type.
indicator is on: Zone1 is RGBW type.
indicator is on: Zone1 is RGB+CCT type.
If you want to change zone 1 light type, please long press above five key for 2 seconds,
For example, long press will set Zone 1 as RGB type.
RG B
If you want to change zone 2/3/4 light type, short press 2/3/4 zone key firstly, then repeat above step.
short press press power key or timeout 8s, quit zone light type setting.
Zone light type setting
User Manual Ver 1.0.2 Page 2
www.iskydance.com

Note:
● For single color, touch RGB/CCT wheel only change brightness, RGB, MODE, SPEED key is unvalid.
● For dual color, touch RGB/CCT wheel only change color temperature, RGB, MODE, SPEED key is unvalid.
● For RGB, when touch CCT wheel, adjust color temperature by mix R/G/B channel.
● For RGBW, when touch CCT wheel, adjust W channel brightness.
● After touch power key to turn off light, wait more than 3 seconds, long press power key for 5 seconds will turn on or turn off tone.
Turn on/off all zone light.
RGB color / Color temperature.
Press RGB or CCT key to switch between RGB wheel and CCT wheel.
Short press play 10 built-in mode, long press 2s run mode-cycle.
Short press turn on zone light and select zone simultaneously, long press 2s turn off zone light.
4 zone control seperately or synchronously, each zone could control multiple receivers.
Only multiple zone have same light type can select synchronously.
ZO NE ZON E Z ONE Z O NE
MO DE
SPEED
BR IGH T
SC ENE
For dynamic RGB mode, adjust speed, short press 10 levels, long press 2s get the default speed.
For static RGB color, adjust saturation, namely change current static RGB color to mixed white slowly,
short press 11 levels, long press 1-6s for continuous 256 levels adjustment.
Adjust brightness, short press 10 levels, long press 1-6s for continuous 256 levels adjustment.
Short press replay scene. Long press 2s to save the current color into the scene.
4 zone recall or save synchronously.
CC T
RGB color, 24 levels.
RG B
For dual color or RGB+CCT(WW/CW), adjust color temperature by WW/CW channel,
short press 11 levels, long press 2s get max or min color temperature.
For RGB, adjust color temperature by mix R/G/B channel,11 levels.
For RGBW, adjust color temperature by adjust W channel brightness,11 levels.
long press 2s get 100% or 0% White channel brightness.
Single color W W W W W
Zone 2
DMX address
Zone 3
DMX address
Zone 4
DMX address
Zone 1
DMX address
Light Type Light color channel
Dual color
RGB
RGBW
RGB+CCT
WW CW WW CW 0
R G B 0 0
R G B W W
1-5 6-10 11 -15 16 - 20
R G B WW CW
1-5 6-10 11 -15 16 - 20
1-5 6-10 11 -15 16 - 20
1-5 6-10 11 -15 16 - 20
1-5 6-10 11 -15 16 - 20
Touch Panel work as DMX512 Master
After connect with DMX decoders, please set the DMX decoders address as below:
T15 Wall Mounted Touch Panel
User Manual Ver 1.0.2 Page 3
www.iskydance.com

LN
IN PU T
85-265VAC
AC85-265V
GN D
D+ D -
DM X OU T PU T
DMX signal
Wiring Diagram for touch panel work as DMX512 master
Touch Panel work as RF remote (two match ways)
Use the controller’s Match key
Match:
Short press match key, immediately press Zone
key of the touch panel.
Use Power Restart
Match:
Switch off the power of the receiver, then switch on power again,
immediately short press Zone key 3 times on the touch panel.
The light blinks 3 times means match is successful.
.
Delete:
Switch off the power of the receiver, then switch on power again,
immediately short press Zone key 5 times on the touch panel.
The light blinks 5 times means all matched remotes were deleted.
Delete:
Press and hold match key for 5s to delete all match,
The light blinks 5 times means all matched remotes
were deleted.
End user can choose the suitable match/delete ways. Two options are offered for selection:
Wiring Diagram for touch panel work as RF remote
LN
IN PU T
85-265VAC
AC85-265V
GN D
D+ D -
DM X OU T PU T
T15 Wall Mounted Touch Panel
User Manual Ver 1.0.2 Page 4
www.iskydance.com