SKYDANCE T16 User manual

86 .0 0 mm
86 .0 0 mm
52 .0 0 mm
52 .0 0 mm
59 .0 0 mm
33.00 mm
11. 50 m m
T16T16-3
T16-2
T16-1
● Touch panel 1/2/3/4 zone dimming DMX512 master, can also be used as 4 zone dimming RF remote.
● DMX signal output, comply to standard DMX512 protocol, compatible with DMX decoder from any supplier.
● When used as RF remote, each zone can remote control multiple RF 2.4G LED controllers.
● Ultra sensitive high strength glass touch panel.
● Touch keys with LED indicator.
● White & Black glass panel available.
Output signal DMX512, RF 2.4GHz
Input voltage 100-240VAC
Input current Max 0.1A
User Manual Ver 2.0.1
Operation temperature
Case temperature (Max.)
Environment
IP20
IP rating
Dimming data
Dimming range
Touch key + RF 2.4GHz
30m
256 levels
0 -100%
Technical Parameters
Input and Output
Safety and EMC
EMC standard (EMC) EN301 489,EN 62479
Radio Equipment(RED) EN300 328
Certification CE,EMC,LVD,RED
EN60950
Safety standard(LVD)
Warranty
5 years
Warranty
Input signal
RF Control distance
Dimming level
Ta: -30
O
C ~ +55
O
C
T c: +65
O
C
Model No.: T16,T16-1,T16-2,T16-3
1-4 Zone dimming switch/Glass touch panel/AC input/DMX 512 and RF 2.4G signal output
Features
Page 1
Mechanical Structures and Installations
Wall Mounted Touch Panel
LVD RED
ON key
Short press: Turn on the light of each zone.
Long press(1-6s): Dimming up when light is on.
OFF key
Short press: Turn off the light of each zone.
Long press(1-6s): Dimming down when light is on.
T16 / T16-1
T16-2 / T16-3
Zone1
Zone1
Zone2
Zone1
Zone2
Zone3
Zone1
Zone2
Zone3
Zone4
T16T16-3T16-2
T16-1
Control zone number
Output DMX channel number
Model No. T16T16-3T16-2T16-1
1234
1234
Typical base as below:
European style 86 size
Installation diagram:
Key function
Weight
0.180kg
Gross weight
Net weight
0.237kg
LN
INP UT 100- 240VA C
GND D +D-
DMX O UTPUT
D+D - DMX output +
DMX output -
DMX signal GND
AC input L
AC input N
DMX output -
DMX output +
Baseplate Base
Uninstall Touch panel
Turn on key tone: Long press OFF key 5s when zone light is off, will turn on or turn off key tone.
www.iskydance.pl

Wiring Diagram for touch panel work as RF remote
Touch Panel work as RF remote
Use the controller’s Match key
Match:
Short press match key, immediately press ON
key of the touch panel.
The LED indicator fast flash a few times
means match is successful.
Use Power Restart
Match:
Switch off the power of the receiver, then switch on power again,
immediately short press ON key 3 times on the touch panel.
The light blinks 3 times means match is successful.
.
Delete:
Switch off the power of the receiver, then switch on power again,
immediately short press ON key 5 times on the touch panel.
The light blinks 5 times means all matched remotes were deleted.
Delete:
Press and hold match key for 5s to delete all match,
The LED indicator fast flash a few times
means all matched remotes were deleted.
When the touch panel work as RF remote, it need match with other RF 2.4G LED controllers.
End user can choose the suitable match/delete ways. Two options are offered for selection:
User Manual Ver 2.0.1 Page 2
Wiring Diagram for touch panel work as DMX512 master
T16 / T16-1
T16-2 / T16-3
After connect with DMX decoders, please set the DMX decoders address as below:
DMX decoder’s address 001 is controlled by Zone 1,
DMX decoder’s address 002 is controlled by Zone 2,
DMX decoder’s address 003 is controlled by Zone 3,
DMX decoder’s address 004 is controlled by Zone 4.
Touch Panel work as DMX512 Master
D4-L
DMX512 & RDM Decoder
D+D- D-D+
AC100-240V
Power Supply
12-24VDC
Constant Voltage
DMX signal
CW CW
AC100-240V
LN
INPU T 100-2 40VAC
GND D+D-
DMX OU TPUT
D+D-
+
Single color LED strip
+
Single color LED strip
+
Single color LED strip
+
Single color LED strip
AC100-240V
LN
INPU T 100-2 40VAC
GND D+D-
DMX OU TPUT
D+D-
T16 / T16-1
T16-2 / T16-3
www.iskydance.pl