CAUTION! Wear appropriate PPE when working with chemicals. Backow prevenon required.
Venturi Sanitize Rinse Foam
Quick Start Guide
M2448 - SLX-MS3-VS-RN-VF Quick Start Guide
Last Updated: 04/12/2022
A. Take hold of spray wand for the system
B. Open discharge ball valve
C. Open water supply valve - unit will spray
D. Verify water pressure is at least 35 PSI
E. [Foamers] Open air supply valve - unit will foam
F. [Foamers] Adjust air pressure to alter foam quality
G. Foam equipment, from boom to top, and rinse
before it dries
H. Rinse from top to boom
I. When complete, turn o supply valves
J. Store rinsed hose depressurized, with discharge
valve open, and coiled properly to prevent kinks
3Operaon
WATER SUPPLY (35 - 125psi)
3/4" NPT CONNECTION
AIR SUPPLY (1/4" NPT)
AIR PRESSURE
GAUGE
AIR
REGULATOR
AIR SUPPLY
BALL VALVE
FOAMER SUPPLY
BALL VALVE
RINSE SUPPLY
BALL VALVE
FOAMER WATER
PRESSURE GAUGE
DOOR LOCK
FOAMER SOLUTION LINE
WITH STRAINER &
CERAMIC WEIGHT
FOAMER
RINSE
STATION
FOAMER DISCHARGE HOSE
RINSE
DISCHARGE
HOSE
FOAMER
DISCHARGE
BALL VALVE
RINSE DISCHARGE
BALL VALVE
FOAMER
CHEMICAL
INLET
SANITIZER
DISCHARGE
BALL VALVE
SANITIZER DISCHARGE HOSE (RED)
SANITIZER SOLUTION LINE WITH
STRAINER & CERAMIC WEIGHT
SANITIZER
SANITIZER CHEMICAL INLET
SANITIZER WATER PRESSURE GAUGE
SANITIZER SUPPLY BALL VALVE
Example Installaon
A. Select a metering p for desired diluon rao
B. Install the metering ps by screwing it onto the hose
barbs for each chemical inlet
C. Install chemical sucon lines to hose barbs
D. Connect sucon lines to chemical soluon
2Diluon
Metering Tip Calculator
Mobile App:
A. Mount SLX
enclosure to wall
B. Flush supply lines
C. Install backow
prevenon per
local guidelines
D. Connect supply
lines:
• Compressed air
(1/4” NPT)
• Water (3/4”
NPT)
E. Connect discharge
hoses
F. Place chemical
containers below
unit
1Install &
Connect
