SMA SUNNY BOY STORAGE 2.5 Manual

SBS25-1VL-10-Batterys-TI-en-13 | Version 1.3ENGLISH
Technical information
SUNNY BOY STORAGE 2.5
Approved batteries and battery communication
connection

Table of Contents SMA Solar Technology AG
Technical informationSBS25-1VL-10-Batterys-TI-en-132
Table of Contents
1 Approved Batteries.................................................................. 3
2 Battery Communication Connection ....................................... 4

1 Approved Batteries
SMA Solar Technology AG
Technical information SBS25-1VL-10-Batterys-TI-en-13 3
1 Approved Batteries
This overview contains a list of lithium-ion batteries which are approved for the operation with the
SunnyBoyStorage2.5 (SBS2.5-1VL-10) of SMA Solar Technology AG (status: September /
2017):
Manufacturer Type Product number Compatible from
firmware version of the
SBS2.5-1VL-10
Tesla Energy Tesla Daily Power-
wall
1067000-00-C 2.02.01.R
LG Chem RESU10H R15563P3SDLT 2.04.14.R
BYD Company Limited B-BOX H* - 2.04.23.R
* Equipped with at least five to eight battery modules

2 Battery Communication Connection SMA Solar Technology AG
Technical informationSBS25-1VL-10-Batterys-TI-en-134
2 Battery Communication Connection
In this section, you will find the cabling plan for the battery communication connection between the
SunnyBoyStorage 2.5 and the approved batteries.
SunnyBoyStorage2.5 with LG Chem RESU10H
1
LG Chem RESU 10H
SUNNY BOY
STORAGE 2.5
6
5
4
3
2
AB C
D E F
Clamping posi-
tion
Assignment Clamping posi-
tion
Assignment
A ‒ 1 12V - AUX
B Enable 3 BAT EN
C GND and shielding 2 GND - AUX
D CAN L* 5 CAN - L
E CAN H* 4 CAN - H
* Twisted pair conductors, at least CAT3
SunnyBoyStorage2.5 with BYD B-BOX H
753
864
1
2
BYD B-BOX H
SUNNY BOY
STORAGE 2.5
AB C
D E F
Clamping posi-
tion
Assignment Clamping posi-
tion
Assignment
A Not assigned 1 13V +
B Enable 2 EN 11V +
C GND and shielding 4 EN 11V -

2 Battery Communication Connection
SMA Solar Technology AG
Technical information SBS25-1VL-10-Batterys-TI-en-13 5
Clamping posi-
tion
Assignment Clamping posi-
tion
Assignment
D CAN L* 8 CAN - L
E CAN H* 6 CAN - H
* Twisted pair conductors, at least CAT3

www.SMA-Solar.com