SMART-AVI FDX-M4P User manual

FDX‐M4P
(FDX‐M4U)
Quick Start Guide
800.AVI.2131
Tel: [phone] |Fax: [phone]
11651 Vanowen St. North Hollywood, CA 91605
SmartAVI.com
Designed and Manufactured in the USA
WHAT’S IN THE BOX
NOTICE
The information contained in this document is
subject to change without notice. SmartAVI
makes no warranty of any kind with regard to this
material, including but not limited to, implied
warranties of merchantability and fitness for
particular purpose.
SmartAVI will not be liable for errors contained
herein or for incidental or consequential
damages in connection with the furnishing,
performance or use of this material.
No part of this document may be photocopied,
reproduced, or translated into another language
without prior written consent from SmartAVI
Technologies, Inc.
20160901
Quad DVI-D, USB Keyboard,
USB Mouse, RS-232 and Audio
Extender
MULTIMODE FIBER OPTIC
4 PORT DVI-D EXTENDER
PART NO. QTY DESCRIPTION
FDX-TXM4P 1
Point to Point Quad DVI-D,
USB Keyboard & Mouse, Au-
dio and RS-232 Multimode
Fiber Extender Transmitter
FDX-RXM4P 1
Point to Point Quad DVI-D,
USB Keyboard & Mouse, Au-
dio and RS-232 Multimode
Fiber Extender Receiver
EN-SFX4P-EAR-P 4 Mounting Brackets
CCPWR06 2 Power supply cord
1 Quick Start Guide
TECHNICAL SPECIFICATIONS
VIDEO
Resolution Up to 1920 x 1200 @60Hz
Format DVI-D Single Link
Input Interface (4) DVI-D 29-pin female
Output Interface (4) DVI-D 29-pin female
Maximum Pixel
Clock 165 MHz
DDC Internal
Input Equalization Automatic
Input Cable
Length Up to 20 ft.
Output Cable
Length Up to 20 ft.
AUDIO
Signal Type Stereo Audio
Input Interface (1) 3.5 mm Stereo Audio Female
Output Interface (1) 3.5 mm Stereo Audio Female
USB
Signaling USB 2.0 or 1.1 (Keyboard and
Mouse ONLY)
Input Interface (1) USB Type B Female
Output Interface (2) USB Type A Female
OTHER
Fiber Extender
• 225m @ Multimode 62,5μ
• 450m @ Multimode 50μ
Fiber-Plug type LC
Power Internal 110-240 VAC
Dimensions 17" W x 5.75" D x 1.875" H
Weight FDX-
TXM4P 2.6 lbs
Weight FDX-
RXM4P 2.75 lbs.
Operating Temp. 32-131°F (0-55 °C)
Storage Temp. -4-185 °F (-20-85 °C)
Humidity Up to 95% No Condensation
RS-232 Data up to 115,200 bps, N,8,1, No
Flow Control

INTRODUCTION
The FDX-M4P consists of a transmitter and
receiver that extend four DVI-D outputs,
audio, USB keyboard, USB mouse and RS-
232. For exceptional quality and security,
fiber optic extension is the best solution. The
FDX-M4P can go the distance with multi-
mode fiber optic cabling that can reach up to
1,400 feet.
FEATURES
 Quad channel DVI-D, audio and USB
keyboard and mouse with RS-232 control
 Top Signal Quality over Multimode Fiber
(up to 1,400 feet)
 Video Resolutions up to 1920 x 1200
WUXGA at 60Hz
 Customizable/Programmable DDC Table
for Mac/PC
 Supports all USB 2.0 and 1.1 Keyboards
and Mice
 Fiber Plug Type LC
 Compatible With all Major KVM Switches
 Supports Mac, PC, and Linux DVI
 Uses universal DVI Single Link
connectors
 Zero pixel loss with TMDS signal
correction
 Rack Mountable Solution
 Plug-and-play
INSTALLATION DIAGRAM
HARDWARE INSTALLATION
1. Turn off the computer, displays, speakers and any peripheral devices.
2. Connect the USB cable, RS-232 cable and audio cable from the computer and to the FDX-
TXM4P.
3. Do not connect the DVI inputs from the computer to the FDX-TXM4P.
4. Connect the DVI displays to the DVI connectors on the FDX-RXM4P. (DVI monitors recom-
mended.)
5. Connect USB mouse and keyboard to the USB connectors on the FDX-RXM4P.
6. Connect speakers to the audio connector on the FDX-RXM4P.
7. Connect an RS-232 device to the FDX-RXM4P.
8. Connect the FDX-TXM4P to the FDX-RXM4P with multimode fiber-optic cables.
9. Power on the computer, displays, speakers and any peripheral devices.
10.Connect the power cords and power on the FDX-TXM4P and the FDX-RXM4P. The status
LEDs will flash. It will take up to 30 seconds for the FDX-M4P to learn the EDID settings from
the connected DVI displays. Once the EDID settings are learned the LEDs will stop flashing.
11. Connect the computer’s DVI inputs to the FDX-TXM4P.
WARNING: Be careful not to cross the Video Link Fiber Optic cables. Video Link 1 on the FDX-
TXM4P must be connected to Video Link 1 on the FDX-RXM4P. TX Video Link 2 must connect to
RX Video Link 2 , 3 to 3, etc.
Note: HDMI monitors with DVI to HDMI adapters may work with DVI EDID settings loaded.
FRONT
REAR