SMART-AVI DPX-1P-Plus User manual

DPX-1P-Plus
DisplayPort, USB Keyboard and Mouse
Extender with RS232 and Audio
www.SmartAVI.com
What’s in the Box?
PART NO. QTY DESCRIPTION
DPX-1P-Plus-RX 1 DPX-1P-Plus Receiver. DisplayPort + USB +
RS-232 Receiver over CAT5/5e/6
DPX-1P-Plus-TX 1 DPX-1P-Plus Transmitter. DisplayPort + USB
+ RS-232 Transmitter over CAT5/5e/6
Power Supply 2 PS5VDC4A
OPTIONAL QTY DESCRIPTION
SM-Rack 1 Universal Half Rack Shelf System. Includes:
[SmartRack Shelf, 2 Slotted Mounting
Brackets and Hardware.]
CCDPMMKVM-06 1 6 ft KVM USB DisplayPort Cable
© Copyright 2018 SmartAVI, All Rights Reserved
NOTICE
The information contained in this document is subject to
change without notice. SmartAVI makes no warranty of any
kind with regard to this material, including but not limited
to, implied warranties of merchantability and tness for any
particular purpose.
SmartAVI will not be liable for errors contained herein or for
incidental or consequential damages in connection with the
furnishing, performance or use of this material.
No part of this document may be photocopied, reproduced
or translated into another language without prior written
consent from SmartAVI.
For more information, visit www.smartavi.com.
SmartAVI, Inc.
11651 Vanowen St. North Hollywood, CA 91605
Tel: [phone] Fax: [phone]
www.SmartAVI.com
Extend DP Video, USB Keyboard and
Mouse, Audio, and RS232 up to
328 feet (100m) over CAT5/5e/6 cable
Rack Mountable Option
Our SmartRack is the perfect solution to allow
virtually all SmartAVI devices to be custom mounted
in a standard 19” server rack. The SmartRack is fully
adjustable and can secure/organize several devices.
Technical Specications
VIDEO
Format DisplayPort 1.2
Maximum Pixel Clock 275 MHz
Input Interface (TX) (1) DP female
Output Interface (RX) (1) DP female
Resolution Up to 4K (3840x2160 @ 30Hz)
DDC via AUX
Input Equalization Automatic
Input Cable Length Up to 15 ft.
Output Cable Length Up to 15 ft.
OTHER
Power External 100-240 VAC/5VDC4A @20W
Dimensions 9 in W x 2 in H x 3 in D
Weight 1.45 lb per TX/RX unit
Operating Temp. 0-55 °C (32-131°F)
Storage Temp. -20-85 °C (-4-185 °F)
Humidity Up to 95%
USB
Signal Type USB 1.1 and USB 2.0 Compatible
Input Interface (TX) (1) USB Type B (Female)
Output Interface (RX) (2) USB Type A (Female)
AUDIO
Frequency Response 30KHz to 80KHz
Input Interface (TX) (1) 3.5 mm (Female)
Output Interface (RX) (1) 3.5 mm (Female)
RS-232
Input Interface (TX) DB9 (Female)
Output Interface (RX) DB9 (Female)
Flow Control Software up to 115,000 kbps
Quick Start Guide

Introduction
The DPX-1P-Plus DisplayPort extender is capable
of sending a DP signal up to 328 feet (100m) over
a conventional and inexpensive CAT5/5e/6 cable.
The technology is superior to standard extenders that
require a special CAT6 shielded cable to go a short
distance. The DPX-1P-Plus also has USB keyboard and
mouse, and RS-232 extension, giving users the ability to
control displays or devices remotely.
Features
• Extend DisplayPort signals up to 328 feet (100m)
• Data recovery for digital video
• Supports 1080p (1920x1200 @ 60Hz)
• Supports up to 4K (3840x2160 @ 30Hz) video
resolution
• Automatic EDID Learning via AUX
• USB Keyboard and Mouse
• Supports RS-232 extension
• External power adapter for transmitter and
receiver unit
• Supports SST only (no MST support)
• Plug-and-play ready
Applications
• Digital Signage
• Security
• PC Networking
• Conference Center Systems
• Point of Sale
• Camera Surveillance
• Video Phone
• Control Room Systems
• Recording Studio
• PC KVM Extension
Diagram
Connecting the DPX-1P-Plus
1. Power o all devices.
2. Connect a DisplayPort source (computer) to the
DisplayPort port on the DPX-1P-Plus-TX.
3. Connect a USB source (computer) to the USB port
on the DPX-1P-Plus-TX using a USB A to B cable
(not included).
4. Optionally connect RS-232 for control functions.
5. Connect the DPX-1P-Plus-TX to the the DPX-1P-
Plus-RX with one CAT5 UTP (Unsheilded Twisted
Pair) cable.
6. Connect a DisplayPort compatible display to the
DisplayPort port on the rear of the DPX-1P-Plus-RX.
7. Connect USB keyboard and mouse to the USB ports
on the DPX-1P-Plus-RX.
8. Optionally connect RS-232 for control functions.
9. Connect the power to the DPX-1P-Plus-RX and the
DPX-1P-Plus-TX.
10.Power on the display and then the computer.
The DDC of your display will be learned automatically.
The following is the wiring standard for terminating UTP/STP
cable using RJ-45 connector:
Connectors: RJ-45
Capacitance: 14 pf/ft (46.2 pf/m)
Conductor Gauge: 24 AWG
Impedance: 100 +/- 15 ohms
Pair 1 Pins 1 & 2
Pair 2 Pins 3 & 6
Pair 3 Pins 4 & 5
Pair 4 Pins 7 & 8
DPX-1P-TX Front
DPX-1P-RX Front
DPX-1P-TX Rear
DPX-1P-RX Rear
To reach maximum distances it is recommended to
use the best possible quality cable available. CAT5e/6
shielded cabling is ideal for best performance.
DPX-1P-Plus
DP IN
USB IN
AUDIO IN
CAT5/6
DP OUT
USB OUT
AUDIO OUT
RS232 IN RS232 OUT
DPX-1P-Plus TX DPX-1P-Plus RX
PC
RS232 IN
RS232 OUT
DP IN
USB IN
AUDIO IN USB OUT
DP OUT
Printer Monitor
Keyboard Mouse
CAT5/6
Speakers
AUDIO OUT