SMART-AVI D2H-4P Duo User manual

D2H‐4PDuo
Quick Start Guide
800.AVI.2131
Tel: [phone] |Fax: [phone]
11651 Vanowen St. North Hollywood, CA 91605
SmartAVI.com
Designed and Manufactured in the USA
NOTICE
The information contained in this document is
subject to change without notice. SmartAVI makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties of
merchantability and fitness for particular purpose.
SmartAVI will not be liable for errors contained
herein or for incidental or consequential damages
in connection with the furnishing, performance or
use of this material.
No part of this document may be photocopied,
reproduced, or translated into another language
without prior written consent from SmartAVI
Technologies, Inc.
20170118 Manage 4 computers with dual head,
screen displays from a single workstation
8-Port DisplayPort in, 2-Port HDMI out,
4K Ultra-HD KVM Switch
with USB and Audio
WHAT'S IN THE BOX?
PART NO. QTY DESCRIPTION
D2H-4P-Duo 1
4-Port Duo DisplayPort KVM
Switch with Audio and USB
2.0 Sharing
PS5VD4A 1 Power Adapter External 100
-240 VAC/5VDC4A
1 Quick Start Guide
TECHNICAL SPECIFICATIONS
VIDEO
Link Rate 5.4 Gbps
Input Interface (8) DisplayPort (female) Version
1.2
Output Interface (2) HDMI (female) Version 1.4
Resolution Up to 4K (3840x2160 @ 30Hz)
Input Equalization Automatic
Video Bandwidth Single-link 340MHz [10.2Gbps]
HDCP Compliant Yes
Input/Output Max
Cable Length 40 ft. (Cable Quality Dependant)
AUDIO
Input Interface (4) 3.5 mm Stereo Audio
Output Interface (1) 3.5 mm Stereo Audio
Impedance 600 Ohm
Frequency Re-
sponse 20Hz ~ 20KHz
Nominal Level 0-1.0 V
Common Mode Rejection at 60 dB
CONTROL
Front Panel Buttons
RS-232 DB9 Female - 9600 N,8,1, No flow
control
Hot Keys Via Keyboard, Select/Switch be-
tween Video & Audio sources
Emulation Keyboard, Video and Mouse
USB
Signal Type USB 2.0, 1.1, and 1.0 w/ internal
hub
Input Interface (4) USB Type B (female)
Output Interface
(2) USB 1.1 Type A for keyboard
and mouse;
(2) USB 2.0 Type A Transparent
OTHER
Power Adapter External 100-240 VAC/ 5VDC4A
Dimensions 3” H x 5.75” D x 12.75” W
Weight 4.3 lbs.
Operating Temp. +23 to +95°F (-5 to +35°C)
Operating Humidity 5 to 90% (No Condensation)
Storage Temp. -4 to 185°F (-20-85°C)
Brackets for mounting this device in a standard 19”
rack may be optionally ordered from Smart-AVI.

HARDWARE INSTALLATION
1. Ensure that power is disconnected from D2H-4P Duo.
2. Connect the DisplayPort cables, Audio and USB cables (male type-A to male type-B ) from the computers to the
respective ports on the D2H-4P Duo.
3. Optionally connect RS-232 for control functions.
4. Connect the USB keyboard and mouse to the two USB ports on the right .
Note: The 2 USB ports on the right are dedicated for keyboard and mouse with full emulation. The 2 on the left
are for other USB peripherals (flash drives, printers, etc.)
5. Connect speakers to the out connector on the D2H-4P Duo.
6. Connect the HDMI Displays to the OUT connector on the D2H-4P Duo.
7. Power on the displays, Computers and other devices. Power on the D2H-4P Duo.
COMMANDS HOTKEYS RS-232 CONTROL
Switch all devices (KVM, USB 2.0, and Audio) [CTRL] [CTRL] m [port #] [ENTER] //m [port #] [ENTER]
Switch KVM only [CTRL] [CTRL] c [port #] [ENTER] //c [port #] [ENTER]
Switch USB 2.0 only [CTRL] [CTRL] u [port #] [ENTER] //u [port #] [ENTER]
EDID Learning [CTRL] [CTRL] e [ENTER] //e [ENTER]
Same as front panel ◄M1 button [CTRL] [CTRL] ↑n/a
Same as front panel M2 ►button [CTRL] [CTRL] ↓n/a
Reset [CTRL] [CTRL] r //r
Factory Default Reset [CTRL] [CTRL] f //f
Switch Audio only [CTRL] [CTRL] a [port #] [ENTER] //a [port #] [ENTER]
OVERVIEW
D2H-4P Duo is a dedicated multi-platform KVM switch
capable of managing four 4K computers through a
single, central workstation. Built with ultra-HD ready
HDMI outputs, the D2H-4P Duo offers full video emu-
lation directly from the device. Up until now, Display-
Port switches lost emulated picture when discon-
nected from monitors, leading to confusion and disor-
ganization upon reconnecting. With the D2H-4P Duo,
full EDID-assisted HDMI video emulation ensures vis-
ual workspaces and screen resolutions are remem-
bered every time. The D2H-4P Duo is DisplayPort 1.2
and HDMI compliant, supporting screen resolutions
up to 4K Ultra-HD (3840x2160 @ 30Hz) for remark-
able and responsive video emulation. Additionally, the
D2H-4P Duo is USB peripheral-friendly. The D2H-4P
Duo is also easy to control with both a simple front-
panel interface, as well as RS-232 functionality.
FEATURES
 Full EDID video emulation via HDMI outputs for
dual screen displays
 KVM control between four connected computers
from a single workstation
 Supports resolutions up to 4K (3840x2160
@30Hz)
 DisplayPort 1.2 and HDMI compliant
 Zero pixel loss with TMDS signal correction
 Supports all USB 2.0 devices, including keyboard
and mouse
FRONT PANEL CONTROL
To switch ports using the front panel, press the M1 or
M2 button to navigate between connected com-
puters. EDID learning is also done through the front
panel buttons by pressing both buttons simultane-
ously.