SmarTrike 630 User manual

630
LOOK US UP ON YOUTUBE:
www.youtube.com/user/SmartTrikeOcial
www.smarTrike.com
-1-
20010008620
A B
20010004620
C
20010010680
K L M
20010009680
J
20010011620 20010012640
20010006680
D
20010001680(X2)
20010002680(X3)
B1
B2 B3
1
2 2001000163020010015680(X2)
ONP
20010016680
Q
I1
20010011640
USA: 1-855-SMTRKUS
(1-855-768-7587)
UK: 0845 5046410
9:30am – 5:00pm Monday to Friday
Not Bank Holidays or weekends.
You can also email us: [email protected]
for assistance and advice.
Thank you for buying smarTrike,
If you have any assembly issues or are missing
a part, please call us for assistance. Our
smarTrike® assembly experts will assist you.
DO NOT RETURN TO THE STORE
If you are experiencing problems with this
product, please call our HELP LINE.
20010007620 20010014680 200100113620
E
20010005620 20010014620
G H IF

BAP
1a
1b
1c
2
1
-2-
Step 1 Parts needed to complete this section
Pull out plastic tabs from
each rear wheel (B1) until
the wheel cover opens.
Take out white plugs+
screws (B3).
Place the washer (P)
on the axle (as shown)
Connect each back
wheel (B) to back axle.
X2
B1 B2
B3
H1

O
B
B3
B1
X2 X2
CLICK!
CLICK!
CLICK!
2a
2b
2c
-3-
Step 2 Parts needed to complete this section
By using the Phillips
screwdriver (O),
screw part A3 into
part B. Firmly
tighten clockwise.
Firmly insert white
plug (B3) into axle
opening, as shown.
Align spring lock
with dropout hole in
axle and push
firmly into position,
until piece "clicks"
into place.
Re-attach wheel
cover by aligning
small cover
protrusions with
small wheel rim
holes, "click" into
place all 3
positions until the
hub is firmly
secure.

-4-
the hole (as shown)
-
b
3b
3a
Step 3 Parts needed to complete this section
Insert part E into part A all
the way through the hole
(as shown)
Insert part D into part
C all the way through
the hole (as shown)
EC D

-5-
Push the apple rmly down to
insert, slightly turn until you
-
a
4a
CLICK!
ly down to
insert, slightl you
" k r
- b 4b
Step 4 Parts needed to complete this section
Push the apple firmly down to insert,
slightly turn until you hear a "click".
Make sure connector is not visible.
Insert the wheel all the way
through the body of the trike until
the bolt meets the retaining head.
CLICK!

Step 5 Parts needed to complete this section
O
5a 5b
I1F
Take the seat (F), push the screw through the
seat hole & the seat belt (I1).
Screw into the most rear facing hole and
firmly tighten with Allen key (O).
By using the "Allen" key (O), remove
screw by turning counter clockwise.
-6-

-7-
Step 6 Parts needed to complete this section
6a
6b
CLICK!
With little force, push safety bar
(H) into the apple's holes until you
hear a "click".
CLICK!
1
2
Place safety bar (H) holes into
protrusions located at the back of
the seat.
Align part (G) into the designated
holes in the center of the handlebar
and push down firmly until it "clicks".
CLICK!
H
G

I
6a
-8-
Step 7 Parts needed to complete this section
7c
WARNING: It may be dangerous to leave your child
unattended. Use a safety belt as soon as your child can sit
unaided. This seat is not suitable for children under 10 months.
Any load attached to the handle aects the stability of the
product. This product is not suitable for running or skating.
7a 7b
Ensure headrest attached
correctly.
Connect headrest (I) into designated slots
on safety bar, until you hear a "click".
Make sure safety belt (I1) is placed correctly
on top and seat cover is assembled properly.