SmarTrike Breeze 605 User manual

USA: 1-855-SMTRIKE
(1-855-768-7453)
Watch a live assembly !
Scan this code to view
a step-by-step visual guide, and
assemble your product easily.
Thank you for buying smarTrike.
If you have any assembly questions,
please contact us at any time.
[email protected]
USA:1-855-SMTRIKE
(1-855-768-7453)
Ⓡ
®
www.smarTrike.com
Find us at @smarTrike
-1-

B
F
H
H
E
D
C
X2
GJ
SR T U V W
KL
QN
Spare/De rechange
X4 X2
O P
M
I
Breeze™605
A
-2-

-3-

CB O
BM
M
x2
N
N
M
P
1a
2a
3b 3c
3a
1b 1c
2
1
Click
Cliquez
Insert the wheel axel into the
trike’s body up to the marked center.
Attach part M to the
rear axel until it “clicks”.
-4-
Step 1-3
Parts needed to complete this section
Remove the bolt from the
trike’s body.
Fasten the bolt back in place.
x2
a
b
c
Click
Cliquez
Front
clockwise.
P
O
Firmly screw in O with P .
Align and insert O in the dropout hole
of rear tube. Push until it "clicks" in.
A

4a 4b
4d4c
ON
-5-
Step 4
Parts needed to complete this section
x4
Firmly screw in O with P .
a
b
c d
P
O
x2
B O
x2
NF
Use V to release 4 screw .
V
V
F
Make sure not to
lose the screws
Repeat on the other side

x4
G
Use V to screw in
Flip the handlebar to screw in 4 screw.
4 screw (clockwise).
The screws must be screwed in the order a, b, c, d
5a 5b 5c
5d
6a 6b
FE
E
D
D
Step 5-6
Parts needed to complete this section
P
V
V
Make sure the arrow sticker direction
on the handlebar.
a
Remove the bolt from
the handlebar stem.
Use the bolt to attach the
handlebar.
Use the bolt to attach the
handlebar.
P
F
V
a
c
b
d
-6-
Lock the screw with P (clockwise).
P
x4
Make sure not to
lose the screws

r.
Insert part “
Put the screw on
the slot of the
connector.
G
Insert the steering wheel to the
trike body.
With the red button on the right
side of the trike, insert the wheel
into the body of the trike.
7a
7b
-7-
Step 7
Parts needed to complete this section
G
Scan this code
to Watch a live guide
Front

insert, slightly turn until you
insert,
Cover the connector.
H
Click
Cliquez
Turn the apple to face you.
Push the apple until
you hear a "click" sound.
Align part H into the designated
holes in the center of the handlebar
and push down firmly until it "clicks".
Cli
Click
8a
8b
8a
a
-
2
Click
Cliquez
Click
Cliquez
7a 7b
8
a. Release the safety belt holder screw
b. and thread the screws through the belt and belt holder
Insert and turn the pedals “V” into the fork until they click.
while still in parent mode.
a
b
Repeat on the other side
V
-8-
Click
Cliquez
Step 8
Parts needed to complete this section
H

a
-
2
9a 9b
8
Insert and turn the pedals “V” into the fork until they click.
while still in parent mode.
-7-
V
a
b
-9-
W
Click
Cliquez
W
Step 9-10
Parts needed to complete this section
W
Insert and turn the pedals W into the fork until they click.
while still in parent mode.
Click
Cliquez
Scan this code
to Watch a live guide
15m+ 15m+
24m+ 24m+
10
a. Push the button to release the plastic cap.
b. Pull out the plastic cap. Repeat on the other side

-10-
H
Click
Cliquez
Click
Cliquez
Use P to unscrew the back
screw (counter clockwise). Place and click I on rear
axle.
Push the apple until
you hear a "click" sound.
1
11b
11a
11c
2
P
Use P to secure the basket
(clockwise).
insert, slightly turn until you
insert,
Cov er the connector
.
9b
2
1
3a
9a
-8-
H
PI
Click
Cliquez
Click
Cliquez
Click
Cliquez
Use “P” to unscrew the back
screw (counter clockwise). Place and click “I” on rear
axle.
Turn the apple to face you.
Push the apple until
you hear a "click" sound. Align part “H” into the designated
holes in the center of the handlebar
and push down firmly until it "clicks".
Cli
Click
Cliquez
8a
H I P
I
Step 11
Parts needed to complete this section
IP
P

12b
Take the seat J , push the screw
through the seat hole.
Screw into the most rear
facing hole and firmly tighten
with Allen key P .
P
13
12c
12a
Click
Cliqu
ez
b
L
J
JLK
K
Click
Cliquez
Step 12-13
Parts needed to complete this section
a. Insert K behind the apple until it “clicks”.
b. Please K on the seat’s back
protrusion and push to “click”.
Unscrew the seat's screw.
-11-
P
Insert part L into the
safety bar,until
y
ou hear a "click".
P
15m+ 24m+
15m+ 24m+
15m+
24m+
a
Click
Cliquez

Step 14-15
Parts needed to complete this section
-12-
3a
14b
By using the "Allen" key (L), remove
screw by turning counter clockwise.
b
a
2b
Pull out the securing pin with
its securing lock.
b
c
c
WARNING: Ensure safety
pin is inserted correctly
and secured.
a. Insert T into the (retaining hole)
on the back of trike.
b. Insert the pin with the safety lock.
c. Turn the pin until you hear a
"click".
a
SR T
Click
Clicks
T
V
V
14a
15a 15b 15c
Front

Step 16-17
Parts needed to complete this section
17a 17b
1
2
Pull down the the footrest. Pull down the sides of the footrest.
-13-
WARNING: Nut must be inserted
correctly and secured.
Keep the nut in place ,
remove the screw from
by turning
,
counterclockwise.
Use V to screw the nut ,
clockwise.
16c
16b
Insert S into part T .
Align the hole of part S with
the corresponding hole in
part T .
J
16a
part T
V

Usage/Utilisation
15
Months+
15M+ 24M+
1
2
180
To activate child control mode,
1 press the red parent control button.
2and turn the front wheel 180.
-14-
Scan this code
to watch a live guide
.
.

Child Control 24 Months+
-
2b
2a
For the 24 Months+ stage,
fold up left and right footrests.
Push the release button to
place it back into frame.
1
1
2
2
L
a
1
-
b
a
c
b
3
Pull open the secured safety pin and pull it out. Once free, pull the parent handle up
Then remove it completely .
a
c
b
-15-
a Release the safety bar K by pressing the circles on the back of the seat.
b and pulling it away from the handlebar stem.
.
.

J
-
4b4a
Step 2: Secure the screw
at the second hole.
-
5 6
a
b
U
UP
Attach the seat by threading the bolt through the safety belt
and the front hole on the trike’s body.
Release the bolt to remove the chair.
Release the safety belt holder screw a and thread
the screws through the belt and belt holder b .
-16-
P
P
P
WARNING: It may be
dangerous to leave your child
unattended. Use a safety belt as
soon as your child can sit unaided.
This seat is not suitable for children
under 15 months. Any load attached
the product. This product is not
suitable for running or skating.
15m+ 24m+
15m+ 24m+
y

Click
Cliquez
1
180
2
7
a
b
c
d
Child Control 24 Months+
-17-
At 24 months, press the parent control button a and turn the wheel 180 b .
Twist and press the pedals inward c while making sure they fit into
the depression in the fork. d
Without disengaging the lock,
Feet may be injured!
Scan this code
to watch a live guide
15m+ 15m+
24m+ 24m+

-18-

-19-
www.smarTrike.com

60528308603
®
-20-