Smc networks Zse30a series User manual

2-Colour Display

High-Precision Digital Pressure Switch

The settings of the master sensor can be copied to the slave sensors.

 Reduced setting efforts  Reduced chance of set-value input error

Settings can be copied to up to 10 slave sensors at once.Settings can be copied to up to 10 slave sensors at once.

3-step setting

PushPush

End setting

PushPush

Adjust to set-value

with buttons.

Added vacuum range.

 Rated pressure range: 0.0 to –101.0 kPa

2 added outputs:

 NPN or PNP open collector 2 outputs

 NPN or PNP open collector 1 output + analogue output

(1 to 5 V or 4 to 20 mA)

–101 kPa

Master Unit 1Slave →Unit 2 Unit 10

Copy

Expanded pressure range

for positive pressure type

to the vacuum range:

 Rated pressure range: –0.1 to 1.0 MPa

1 MPa

–0.1 MPa

(–100 kPa)

RoHS compliant

CAT.EUS100-70A-UK

Series ZSE30A

(

)

/ISE30A

Withstand pressure

Minimum unit setting

Rated pressure range

 Secret code setting function

The key locking function keeps unauthorized users from

tampering with buttons.

 Power-saving function

Power consumption is reduced by turning off the monitor

(power consumption reduced by up to 20%.)

 Resolution-switch function

It reduces the monitor to flicker.

 MPa/kPa switch function

Vacuum, compound and/or positive pressure can be

displayed both in MPa or kPa.

Bracket configuration allows mounting in four positions.

The clip type allows easy removal of fittings.

Fitting’s type and size can be changed.

Series

–0.100

1.000 MPa

1 MPa

–0.1 MPa

(–100 kPa)

ISE30A (positive)

0.0

–101.0 kPa

–101 kPa

ZSE30A (vacuum)

–100.0 to 100.0 kPa

–100 kPa

100 kPa

ZSE30AF

(compound)

0.001 MPa0.1 kPa

500 kPa

0.1 kPa

NPN or PNP open collector 1 output

NPN or PNP open collector 2 outputs

NPN or PNP open collector 1 output + Analog output (voltage or current)

Output

R1/8, NPT1/8 (M5 female threaded)

ø4, ø6, ø5/32, ø1/4 one-touch fittings

Piping

Set pressure range

–0.105

1.050 MPa

–105.0

105.0 kPa

10.0

–105.0 kPa

Mounting

example

Mounting

example

Bracket A Bracket B

Panel mount

Mountable side by side without clearance

One opening!

• Reduction of panel-cut job

• Space saving

Replaceable one-touch fittings

Connector cover added.

4-digit display allows easy reading of displayed values.

Example: 0.5 MPa

Lead wire

4-digit display

Additional functions

One-touch fitting

Clip

Lead wire with connector

(2 m)

Connector cover

Mounting

Series

1.5 MPa

Possible to check set-value during

key locking

Series 30A

(New)

(Accuracy does not changed, only displayed values.)

1/1000 1/100

Series 30

(Conventional)

How to Order

2-Colour Display High-Precision

Digital Pressure Switch

Series ZSE30A

(

)

/ISE30A

For vacuum/

compound pressure

ISE30A

For positive

pressure

01 N M

ZSE30A 01 N M

Rated pressure range

ISE30A –0.1 to 1 MPa

Output

NPN open collector 1 output

PNP open collector 1 output

NPN open collector 2 outputs

PNP open collector 2 outputs

NPN open collector 1 output +

Analogue voltage output

NPN open collector 1 output +

Analogue current output

PNP open collector 1 output +

Analogue voltage output

PNP open collector 1 output +

Analogue current output

C Note)

D Note)

E Note)

F Note)

Rated pressure range

ZSE30A

ZSE30AF

0 to –101 kPa

–100 to 100 kPa

Option 1

Without lead wire

Lead wire with connector

(Lead wire length 2 m) Note)

Lead wire with connector

(lead wire length 2 m) Note)

and with connector cover

—

Note) For output types N and P, the number of core of lead wires will

be 3, and for other types, it will be 4.

Option 3

Symbol

Calibration

certificate

—

Operating manual

Booklet

CD-ROM



—



—



—



—



With unit display Note 2)

switching function

Fixed SI unit Note 3)

With unit display Note 2)

switching function

(Initial value PSI)

—

Display unit

Note 2) Under the New Measure-

ment Law, sales of switches

with the unit switching func-

tion have not been allowed

for use in Japan.

Note 3) Fixed unit kPa, MPa

Option 2

None

Bracket A

Bracket B

Panel mount adapter

Panel mount adapter + front protection cover

—

Piping

R1/8 (M5 female threaded)

NPT1/8 (M5 female threaded)

One-touch fitting ø4 mm, ø5/32 inch

One-touch fitting ø6 mm

One-touch fitting ø1/4 inch

One-touch fitting ø4 mm, ø5/32 inch

One-touch fitting ø6 mm

One-touch fitting ø1/4 inch

N01

C4H

C6H

N7H

C4L

C6L

N7L

Straight type

Elbow type

Note) Made to Order

Note 1) Made to Order

Note)

Note 1)

Connector cover

Features 1

Withstand pressure

Minimum unit setting

Rated pressure range

 Secret code setting function

The key locking function keeps unauthorized users from

tampering with buttons.

 Power-saving function

Power consumption is reduced by turning off the monitor

(power consumption reduced by up to 20%.)

 Resolution-switch function

It reduces the monitor to flicker.

 MPa/kPa switch function

Vacuum, compound and/or positive pressure can be

displayed both in MPa or kPa.

Bracket configuration allows mounting in four positions.

The clip type allows easy removal of fittings.

Fitting’s type and size can be changed.

Series

–0.100

1.000 MPa

1 MPa

–0.1 MPa

(–100 kPa)

ISE30A (positive)

0.0

–101.0 kPa

–101 kPa

ZSE30A (vacuum)

–100.0 to 100.0 kPa

–100 kPa

100 kPa

ZSE30AF

(compound)

0.001 MPa0.1 kPa

500 kPa

0.1 kPa

NPN or PNP open collector 1 output

NPN or PNP open collector 2 outputs

NPN or PNP open collector 1 output + Analog output (voltage or current)

Output

R1/8, NPT1/8 (M5 female threaded)

ø4, ø6, ø5/32, ø1/4 one-touch fittings

Piping

Set pressure range

–0.105

1.050 MPa

–105.0

105.0 kPa

10.0

–105.0 kPa

Mounting

example

Mounting

example

Bracket A Bracket B

Panel mount

Mountable side by side without clearance

One opening!

• Reduction of panel-cut job

• Space saving

Replaceable one-touch fittings

Connector cover added.

4-digit display allows easy reading of displayed values.

Example: 0.5 MPa

Lead wire

4-digit display

Additional functions

One-touch fitting

Clip

Lead wire with connector

(2 m)

Connector cover

Mounting

Series

1.5 MPa

Possible to check set-value during

key locking

Series 30A

(New)

(Accuracy does not changed, only displayed values.)

1/1000 1/100

Series 30

(Conventional)

How to Order

2-Colour Display High-Precision

Digital Pressure Switch

Series ZSE30A

(

)

/ISE30A

For vacuum/

compound pressure

ISE30A

For positive

pressure

01 N M

ZSE30A 01 N M

Rated pressure range

ISE30A –0.1 to 1 MPa

Output

NPN open collector 1 output

PNP open collector 1 output

NPN open collector 2 outputs

PNP open collector 2 outputs

NPN open collector 1 output +

Analogue voltage output

NPN open collector 1 output +

Analogue current output

PNP open collector 1 output +

Analogue voltage output

PNP open collector 1 output +

Analogue current output

C Note)

D Note)

E Note)

F Note)

Rated pressure range

ZSE30A

ZSE30AF

0 to –101 kPa

–100 to 100 kPa

Option 1

Without lead wire

Lead wire with connector

(Lead wire length 2 m) Note)

Lead wire with connector

(lead wire length 2 m) Note)

and with connector cover

—

Note) For output types N and P, the number of core of lead wires will

be 3, and for other types, it will be 4.

Option 3

Symbol

Calibration

certificate

—

Operating manual

Booklet

CD-ROM



—



—



—



—



With unit display Note 2)

switching function

Fixed SI unit Note 3)

With unit display Note 2)

switching function

(Initial value PSI)

—

Display unit

Note 2) Under the New Measure-

ment Law, sales of switches

with the unit switching func-

tion have not been allowed

for use in Japan.

Note 3) Fixed unit kPa, MPa

Option 2

None

Bracket A

Bracket B

Panel mount adapter

Panel mount adapter + front protection cover

—

Piping

R1/8 (M5 female threaded)

NPT1/8 (M5 female threaded)

One-touch fitting ø4 mm, ø5/32 inch

One-touch fitting ø6 mm

One-touch fitting ø1/4 inch

One-touch fitting ø4 mm, ø5/32 inch

One-touch fitting ø6 mm

One-touch fitting ø1/4 inch

N01

C4H

C6H

N7H

C4L

C6L

N7L

Straight type

Elbow type

Note) Made to Order

Note 1) Made to Order

Note)

Note 1)

Connector cover

Specifications

Piping Specifications

Model 01 N01 C4H C6H

Sensor pressure receiving area: Silicon

C3602 (electroless nickel plated)

O-ring: HNBR

N7H C4L C6L N7L

—

ø1/4 inch

—

ø6 mm

—

ø4 mm

ø5/32 inch

ø1/4 inch

—

ø6 mm

—

——————

ø4 mm

ø5/32 inch

—

NPT1/8

M5 x 0.8

—

R1/8

M5 x 0.8

— —

—

One-touch fitting, Straight type

One-touch fitting, Elbow type

Sensor pressure receiving area

Piping port

Including lead wire with connector (3 cores, 2 m)

Including lead wire with connector (4 cores, 2 m)

Excluding lead wire with connector

PBT, POM, Stainless steel 304, C3604 (electroless nickel plated)

O-ring: NBR

81 g

85 g

43 g

70 g

74 g

32 g

Port size

Wetted

parts

material

Weight

71 g

75 g

33 g

73 g

77 g

35 g

75 g

79 g

37 g

73 g

77 g

35 g

75 g

79 g

37 g

Optional Part No.

When optional parts are required separately, use the following part numbers to place an order.

ZS-38-A1

ZS-38-A2

ZS-27-C

ZS-27-D

ZS-27-01

ZS-38-3L

ZS-38-4L

ZS-38-3G

ZS-38-4G

Bracket A

Bracket B

Panel mount adapter

Panel mount adapter + front protection cover

Front protection cover

Lead wire with connector

Lead wire with connector (with connector cover)

Mounting screw (with 2 pcs. of M3 x 5L)

Mounting screw (with 2 pcs. of M3 x 8L)

3 cores, for 1 output, 2 m

4 cores, for 2 outputs, 2 m

3 cores, for 1 output, 2 m

4 cores, for 2 outputs, 2 m

Part no. Option Note

ZS-38-5L

ZS-38-U

ZS-38-C4H

ZS-38-C6H

ZS-38-N7H

ZS-38-C4L

ZS-38-C6L

ZS-38-N7L

ZS-38-H

Lead wire with a connector for copying

Lead wire unit with a connector for copying

One-touch fittings ø4 mm straight

One-touch fittings ø6 mm straight

One-touch fittings ø1/4 inch straight

One-touch fittings ø4 mm elbow

One-touch fittings ø6 mm elbow

One-touch fittings ø1/4 inch elbow

Operating manual CD-ROM

3 cores, copy function, 1 m

Copy function (up to 10 slaves)

O-ring, one-touch clip included

Part no. Option Note

Note 1) If applied pressure fluctuates near the set value, set the hysteresis above the fluctuation range to prevent chattering.

Note 2) When analogue the voltage output is selected, a simultaneous selection of switch output and current output is not available.

Note 3) When analogue the current output is selected, a simultaneous selection of switch output and voltage output is not available.

Model ZSE30A (Vacuum pressure)

Rated pressure range

Regulating pressure range

Proof pressure

Setting/display resolution

Applicable fluid

Power supply voltage

Current consumption

Switch output

Repeatability

Analogue

output

Hystere-

sis

Display

Display accuracy

Indicator light

Environ-

ment

resistance

Temperature characteristics

Lead wire

Standards

0.0 to –101.0 kPa

10.0 to –105.0 kPa

500 kPa

0.1 kPa

0.6 to 5 V ±2.5% F.S. or less (with rated pressure range)

ZSE30AF (Compound pressure)

–100.0 to 100.0 kPa

–105.0 to 105.0 kPa

500 kPa

0.1 kPa

Air, non-corrosive gas, non-flammable gas

12 to 24 VDC ±10%, Ripple (p-p) 10% or less (with power supply polarity protection)

40 mA or less

NPN or PNP open collector 1 output, NPN or PNP open collector 2 outputs (selectable)

80 mA

28 V (with NPN output)

1 V or less (with load current of 80 mA)

2.5 ms or less (with anti-chattering function: 20, 100, 500, 1000, 2000 ms)

With short circuit protection

±0.2% F.S. ±1 digit

±1% F.S. or less

Approx. 1 kΩ

±1% F.S. or less

4-digit, 7-segment, 2-colour LCD (Red and Green)

±2% F.S. ±1 digit (ambient temperature of 25 ±3°C)

Lights up when switch output is ON. OUT1: Green, OUT2: Red

IP40

Operating: 0 to 50°C, Stored: –10 to 60°C (no freezing or condensation)

Operating/Stored: 35 to 85% RH (no condensation)

1000 VAC for 1 minute between live parts and enclosure

50 MΩ or more between live parts and enclosure (at 500 VDC Mega)

10 to 150 Hz, 1.5 mm amplitude (or 20 m/s2 acceleration), in X, Y, Z directions, for 2 hours each (Non-energized)

100 m/s2 in X, Y, Z directions, 3 times each (non-energised)

±2% F.S. (based on 25°C)

CE Marking, UL/CSA, RoHS compliance

Variable (0 or above) Note 1)

ISE30A (Positive pressure)

–0.100 to 1.000 MPa

–0.105 to 1.050 MPa

1.5 MPa

0.001 MPa

Maximum load current

Maximum applied voltage

Residual voltage

Response time

Short circuit protection

Voltage

output

Hysteresis mode

Window comparator mode

Enclosure

Operating temperature range

Operating humidity range

Withstand voltage

Insulation resistance

Vibration resistance

Impact resistance

1 to 5V ±2.5% F.S. or less (with rated pressure range)

2.4 to 20 mA ±2.5% F.S. or less (with rated pressure range)

4 to 20 mA ±2.5% F.S. or less (with rated pressure range)

Output voltage

Linearity

Output impedance

Current

output

Output current

Linearity

Load impedance Maximum load impedance: 300 Ω with power supply voltage of 12 V; 600 Ω with power supply voltage of 24 V

Minimum load impedance: 50 Ω

Oilproof heavy-duty vinyl cable, 3 cores ø3.5, 2 m

4 cores Conductor area: 0.15 mm2 (AWG26), Insulator O.D.: 1.0 mm

Note 2)

Note 3)

Series ZSE30A

(

)

/ISE30A

Descriptions

Analogue Output

Output voltage Output current

0.6

Pressure

BA C

Analogue output [V]

2.4

Pressure

BA C

Analogue output [mA]

Functions (Refer to pages 10 and 11 for details.)

Copy function

Auto-preset function

Precision indicator setting function

Peak display function

Bottom display function

Key lock function (Security code

input can be selected)

Zero-out function

Anti-chattering function

Unit display switching function

Power-saving mode

kPa⇔MPa switch function

Display resolution-switch function

Copies the settings of the master sensor to the slave sensors.

Calculates and enters rough set values automatically from the actual operating conditions.

Evens out deviations in the displayed value.

Can retain the maximum pressure value displayed during measurement.

Can retain the minimum pressure value displayed during measurement.

The key board can be locked to prevent any incorrect function of the switch.

The pressure display can be set at zero when the pressure is open to the atmosphere.

Prevents possible malfunction due to sudden fluctuations in the primary pressure by adjusting the response time.

Can convert the display value.

Reduces power consumption.

Converts display resolution from the normal value of 1/1000 to 1/100.

It reduces the monitor to flicker.

Converts the unit between kPa and MPa.

Displays unit being used (only kPa and MPa).

Unit display

Lights up when switch output (OUT1) is turned ON.

OUT1 Output display (Green)

Use this button to select the mode or increase the

ON/OFF set value.

It is also used for switching to the peak display

mode.

UP button

Use this button to switch the mode and set the set

value.

S SET button

Use this button to select the mode or decrease the

ON/OFF set value.

It is also used for switching to the bottom value

display mode.

DOWN button

Lights up when switch output (OUT2) is turned ON.

OUT2 Output display (Red)

Displays the current pressure condition, setting

mode, and error codes. A display colour type can

be selected from either a single colour display with

red or green, or 2-colour display in which green and

red are switched accordeing to the output. Four

different display settings are available.

LCD display

Range

For vacuum

pressure

For compound

pressure

For positive

pressure

Rated pressure range

0.0 to –101.0 kPa

—

–101 kPa

–100.0 to 100.0 kPa — –100 kPa 100 kPa

–0.100 to 1.000 MPa –0.1 kPa 0 1 MPa

Series ZSE30A

(

)

/ISE30A

2-Colour Display

High-Precision Digital Pressure Switch

Specifications

Piping Specifications

Model 01 N01 C4H C6H

Sensor pressure receiving area: Silicon

C3602 (electroless nickel plated)

O-ring: HNBR

N7H C4L C6L N7L

—

ø1/4 inch

—

ø6 mm

—

ø4 mm

ø5/32 inch

ø1/4 inch

—

ø6 mm

—

——————

ø4 mm

ø5/32 inch

—

NPT1/8

M5 x 0.8

—

R1/8

M5 x 0.8

— —

—

One-touch fitting, Straight type

One-touch fitting, Elbow type

Sensor pressure receiving area

Piping port

Including lead wire with connector (3 cores, 2 m)

Including lead wire with connector (4 cores, 2 m)

Excluding lead wire with connector

PBT, POM, Stainless steel 304, C3604 (electroless nickel plated)

O-ring: NBR

81 g

85 g

43 g

70 g

74 g

32 g

Port size

Wetted

parts

material

Weight

71 g

75 g

33 g

73 g

77 g

35 g

75 g

79 g

37 g

73 g

77 g

35 g

75 g

79 g

37 g

Optional Part No.

When optional parts are required separately, use the following part numbers to place an order.

ZS-38-A1

ZS-38-A2

ZS-27-C

ZS-27-D

ZS-27-01

ZS-38-3L

ZS-38-4L

ZS-38-3G

ZS-38-4G

Bracket A

Bracket B

Panel mount adapter

Panel mount adapter + front protection cover

Front protection cover

Lead wire with connector

Lead wire with connector (with connector cover)

Mounting screw (with 2 pcs. of M3 x 5L)

Mounting screw (with 2 pcs. of M3 x 8L)

3 cores, for 1 output, 2 m

4 cores, for 2 outputs, 2 m

3 cores, for 1 output, 2 m

4 cores, for 2 outputs, 2 m

Part no. Option Note

ZS-38-5L

ZS-38-U

ZS-38-C4H

ZS-38-C6H

ZS-38-N7H

ZS-38-C4L

ZS-38-C6L

ZS-38-N7L

ZS-38-H

Lead wire with a connector for copying

Lead wire unit with a connector for copying

One-touch fittings ø4 mm straight

One-touch fittings ø6 mm straight

One-touch fittings ø1/4 inch straight

One-touch fittings ø4 mm elbow

One-touch fittings ø6 mm elbow

One-touch fittings ø1/4 inch elbow

Operating manual CD-ROM

3 cores, copy function, 1 m

Copy function (up to 10 slaves)

O-ring, one-touch clip included

Part no. Option Note

Note 1) If applied pressure fluctuates near the set value, set the hysteresis above the fluctuation range to prevent chattering.

Note 2) When analogue the voltage output is selected, a simultaneous selection of switch output and current output is not available.

Note 3) When analogue the current output is selected, a simultaneous selection of switch output and voltage output is not available.

Model ZSE30A (Vacuum pressure)

Rated pressure range

Regulating pressure range

Proof pressure

Setting/display resolution

Applicable fluid

Power supply voltage

Current consumption

Switch output

Repeatability

Analogue

output

Hystere-

sis

Display

Display accuracy

Indicator light

Environ-

ment

resistance

Temperature characteristics

Lead wire

Standards

0.0 to –101.0 kPa

10.0 to –105.0 kPa

500 kPa

0.1 kPa

0.6 to 5 V ±2.5% F.S. or less (with rated pressure range)

ZSE30AF (Compound pressure)

–100.0 to 100.0 kPa

–105.0 to 105.0 kPa

500 kPa

0.1 kPa

Air, non-corrosive gas, non-flammable gas

12 to 24 VDC ±10%, Ripple (p-p) 10% or less (with power supply polarity protection)

40 mA or less

NPN or PNP open collector 1 output, NPN or PNP open collector 2 outputs (selectable)

80 mA

28 V (with NPN output)

1 V or less (with load current of 80 mA)

2.5 ms or less (with anti-chattering function: 20, 100, 500, 1000, 2000 ms)

With short circuit protection

±0.2% F.S. ±1 digit

±1% F.S. or less

Approx. 1 kΩ

±1% F.S. or less

4-digit, 7-segment, 2-colour LCD (Red and Green)

±2% F.S. ±1 digit (ambient temperature of 25 ±3°C)

Lights up when switch output is ON. OUT1: Green, OUT2: Red

IP40

Operating: 0 to 50°C, Stored: –10 to 60°C (no freezing or condensation)

Operating/Stored: 35 to 85% RH (no condensation)

1000 VAC for 1 minute between live parts and enclosure

50 MΩ or more between live parts and enclosure (at 500 VDC Mega)

10 to 150 Hz, 1.5 mm amplitude (or 20 m/s2 acceleration), in X, Y, Z directions, for 2 hours each (Non-energized)

100 m/s2 in X, Y, Z directions, 3 times each (non-energised)

±2% F.S. (based on 25°C)

CE Marking, UL/CSA, RoHS compliance

Variable (0 or above) Note 1)

ISE30A (Positive pressure)

–0.100 to 1.000 MPa

–0.105 to 1.050 MPa

1.5 MPa

0.001 MPa

Maximum load current

Maximum applied voltage

Residual voltage

Response time

Short circuit protection

Voltage

output

Hysteresis mode

Window comparator mode

Enclosure

Operating temperature range

Operating humidity range

Withstand voltage

Insulation resistance

Vibration resistance

Impact resistance

1 to 5V ±2.5% F.S. or less (with rated pressure range)

2.4 to 20 mA ±2.5% F.S. or less (with rated pressure range)

4 to 20 mA ±2.5% F.S. or less (with rated pressure range)

Output voltage

Linearity

Output impedance

Current

output

Output current

Linearity

Load impedance Maximum load impedance: 300 Ω with power supply voltage of 12 V; 600 Ω with power supply voltage of 24 V

Minimum load impedance: 50 Ω

Oilproof heavy-duty vinyl cable, 3 cores ø3.5, 2 m

4 cores Conductor area: 0.15 mm2 (AWG26), Insulator O.D.: 1.0 mm

Note 2)

Note 3)

Series ZSE30A

(

)

/ISE30A

Descriptions

Analogue Output

Output voltage Output current

0.6

Pressure

BA C

Analogue output [V]

2.4

Pressure

BA C

Analogue output [mA]

Functions (Refer to pages 10 and 11 for details.)

Copy function

Auto-preset function

Precision indicator setting function

Peak display function

Bottom display function

Key lock function (Security code

input can be selected)

Zero-out function

Anti-chattering function

Unit display switching function

Power-saving mode

kPa⇔MPa switch function

Display resolution-switch function

Copies the settings of the master sensor to the slave sensors.

Calculates and enters rough set values automatically from the actual operating conditions.

Evens out deviations in the displayed value.

Can retain the maximum pressure value displayed during measurement.

Can retain the minimum pressure value displayed during measurement.

The key board can be locked to prevent any incorrect function of the switch.

The pressure display can be set at zero when the pressure is open to the atmosphere.

Prevents possible malfunction due to sudden fluctuations in the primary pressure by adjusting the response time.

Can convert the display value.

Reduces power consumption.

Converts display resolution from the normal value of 1/1000 to 1/100.

It reduces the monitor to flicker.

Converts the unit between kPa and MPa.

Displays unit being used (only kPa and MPa).

Unit display

Lights up when switch output (OUT1) is turned ON.

OUT1 Output display (Green)

Use this button to select the mode or increase the

ON/OFF set value.

It is also used for switching to the peak display

mode.

UP button

Use this button to switch the mode and set the set

value.

S SET button

Use this button to select the mode or decrease the

ON/OFF set value.

It is also used for switching to the bottom value

display mode.

DOWN button

Lights up when switch output (OUT2) is turned ON.

OUT2 Output display (Red)

Displays the current pressure condition, setting

mode, and error codes. A display colour type can

be selected from either a single colour display with

red or green, or 2-colour display in which green and

red are switched accordeing to the output. Four

different display settings are available.

LCD display

Range

For vacuum

pressure

For compound

pressure

For positive

pressure

Rated pressure range

0.0 to –101.0 kPa

—

–101 kPa

–100.0 to 100.0 kPa — –100 kPa 100 kPa

–0.100 to 1.000 MPa –0.1 kPa 0 1 MPa

Series ZSE30A

(

)

/ISE30A

2-Colour Display

High-Precision Digital Pressure Switch

–

Brown DC (+)

Black OUT

Blue DC (–)

FUNC

Load

–

Load

Brown DC (+)

Black OUT

Blue DC (–)

FUNC

12 to

24 VDC

Brown DC (+)

Black OUT1

White OUT2

FUNC

Blue DC (–)

Load

–

12 to

24 VDC

Brown DC (+)

Black OUT1

White OUT2

FUNC

Blue DC (–)

Load

–

12 to

24 VDC

12 to

24 VDC

Main circuit

Main circuit Main circuit

Internal Circuits and Wiring Examples

Max. 80 mA

Residual voltage 1 V or less

Max. 28 V, 80 mA

Residual voltage 1 V or less

Max. 80 mA

Residual voltage 1 V or less

Max. 28 V, 80 mA

Residual voltage 1 V or less

Z/ISE30A

(

)

Output

NPN (1 output)

NPN (2 outputs)

PNP (2 outputs)

PNP (1 output)

Note) The FUNC terminal is connected using a dedicated lead wire (ZS-38-5L or ZS-38-U) when the copy function is used. (Refer to “Copy function” on page 10.)

Series ZSE30A

(

)

/ISE30A

Load

Brown DC (+)

Black OUT1

Blue DC (–)

FUNC

White OUT2 +

–

12 to

24 VDC

Load

Brown DC (+)

Black OUT1

Blue DC (–)

FUNC

White OUT2 +

–

12 to

24 VDC

Load

Brown DC (+)

Black OUT1

Blue DC (–)

FUNC

–

12 to

24 VDC

White OUT2

Load

Brown DC (+)

Black OUT1

Blue DC (–)

FUNC

–

12 to

24 VDC

White OUT2

Main circuit

Max. 28 V, 80 mA

Residual voltage 1 V or less

Analogue current output

Max. load impedance:

Power supply voltage 12 V: 300 Ω

Power supply voltage 24 V: 600 Ω

Min. load impedance: 50 Ω

Max. 80 mA

Residual voltage 1 V or less

Analogue current output

Max. load impedance:

Power supply voltage 12 V: 300 Ω

Power supply voltage 24 V: 600 Ω

Min. load impedance: 50 Ω

Max. 28 V, 80 mA

Residual voltage 1 V or less

Analogue voltage output

Output impedance: Approx. 1 kΩ

Max. 80 mA

Residual voltage 1 V or less

Analogue voltage output

Output impedance: Approx. 1 kΩ

NPN (1 output) + Analogue voltage output

PNP (1 output) + Analogue voltage output

NPN (1 output) + Analogue current output

PNP (1 output) + Analogue current output

Note) The FUNC terminal is connected using a dedicated lead wire (ZS-38-5L or ZS-38-U) when the copy function is used. (Refer to “Copy function” on page 10.)

Series ZSE30A

(

)

/ISE30A

2-Colour Display

High-Precision Digital Pressure Switch

–

Brown DC (+)

Black OUT

Blue DC (–)

FUNC

Load

–

Load

Brown DC (+)

Black OUT

Blue DC (–)

FUNC

12 to

24 VDC

Brown DC (+)

Black OUT1

White OUT2

FUNC

Blue DC (–)

Load

–

12 to

24 VDC

Brown DC (+)

Black OUT1

White OUT2

FUNC

Blue DC (–)

Load

–

12 to

24 VDC

12 to

24 VDC

Main circuit

Main circuit Main circuit

Internal Circuits and Wiring Examples

Max. 80 mA

Residual voltage 1 V or less

Max. 28 V, 80 mA

Residual voltage 1 V or less

Max. 80 mA

Residual voltage 1 V or less

Max. 28 V, 80 mA

Residual voltage 1 V or less

Z/ISE30A

(

)

Output

NPN (1 output)

NPN (2 outputs)

PNP (2 outputs)

PNP (1 output)

Note) The FUNC terminal is connected using a dedicated lead wire (ZS-38-5L or ZS-38-U) when the copy function is used. (Refer to “Copy function” on page 10.)

Series ZSE30A

(

)

/ISE30A

Load

Brown DC (+)

Black OUT1

Blue DC (–)

FUNC

White OUT2 +

–

12 to

24 VDC

Load

Brown DC (+)

Black OUT1

Blue DC (–)

FUNC

White OUT2 +

–

12 to

24 VDC

Load

Brown DC (+)

Black OUT1

Blue DC (–)

FUNC

–

12 to

24 VDC

White OUT2

Load

Brown DC (+)

Black OUT1

Blue DC (–)

FUNC

–

12 to

24 VDC

White OUT2

Main circuit

Max. 28 V, 80 mA

Residual voltage 1 V or less

Analogue current output

Max. load impedance:

Power supply voltage 12 V: 300 Ω

Power supply voltage 24 V: 600 Ω

Min. load impedance: 50 Ω

Max. 80 mA

Residual voltage 1 V or less

Analogue current output

Max. load impedance:

Power supply voltage 12 V: 300 Ω

Power supply voltage 24 V: 600 Ω

Min. load impedance: 50 Ω

Max. 28 V, 80 mA

Residual voltage 1 V or less

Analogue voltage output

Output impedance: Approx. 1 kΩ

Max. 80 mA

Residual voltage 1 V or less

Analogue voltage output

Output impedance: Approx. 1 kΩ

NPN (1 output) + Analogue voltage output

PNP (1 output) + Analogue voltage output

NPN (1 output) + Analogue current output

PNP (1 output) + Analogue current output

Note) The FUNC terminal is connected using a dedicated lead wire (ZS-38-5L or ZS-38-U) when the copy function is used. (Refer to “Copy function” on page 10.)

Series ZSE30A

(

)

/ISE30A

2-Colour Display

High-Precision Digital Pressure Switch

Dimensions

One-touch fitting ø4 mm

ø5/32 inch elbow

C4L

One-touch fitting ø6 mm

elbow

C6L

One-touch fitting ø1/4 inch

elbow

N7L

1.5

25 8 9.5

Lead wire with connector

01: R1/8

N01: NPT1/8

20±0.1 2 x M3 x 0.5

thread depth 4

M5 x 0.8

Width

across

flats 12

20±0.1

17.55

ø9.8

ø14

10.85

20.7

15.6

ø9.3

10.85

ø14

17.95

ø10

10.85

22.85

16.1

ø11.6

10.85

21.75

ø10.3

ø14

10.85

23.45

16.1

ø12

10.85

Z/ISE30A

(

)

Piping

01 N01

One-touch fitting ø4 mm

ø5/32 inch straight

C4H

One-touch fitting ø6 mm

straight

C6H

One-touch fitting ø1/4 inch

straight

N7H

Series ZSE30A

(

)

/ISE30A

Note) Bracket configuration allows mounting

in four directions.

Note) Bracket configuration allows mounting

in four directions.

With bracket

5.2

9.6

14.7

34.6

42.5

(41.4)

5.5

7.5

7.2

5.2

9.1

13.6

5.2

16.4

1.6 25

Z/ISE30A

(

)

Option 2

Bracket A

(Option unit part no.: ZS-38-A1)

Bracket B

(Option unit part no.: ZS-38-A2)

42.5

Series ZSE30A

(

)

/ISE30A

2-Colour Display

High-Precision Digital Pressure Switch

Dimensions

One-touch fitting ø4 mm

ø5/32 inch elbow

C4L

One-touch fitting ø6 mm

elbow

C6L

One-touch fitting ø1/4 inch

elbow

N7L

1.5

25 8 9.5

Lead wire with connector

01: R1/8

N01: NPT1/8

20±0.1 2 x M3 x 0.5

thread depth 4

M5 x 0.8

Width

across

flats 12

20±0.1

17.55

ø9.8

ø14

10.85

20.7

15.6

ø9.3

10.85

ø14

17.95

ø10

10.85

22.85

16.1

ø11.6

10.85

21.75

ø10.3

ø14

10.85

23.45

16.1

ø12

10.85

Z/ISE30A

(

)

Piping

01 N01

One-touch fitting ø4 mm

ø5/32 inch straight

C4H

One-touch fitting ø6 mm

straight

C6H

One-touch fitting ø1/4 inch

straight

N7H

Series ZSE30A

(

)

/ISE30A

Note) Bracket configuration allows mounting

in four directions.

Note) Bracket configuration allows mounting

in four directions.

With bracket

5.2

9.6

14.7

34.6

42.5

(41.4)

5.5

7.5

7.2

5.2

9.1

13.6

5.2

16.4

1.6 25

Z/ISE30A

(

)

Option 2

Bracket A

(Option unit part no.: ZS-38-A1)

Bracket B

(Option unit part no.: ZS-38-A2)

42.5

Series ZSE30A

(

)

/ISE30A

2-Colour Display

High-Precision Digital Pressure Switch

Dimensions

34.5

8.5

Panel thickness 0.5 to 6

7.2 17.8 8 9.5

R4.5

47.8

R4.5

33.5

42.4 11 17.8 8 9.5

Panel thickness 0.5 to 6

Panel mount

Z/ISE30A

(

)

Option 2

Panel mount adapter

(Option unit part no.: ZS-27-C)

Panel mount adapter + Front protection cover

(Option unit part no.: ZS-27-D)

Series ZSE30A

(

)

/ISE30A

1 pc. mounting Multiple (2 pcs. or more) horizontal mounting

Panel fitting dimensions

4 x R2 or less

31 0

–0.4

31 0

–0.4

24 or more

31 x n pcs. + 3.5 x (n pcs. – 1)

4 x R2 or less

31 0

–0.4

24 or more

31 x n pcs. + 3.5 x (n pcs. – 1)

4 x R2 or less

31 0

–0.4

Series ZSE30A

(

)

/ISE30A

Multiple (2 pcs. or more) vertical mounting

2-Colour Display

High-Precision Digital Pressure Switch

Dimensions

34.5

8.5

Panel thickness 0.5 to 6

7.2 17.8 8 9.5

R4.5

47.8

R4.5

33.5

42.4 11 17.8 8 9.5

Panel thickness 0.5 to 6

Panel mount

Z/ISE30A

(

)

Option 2

Panel mount adapter

(Option unit part no.: ZS-27-C)

Panel mount adapter + Front protection cover

(Option unit part no.: ZS-27-D)

Series ZSE30A

(

)

/ISE30A

1 pc. mounting Multiple (2 pcs. or more) horizontal mounting

Panel fitting dimensions

4 x R2 or less

31 0

–0.4

31 0

–0.4

24 or more

31 x n pcs. + 3.5 x (n pcs. – 1)

4 x R2 or less

31 0

–0.4

24 or more

31 x n pcs. + 3.5 x (n pcs. – 1)

4 x R2 or less

31 0

–0.4

Series ZSE30A

(

)

/ISE30A

Multiple (2 pcs. or more) vertical mounting

2-Colour Display

High-Precision Digital Pressure Switch

Master Slave

(Max. 10 units)

Unit 1 Unit 2 Unit 10

DC (+)

OUT1

OUT2

FUNC

DC (–)

DC (+)

OUT1

OUT2

FUNC

DC (–)

DC (+)

OUT1

OUT2

FUNC

DC (–)

DC (+)

OUT1

OUT2

FUNC

DC (–)

Brown

Gray

(Line for copying)

Blue

Brown

Gray

(Line for copying)

Blue

Brown

Gray

(Line for copying)

Blue

Brown

Gray

(Line for copying)

Blue

Power

Slave-side sensor

Unit 1 Unit 2

Unit n

(Max. 10 units)

ZS-38-5L (n + 1 pc.)

ZS-38-U

Master-side

sensor

Function Details

Note) When the precision indicator setting function is used,

set pressure value may change ±1 digit.

CPrecision indicator setting function (F6)

0Applied pressure

Displayed value at the time of shipment

Adjustable range of display calibration function

±5% R.D.

Display pressure value

DPeak and bottom display function

EKey lock function

This function prevents incorrect operations such as accidentally

changing the set-value.

FZero-out function

This function clears and resets the zero value on the display of mea-

sured pressure.

For the pressure switch with analogue output, the analogue output

shifts according to the indication. A displayed value can be adjusted

within ±7% F.S. of the pressure when ex-factory (±3.5% F.S. for

ZSE30AF).

BAuto-preset function (F5)

Auto-preset function, when selected in the setting, calculates and stores the set-value from the measured pressure.

The optimum set-value is determined automatically by repeating vacuum and break with the target workpiece several times.

Fine adjustment of the indicated value of the pressure sensor can be

made within the range of ±5% of the read value. The scattering of

the indicated value can be eliminated.

Suction Verification

Work 1 Work 2

Work 1 Work 2 Work n

Work n

High

Vacuum

Max. A

P-1

n-1

Min. B

Atmosphere

Suction

Released

H-1

P_1 (P_2) = A – (A-B)/4

n_1 (n_2) = B + (A-B)/4

P_1 or P_2 H_1 or H_2

H_1 (H_2) = (A-B)/2

Formula for Obtaining the Set-Value

ACopy function (F97)

The settings of the master sensor can be copied to several slave sensors, which

reduces the time taken for setting and prevents the input of wrong values.

Settings can be copied to up to 10 slave sensors at once.

(Max. transmission distance: 4 m)

This function constantly detects and updates the maximum minimum

value and allows to hold the maximum/minimum pressure value.

When the buttons are simultaneously pressed for 1 second

or longer, while “holding”, the held value will be reset.

2) Force one sensor to be the master by button operation ini-

tially all sensors are set as slaves.

3) Press the button on the master sensor to start copying.

Steps to follow:

1) The sensors are connected by a dedicated lead wire

(ZS-38-5L for master and one slave or ZS-38-U for master

and up to 10 slaves). Copying is performed through a de-

dicated communication line.

Series ZSE30A

(

)

/ISE30A

HAnti-chattering function (F3)

A large bore cylinder or ejector consumes a large volume of air in operation and may expe-

rience a temporary drop in the supply pressure. This function prevents detection of such

temporary drops in the supply pressure as an error.

Principle

This function averages pressure values measured during the response time set by the user and then compares the average pressure value with

the pressure set point value to output the result on the switch.

If the switch does not recover to normal even after all of the above-mentioned solutions have been applied, consult SMC for investigation.

Pressure ↑

Momentary change

t (ms) t (ms) Time →

Time →

Averaging Averaging

Switch output

operation in

normal

conditions

OFF

Switch output

operation when

anti-chattering

function is on.

OFF

Pressure range

P-1

H-1

Available response time settings

20 ms, 100 ms, 500 ms, 1000 ms, 2000 ms

IUnit display switching function (F0)

Display units can be switched with this function.

Note) For the ZSE30A (vacuum pressure) and ZSE30AF (compound pressure), when

the display unit is MPa, setting and display resolutions are changed.

Display unit

Min. unit setting

0.1

kPa

0.001

MPaNote)

0.001

kgf/cm2

0.001

bar

bAr

0.01

psi

PSi

0.1

inHg

inH

0.1 0.001 0.001 0.001 0.01 0.1 1

1 0.001 0.01 0.01 0.1

mmHg

mmH

ZSE30A

(Vacuum pressure)

ZSE30AF

(Compound pressure)

ISE30A

(Positive pressure)

GError indication function

Condition

Error code

(LCD display)

Error description

Overcurrent

error

Residual

pressure error

Applied

pressure error

System error

Solution

Load current of switch output (OUT1) exceeds 80 mA. Shut off the power supply. After eliminating the out-

put factor that caused the excess current, turn the

power supply back on.

Reduce/increase supply pressure to within the re-

gulating pressure range.

Bring the pressure back to atmospheric pressure

and try using the zero-out function.

Load current of switch output (OUT2) exceeds 80 mA.

Supply pressure exceeds the maximum regulating pressure.

Supply pressure is below the minimum regulating pressure.

Internal data error

A pressure of ±7% F.S. of atmospheric pressure is applied in the

zero-out function (±3.5% F.S. or more for ZSE30AF). however,

the switch will automatically return to measuring mode in 1 se-

cond. Due to individual product differences, the setting range of

the zero-out function varies within ±1% F.S.

Shut off the power supply and turn the power

supply back on. If the power does not come back

on, please contact SMC for an inspection.

JPower-saving mode (F7)

It shifts to the power-saving mode without button operation for 30

seconds. It is set to the normal mode (power-saving mode is

OFF) when ex-factory (decimal points and operation indicator

light, only when the switch output is turned ON, blink in the po-

wer-saving mode.

KSecret code setting (F8)

It can be set whether code number input is required or not when

key is locked. It is set to input no code number when ex-factory.

F in brackets stand for the function codes. Refer to the operating

manual for how to operate and function codes in detail.

Series ZSE30A

(

)

/ISE30A

2-Colour Display

High-Precision Digital Pressure Switch

Master Slave

(Max. 10 units)

Unit 1 Unit 2 Unit 10

DC (+)

OUT1

OUT2

FUNC

DC (–)

DC (+)

OUT1

OUT2

FUNC

DC (–)

DC (+)

OUT1

OUT2

FUNC

DC (–)

DC (+)

OUT1

OUT2

FUNC

DC (–)

Brown

Gray

(Line for copying)

Blue

Brown

Gray

(Line for copying)

Blue

Brown

Gray

(Line for copying)

Blue

Brown

Gray

(Line for copying)

Blue

Power

Slave-side sensor

Unit 1 Unit 2

Unit n

(Max. 10 units)

ZS-38-5L (n + 1 pc.)

ZS-38-U

Master-side

sensor

Function Details

Note) When the precision indicator setting function is used,

set pressure value may change ±1 digit.

CPrecision indicator setting function (F6)

0Applied pressure

Displayed value at the time of shipment

Adjustable range of display calibration function

±5% R.D.

Display pressure value

DPeak and bottom display function

EKey lock function

This function prevents incorrect operations such as accidentally

changing the set-value.

FZero-out function

This function clears and resets the zero value on the display of mea-

sured pressure.

For the pressure switch with analogue output, the analogue output

shifts according to the indication. A displayed value can be adjusted

within ±7% F.S. of the pressure when ex-factory (±3.5% F.S. for

ZSE30AF).

BAuto-preset function (F5)

Auto-preset function, when selected in the setting, calculates and stores the set-value from the measured pressure.

The optimum set-value is determined automatically by repeating vacuum and break with the target workpiece several times.

Fine adjustment of the indicated value of the pressure sensor can be

made within the range of ±5% of the read value. The scattering of

the indicated value can be eliminated.

Suction Verification

Work 1 Work 2

Work 1 Work 2 Work n

Work n

High

Vacuum

Max. A

P-1

n-1

Min. B

Atmosphere

Suction

Released

H-1

P_1 (P_2) = A – (A-B)/4

n_1 (n_2) = B + (A-B)/4

P_1 or P_2 H_1 or H_2

H_1 (H_2) = (A-B)/2

Formula for Obtaining the Set-Value

ACopy function (F97)

The settings of the master sensor can be copied to several slave sensors, which

reduces the time taken for setting and prevents the input of wrong values.

Settings can be copied to up to 10 slave sensors at once.

(Max. transmission distance: 4 m)

This function constantly detects and updates the maximum minimum

value and allows to hold the maximum/minimum pressure value.

When the buttons are simultaneously pressed for 1 second

or longer, while “holding”, the held value will be reset.

2) Force one sensor to be the master by button operation ini-

tially all sensors are set as slaves.

3) Press the button on the master sensor to start copying.

Steps to follow:

1) The sensors are connected by a dedicated lead wire

(ZS-38-5L for master and one slave or ZS-38-U for master

and up to 10 slaves). Copying is performed through a de-

dicated communication line.

Series ZSE30A

(

)

/ISE30A

HAnti-chattering function (F3)

A large bore cylinder or ejector consumes a large volume of air in operation and may expe-

rience a temporary drop in the supply pressure. This function prevents detection of such

temporary drops in the supply pressure as an error.

Principle

This function averages pressure values measured during the response time set by the user and then compares the average pressure value with

the pressure set point value to output the result on the switch.

If the switch does not recover to normal even after all of the above-mentioned solutions have been applied, consult SMC for investigation.

Pressure ↑

Momentary change

t (ms) t (ms) Time →

Time →

Averaging Averaging

Switch output

operation in

normal

conditions

OFF

Switch output

operation when

anti-chattering

function is on.

OFF

Pressure range

P-1

H-1

Available response time settings

20 ms, 100 ms, 500 ms, 1000 ms, 2000 ms

IUnit display switching function (F0)

Display units can be switched with this function.

Note) For the ZSE30A (vacuum pressure) and ZSE30AF (compound pressure), when

the display unit is MPa, setting and display resolutions are changed.

Display unit

Min. unit setting

0.1

kPa

0.001

MPaNote)

0.001

kgf/cm2

0.001

bar

bAr

0.01

psi

PSi

0.1

inHg

inH

0.1 0.001 0.001 0.001 0.01 0.1 1

1 0.001 0.01 0.01 0.1

mmHg

mmH

ZSE30A

(Vacuum pressure)

ZSE30AF

(Compound pressure)

ISE30A

(Positive pressure)

GError indication function

Condition

Error code

(LCD display)

Error description

Overcurrent

error

Residual

pressure error

Applied

pressure error

System error

Solution

Load current of switch output (OUT1) exceeds 80 mA. Shut off the power supply. After eliminating the out-

put factor that caused the excess current, turn the

power supply back on.

Reduce/increase supply pressure to within the re-

gulating pressure range.

Bring the pressure back to atmospheric pressure

and try using the zero-out function.

Load current of switch output (OUT2) exceeds 80 mA.

Supply pressure exceeds the maximum regulating pressure.

Supply pressure is below the minimum regulating pressure.

Internal data error

A pressure of ±7% F.S. of atmospheric pressure is applied in the

zero-out function (±3.5% F.S. or more for ZSE30AF). however,

the switch will automatically return to measuring mode in 1 se-

cond. Due to individual product differences, the setting range of

the zero-out function varies within ±1% F.S.

Shut off the power supply and turn the power

supply back on. If the power does not come back

on, please contact SMC for an inspection.

JPower-saving mode (F7)

It shifts to the power-saving mode without button operation for 30

seconds. It is set to the normal mode (power-saving mode is

OFF) when ex-factory (decimal points and operation indicator

light, only when the switch output is turned ON, blink in the po-

wer-saving mode.

KSecret code setting (F8)

It can be set whether code number input is required or not when

key is locked. It is set to input no code number when ex-factory.

F in brackets stand for the function codes. Refer to the operating

manual for how to operate and function codes in detail.

Series ZSE30A

(

)

/ISE30A

2-Colour Display

High-Precision Digital Pressure Switch

These safety instructions are intended to prevent hazardous situations and/or equipment damage.

These instructions indicate the level of potential hazard with the labels of “Caution,” “Warning” or

“Danger.” They are all important notes for safety and must be followed in addition to International

Standards (ISO/IEC), Japan Industrial Standards (JIS) Note 1) and other safety regulations Note 2).

Note 1) ISO 4414: Pneumatic fluid power – General rules relating to systems.

ISO 4413: Hydraulic fluid power – General rules relating to systems.

IEC 60204-1: Safety of machinery – Electrical equipment of machines. (Part 1: General requirements)

ISO 10218-1992: Manipulating industrial robots -Safety.

JIS B 8370: General rules for pneumatic equipment.

JIS B 8361: General rules for hydraulic equipment.

JIS B 9960-1: Safety of machinery – Electrical equipment of machines. (Part 1: General requirements)

JIS B 8433-1993: Manipulating industrial robots - Safety.

etc.

Note 2) Labor Safety and Sanitation Law, etc.

1. The compatibility of the product is the responsibility of the person who designs the equipment

or decides its specifications.

Since the product specified here are used under various operating conditions, their compatibility with the specific equipment

must be based on specifications based or after analysis and or test results. The expected performance and safety assurance of

the equipment will be the responsibility of the person who has determined its compatibility with the product. This person should

also continuously review all specifications of the product referring to its latest catalog information, with a view to giving due

consideration to any possibility of equipment failure when configuring the equipment.

2. Only trained personnel should operate machinery and equipment.

The product specified here may become unsafe if handled incorrectly. The assembly, operation and maintenance of machines or

equipment including our products must be performed by an operator who is appropriately trained and experienced.

Do not service or attempt to remove components and machinery/equipment until safety is confirmed.

1. Inspection and maintenance of machinery/equipment should only be performed after confirmation of safe locked-out control

positions.

2. When the product is to be removed, confirm that the safety process as mentioned above are implemented and the power from

any appropriate source is cut, and read/understand the specific product precautions carefully.

3. Before machinery/equipment is restarted, take measures to prevent unexpected operation and malfunction.

4. Contact SMC if the product is to be used in any of the following conditions.

1. Conditions and environments beyond of the given specifications, or if product is used outdoors.

2. Installation on equipment in conjunction with atomic energy, railways, air navigation, space, shipping, vehicles, military,

medical treatment, combustion and recreation, food and beverages, emergency stop circuits, press applications, safety

equipment or other applications unsuitable for the standard specifications described in the product catalogue.

3. An application which could have negative effects on people, property, or animals and therefore requires special safety

analysis.

4. Use in an interlock circuit, which requires the provision of double interlock for possible failure by using a mechanical pro tective

function, and periodical checks to confirm proper operation.

Warning

Caution: Operator error could result in injury or equipment damage.

Danger : In extreme conditions, there is a possibility of serious injury or loss of life.

Warning

: Operator error could result in serious injury or loss of life.

Safety Instructions

Limited Warranty and Disclaimer/Compliance Requirements

The product used is subject to the following “Limited Warranty and Disclaimer” and “Compliance

Requirements”. Read and accept them before using the product.

The product is provided for use in manufacturing industries.

The product herein described is basically provided for peaceful use in manufacturing industries.

If considering using the product in other industries, consult SMC beforehand and exchange specifications or a contract

if necessary. If anything is unclear, contact your nearest sales branch.

Caution

Limited Warranty and Disclaimer

1. The warranty period of the product is 1 year in service or 1.5 years after it is delivered.Note)

The product may also have specified durability, running distance or replacement parts. Please

consult your nearest sales point.

2. For any failure or damage reported within the warranty period which is clearly SMC's responsibi-

lity, replacement product/parts will be provided.

This limited warranty applies only to SMC's product independently, and not to any other damage

incurred due to the failure of it.

Note) Vacuum pads are excluded from this 1 year warranty.

A vacuum pad is a consumable part, so it is warranted for a year after is deliver.

Also, even within the warranty period, the wear of a product due to the use of the vacuum pad or failure due to the

deterioration of rubber material are not covered by the limited warranty.

Compliance Requirements

When the product is exported, strictly follow the laws required by the Ministry of Economy, Trade

and Industry (Foreign Exchange and Foreign Trade Control Law).

Safety Instructions

Back page 1