SMC Networks EZ Connect Turbo SMC2455W User manual

SMC2455W

Copyright
Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and
reliable. However, no responsibility is assumed by SMC for its use, nor for any
infringements of patents or other rights of third parties which may result from its use.
No license is granted by implication or otherwise under any patent or patent rights of
SMC. SMC reserves the right to change specifications at any time without notice.
Copyright © 2002 by
SMC Networks, Inc.
38 Tesla
Irvine, California 92618
All rights reserved. Printed in Taiwan
Trademarks
SMC is a registered trademark; and EZ Connect and EZ Hub are trademarks of SMC
Networks, Inc. Other product and company names are trademarks or registered trade-
marks of their respective holders.

1
Compliances
FCC Class B
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communi-
cations. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one
of the following measures:
•Reorient or relocate the receiving antenna.
•Increasethe separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
•Consultthe dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly
approved by the party responsible for compliance could void
the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.

2
IMPORTANT NOTE
FCC Radiation Exposure Statement: This equipment complies
with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your
body.
This transmitter must not be co-located or operating in con-
junction with any other antenna or transmitter.
Industry Canada - Class B
This digital apparatus does not exceed the Class B limits for
radio noise emissions from digital apparatus as set out in the
interference-causing equipment standard entitled “Digital
Apparatus,” ICES-003 of the Department of Communications.
Cet appareil numérique respecte les limites de bruits radioélec-
triques applicables aux appareils numériques de Classe B pre-
scrites dans la norme sur le matérial brouilleur:“Appareils
Numériques,” NMB-003 édictée par l’Industrie.

3
Warranty
Limited Warranty Statement: SMC Networks, Inc. (“SMC”) war-
rants its products to be free from defects in workmanship and
materials, under normal use and service, for the applicable war-
ranty term. All SMC products carry a standard 90-day limited
warranty from the date of purchase from SMC or its Authorized
Reseller. SMC may, at its own discretion, repair or replace any
product not operating as warranted with a similar or functionally
equivalent product, during the applicable warranty term. SMC
will endeavor to repair or replace any product returned under
warranty within 30 days of receipt of the product.
The standard limited warranty can be upgraded to a Limited
Lifetime* warranty by registering new products within 30 days
of purchase from SMC or its Authorized Reseller. Registration can
be accomplished via the enclosed product registration card or
online via the SMC web site. Failure to register will not affect the
standard limited warranty. The Limited Lifetime warranty covers a
product during the Life of that Product, which is defined as the
period of time during which the product is an “Active” SMC prod-
uct. A product is considered to be “Active” while it is listed on the
current SMC price list. As new technologies emerge, older tech-
nologies become obsolete and SMC will, at its discretion, replace
an older product in its product line with one that incorporates
these newer technologies. At that point, the obsolete product is
discontinued and is no longer an “Active” SMC product. A list of
discontinued products with their respective dates of discontinu-
ance can be found at:
http://www.smc.com/index.cfm?action=customer_service_warranty
All products that are replaced become the property of SMC.
Replacement products may be either new or reconditioned. Any
replaced or repaired product carries either a 30-day limited
|warranty or the remainder of the initial warranty, whichever is
longer. SMC is not responsible for any custom software or

4
firmware, configuration information, or memory data of
Customer contained in, stored on, or integrated with any
products returned to SMC pursuant to any warranty. Products
returned to SMC should have any customer-installed accessory
or add-on components, such as expansion modules, removed
prior to returning the product for replacement. SMC is not
responsible for these items if they are returned with the product.
Customers must contact SMC for a Return Material
Authorization number prior to returning any product to SMC.
Proof of purchase may be required. Any product returned to
SMC without a valid Return Material Authorization (RMA) num-
ber clearly marked on the outside of the package will be
returned to customer at customer’s expense. For warranty
claims within North America, please call our toll-free customer
support number at [phone]. Customers are responsible for
all shipping charges from their facility to SMC. SMC is responsible
for return shipping charges from SMC to customer.

WARRANTIES EXCLUSIVE: IF AN SMC PRODUCT DOES NOT OPERATE AS WAR-
RANTED ABOVE, CUSTOMER’S SOLE REMEDY SHALL BE REPAIR OR REPLACE-
MENT OF THE PRODUCT IN QUESTION, AT SMC’S OPTION. THE FOREGOING
WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER
WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, EITHER IN FACT OR BY
OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES
OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. SMC NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO
ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE,
INSTALLATION, MAINTENANCE OR USE OF ITS PRODUCTS. SMC SHALL NOT
BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DIS-
CLOSE THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS
CAUSED BY CUSTOMER’S OR ANY THIRD PERSON’S MISUSE, NEGLECT,
IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO
REPAIR, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE,
OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD.
LIMITATION OF LIABILITY: IN NO EVENT,WHETHER BASED IN CONTRACT OR
TORT (INCLUDING NEGLIGENCE), SHALL SMC BE LIABLE FOR INCIDENTAL,
CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND,
OR FOR LOSS OF REVENUE, LOSS OF BUSINESS, OR OTHER FINANCIAL LOSS
ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION, MAIN-
TENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF ITS PROD-
UCTS, EVEN IF SMC OR ITS AUTHORIZED RESELLER HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE
EXCLUSION OF IMPLIED WARRANTIES OR THE LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS, SO THE ABOVE
LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, WHICH MAY VARY
FROM STATE TO STATE. NOTHING IN THIS WARRANTY SHALL BE TAKEN TO
AFFECT YOUR STATUTORY RIGHTS.
SMC Networks will provide warranty service for one year following discontin-
uance from the active SMC price list. Under the limited lifetime warranty,
internal and external power supplies, fans, and cables are covered by a stan-
dard one-year warranty from date of purchase.
SMC Networks, Inc.
38 Tesla
Irvine, CA 92618
Product Registration
Please register your EZ Connect Turbo 2.4GHz 11/22 Mbps Wireless Access
Point online to activate your warranty:
Registration website:
http://www.smc.com/index.cfm?action=customer_service_new_registration
5

Congratulations on your purchase of this EZ Connect™ Turbo
2.4GHz 11/22 Mbps Auto-Sensing Wireless Access Point. The EZ
Connect™ Turbo Wireless Access Point is the perfect device for
adding wireless connectivity to your Ethernet network, or
expanding and existing wireless network. Plug and Play installation
allows users to easily set up this Wireless Access Point in minutes.
By offering both a Windows-based and Web-based administration
utility, the EZ Connect Turbo Wireless Access Point can be managed
from any PC on your network.To secure this wireless connection,
the EZ Connect Turbo Wireless Access Point supports
64/128/256-bit Wired Equivalent Privacy (WEP) encryption.
Feature Highlights:
•IEEE 802.11b high-speed wireless connection up to 22 Mbps.
•Supportsextra Packet Binary Convolutional Coding (PBCC)
modulation technique.
•Plug-and-Play installation.
•64/128/256-bit WEP encryption and MAC address filtering
function to ensure secure wireless data transmission.
•Supports a maximum of 253 users.
Compatibility:
•IEEE 802.3, 802.3u
•IEEE 802.11b
•Wi-FiComplaint
The EZ Connect Turbo Wireless Access Point package includes
the following:
•One EZ Connect™ Turbo 11/22 Mbps Wireless Access Point
•One CD containing EZ Installation Wizard, Utility Software and
Complete Documentation
•OnePower Adapter
•One Manual
Minimum Requirements:
•An A/C power outlet (100 – 240V, 50 – 60Hz), to supply power
to the EZ Connect Turbo Wireless Access Point.
•An available RJ-45 port on a 10BASE-T/100BASE-TX Ethernet
device.
6

7
Section 1 | Getting Started
Site Location
Choose a location for your EZ Connect Turbo Wireless Access
Point. Usually, the best location is at the center of your wireless
coverage area.
Connect the Ethernet cable
The EZ Connect Turbo Wireless Access Point should be connect-
ed to a network switch or hub that is connected to a DHCP serv-
er, or connected to a Barricade Broadband Router. Use a stan-
dard Category 5 UTP Ethernet cable with an RJ-45 connector to
connect the Access Point to one of router, hub, or switch.
Connect the power cable
Connect the power adapter cable to the 5V DC power socket on
the rear panel.
Warning: Use only the power adapter supplied with the
SMC2455W. Using another power adapter will cause
damage to the unit and void the warranty.
Antennas
LED Indicator lights:
•Power
•Wireless Transmit/Receiver
•Ethernet Link/Activity