SMITH SYSTEM Planer Studio 77248 User manual

Document #: 179682
10/2019
Assembly Instructions
PLANNER STUDIO POWER
STRIP ASSEMBLY
INSTRUCTIONS

Document #: 179682
10/2019
Hardware and Components
BOLT ON POWER STRIP
BRACKET QTY. 1
BOLT ON POWER STRIP BACK BRACKET
QTY. 1
1/4”-20 X ½” SOCKET CAP SCREW
QTY. 4
5/32 ALLEN KEY
QTY. 1

Document #: 179682
10/2019
Special Notes:
•Check that all components are accounted for and undamaged beforeassembling.
•Please assemble the product in a clean and dry area.
•Clean the product with a mild cleaner and a damp cloth.
If you have damaged or missing components, please contact
customer service at 1-800-328-1061

Document #: 179682
10/2019
Assembly Instructions
1. Place the bolt on power strip back bracket on the inside of the planner studios cross
brace. It will fit inside the rectangular cutout.
Helpful Hint: It is possible to attach this bracket to a fully assembled Planner Studio
Table with the top already on it. The bolt on power strip back bracket will need to be
inserted through the rectangular cutout in the planner studio cross brace.

Document #: 179682
10/2019
2. Using the included 5/32” Allen key, insert and tighten the 4x ¼-20 x 1/2”
screws as shown.
Helpful Hint: The bolt on power strip bracket can be mounted in increments of
90 degrees.

Document #: 179682
10/2019
3. Optional: The power cord can be routed into the cross brace and back out for cable
management.

Document #: 179682
10/2019