SNO GDV07 User manual

User Manual of HD Video Output
Sunglasses Camera
 Product Accessories
●Sunglasses camera ● USB cable ●Charger
●User manual CD ●a clip ●Glasses bag and cloth
 Picture & Buttons
1. Camera 2.Power on/off/Record 3.SD card Slot
4. MIC 5.USB interface 6.Reset
7. Indicator Light
 Technical Data
1) Main functions: recording video and audio simultaneously, Web camera, TV
Video output, USB drive, sunglasses
2) Resolution: 5 million pixels
3) Video format: AVI, 1280*720
4) External memory: micro SD card 2GB-32GB,Max 32GB
5) USB: 2.0 (Hs)
6) Charging time: 2.5-3 hours
7) Battery use time: Polymer Li battery. can use 2 -3 hours continually
8) Operation systems: No need for driver installation if the operating system is

Windows ME/ 2000/ XP/ Vista or above (Windows98 is excepted)
 Operation
Before using this device please insert Micro SD card or TF card. When inserting the
card, please let the side with metal of the card towards button.
Note:
Without insert TF card, the blue light will flash continuously after power on.
 Power On
Under power off mode, long press the Power on/Off /Record button for three seconds,
Blue light will flash 5 times to enter to the recording mode. Under the recording
working time, blue light will flash slowly. Short press the Power on/off/record button,
then glasses stops recording and keeps the video automatically. If you want to record
more, please repeat the above operations.
 Switch Off
Under standby mode, long press the power on / off /Record button, the blue light will
be off, buzzer prompts on time at the same time. It proves that the camera have
powered off.
Note: Device will keep to one file automatically after 10 minutes.
 Reset
Insert the clip into the RESET hole to restart slightly the device once it does not work
normally under incorrect operations or other unknown reasons.
Note: Under recording video mode, if you shut down the camera by reset button,
video files will not be saved.
 Charging
 Under standby mode, connect the camera to the computer via a USB cable, Red
light keeps on, blue light will be flashing fast. Indicating the camera is charging,
when blue light is off, the red light keeps on, it is fully charged;
 By charger that we distributed. The green light keeps on, indicate that the camera
is charging, green light is off, it’s full charged.
 The camera built-in high capacity lithium polymer battery with memory effect, so

the initial use of the first five times, please charge the battery after run out of
power to active the battery maximum capacity and obtain standard working
hours.
 Web Camera
Connect USB to computer without memory card, and then enter into webcam mode
directly. (It needs to install STK03NU Driver first when first time use the function).
 Playback
Playback
Finishing recording video/ taking photo connect the camera to the computer with a
USB data cable, red light keeps on, then long press power on/off/record button, red
light keeps on, blue light is flashing fast. Click on removable disk, and select the video
file you can double-click the computer to play. Please ensure that the relevant player
software have been installed before connect sun glasses to computer. Double-click to
see photos.
 Setting Time
The software has added the function that can show the time on the video and picture.
Please operate it as follow;
Edit one file named “time” as the format” “2011.12.12 12:12:12 Y””, then copy the file
to the root of the root disk of the camera.
The time system of the camera will be reset when the glasses started next time.
 Note
1. For saving power, under the standby mode, the device will power off automatically if
no any operations within 20 seconds.
2. When it is recording, if power is low, the system will first save the video content first,
then automatically shut down.
3. Under continuous recording, the system will automatically generate a new video file
after every operation,.
4. Please keep the camera in brighter environment, to maintain the camera vertical
and stable, and keep the review within a certain distance to obtain better effect.
5. The time of PC recognizing the device is different according to its different system

and configuration, so please not operate during recognizing. If the device can’t be
recognized, please check your computer’s operation system, device drivers, USB port
and the USB cable is normal, and then connect the hardware again.
6. Remember that when you tap with the paper clip to reset, Please slightly to avoid
damage other components.