Snoppa M1 User manual

CONTENTS
Introduction 2
At a galance 3
Modes 4
Install 5
Operation(turn on) 6
Snoppa M1 8
Function button and LED indicator 8
WorkingModes 10
Shooting Modes 11
Angle Adjustment 13
WeightStack Compatibilty 14
Snoppa App 15
Download and Installation 15
Connect Snoppa App 15
SnoppaAppSettings 17
Specifications 20
Package Content 21
Other 22
1 snoppa

Introduction
Introduction
Introduction
AtaGalance
The Snoppa M1 is an advanced 3-axis gimbal that
stabilizer and controls your smartphone, desined by
Snoppa Tech Company.
PAN
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
TILT
ROLL
[1] PAN Motor
[2] TILT Motor
[3] weight stack
[4] ROLL Motor
[6] foldable mobile phone holder
[7] bluetooth LED & function button
[8] micro usb port
[9] Handlebar
STARAGED M1 EXPANDED [5] 1/4 screw mount
2 Snoppa 3 Snoppa

Modes
Install
Modes
STANDBY WORKING
working mode
( APP connected or
discennected )
Install
Install Device
[1].unfoldmobile
phoneholder
[3].balance the mobile
phone in the middle
hold the tilt motor into
handlebar, M1 into standby
mode.
App disconnected ， after
20s, M1 goes into standby
mode
wake up on standby
TILT
move tilt motor down to 60
degree or more, M1 will be
active.
OFF MODE
APP discennected ，
M1 turned off
SLEEPMODE
After more than 30 minutes
without any operation in
standby mode ， M1
automatically goes into sleep
mode, Bluetooth can’t be
found. To be reconnected,
one short press, Bluetooth
will be active again.
[2]Clamp smartphone into the holder
4 Snoppa 5 Snoppa

Operation
Operation
Operation(turn on)
A.WITHOUT SNOPPA APP B.WITH SNOPPA APP
[1]. Mount mobile phone,Pull out handbar ；
CAUTION
NIPPING
HAND TILT
[1] [3]
[1]. APP Download and installation
iPhone users can sacn the bacode below to
intall our APP , or search “snoppa”at APP Store
or Google Play and install our APP.
[2]. Turn on your Bluetooth on your phone,
launch Snoppa APP, select the Bluetooth icon,
into bluetooth setting, select your M1 device
（ default name SNOPPA-xxxx ， default
passWord: 000000 ）, Pair with moblie phone.
[2]. A short press LED indicator (LED starts blink),
then long press LED indicator untill LE D keeps on.
[3].pull out handlebar, keep the intersection angle
between tilt motor and handlebar at least 60,
gimbal start working.
M1 workingas defaultmode
Bluetooth icon
[3]. Pull out handlebar, plumb tilt motor, gimbal
startworking.
6 Snoppa 7 Snoppa

SNOPPA M1
SNOPPA M1
Snoppa M1
Function buttonand LED indicator
BLINKING PATTERN
ThereisonlyphysicalbuttononSnoppaM1.It’sboth
functionbuttonandLedindicator
bluetooth LED
& function button
Blinkingpattern
LEDon
Green blinks fast
(on 0.2s, off 0.2s)
Greenblinks
(on 0.2s, off 1.5s)
Greenblinksslowly
Iscreption
M1 on working mode
／ bluetooth discennected,
App standby mode ／ full charged
Single press
Bluettoth connection states
(on1.0s,off1.0s) Charging
BUNTTONPATTERN
buntton pattern
single press
short press+long press(2s)
long press(2s)
Discreption
active bluetooth
／switchworkingmode
turnM1on
turnM1off
Redblinksslowly
(on1.0s,off1.0s)
LED off
lowbatterywarning
Off mode
longpress(10s) bluetooth restoration
8 Snoppa 9 Snoppa

SNOPPA M1
SNOPPA M1
Working Modes ShootingModes
PANTRACK
rollandtiltmotorislocked,pancamerabymovingthe
handle
OMNI TRACK
roll motor is locked ， pan and tilt camera by moving
the handle
Porerait Mode landscapMode
LOCK
roll, tilt and pan motor are locked
Switch working mode
SWITCH
landscap Mode Porerait Mode
InPoreraitMode,youcanrotatemobilephone90o toleftorrightby
hand
with App
without App
switch via App
press LED indicator
(switch on a loop)
10 Snoppa 11 Snoppa

SNOPPA M1
SNOPPA M1
Angle Adjustment
Porerait Mode
landscapMode
At all the work modes ， shooting angle can be adjust by
hand.
Automatic switching ：
automatically switch to
the landscap mode;
Manual switching ：
PAN TRACK
1.Pan islocked,Tiltisadjustable
2.Porerait Mode: Pan is adjustable, Tilt is adjustable
OMNI TRACK
1.landscap Mode: Pan is locked,Tilt is adjustable
2.Porerait Mode: Pan is adjustable, Tilt is adjustable
LOCK Panisadjustable,Tiltisadjustable
AngleAdjustmentRange
In Porerait Mode, Adjust to horizontal direction by your
hand
In portrait mode, if your mobile phone still canot be balanced
when the tilt motor is vertical, you need to switch your weight
stack.
PAN
TILT
Anyangle
landscapMode:35
o
~85
o
PoreraitMode:Anyangle
12 Snoppa 13 Snoppa

SNOPPA M1
SNOPPA App
Weight Stack Compatibilty
SNOPPA App
PLACE
SMARTPHONE
WEIGHT STACK
Snoppa M1 works with Snoppa App ， user can change
camera and M1 settings. With Snoppa App, user can
shoot timelapes and panorama easily.
Download and Installation
iPhone users can sacn the bacode below to intall our
APP, or search “snoppa”at APP Store or Google Play
andinstallourAPP.
WEIGHT STACK COMPATIBILTY
weight stack A weight stack B weight stack C
ConnectSnoppaApp
[1]. Turn on your Bluetooth on your phone, launch
Snoppa APP
[2]. Press bluetooth icon ， into bluetooth setting
＋＋bluetoothicon
plastic metal metal metal metal
(Disconnected)
compatiblewith
iphone5/6/7or
similarweight
mobilephone
compatiblewiththe
mobilephoneweight
between iphone
5/6/7plusorsimilar
weightmobilephone
compatible with
iphone6/7plus
orsimilarweight
mobilephone
Connected
14 Snoppa 15 Snoppa

SNOPPA App
SNOPPA App
SnoppaAppSettings
[3]. select your M1 device （ default name SNOPPA-xxxx ,
default passWord: 000000 ）, Pair with moblie phone.
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[1]
Camerasetting
Select camera setting : hutter 、 flash 、 WB 、
focaldistance 、 ISO
[2]
Shooting mode
video
panorama : Automatic 270
o
panoramic
timelapse
16 Snoppa 17 Snoppa

SNOPPA App
SNOPPA App
[3]
Startshooting
first press start recoreding ， second press stop ； Can
be hold in the middle of the shoot.
[4]
Switchback/front camera
[5]
Trackingmode
[8]
Resolution
Resolution:
540p HD 60HZ; 720p HD,30HZ ; 1080p HD,30HZ
1080p HD,60HZ ; 2160p HD,30HZ
pan track:
rollandtiltmotorislocked,pancameraby
movingthehandle
omni track:
roll motor is locked ， pan and tilt camera by
movingthehandle
lock
roll, tilt and pan motor are locked
[6]
Gallary
videos will be automaticly saved into Gallary ， user
can highlight videos by star level ， add into selected
list
[7]
Reference line
There are three options:
None/GridLine/Grid+Diagonals
[9]
System Setting
BlueToothSettings
GimbalSettings
Horizontal andVertical follow speed isadjustable ；
HorizontalandVerticalareasettingsisadjustable
Firmware Info
Firmware upgrade
The system will beprompted; upgrade process forabout
three minutes
User Guide
About Snoppa
[10]
Bluetoothconnection
after bluetooth connected, icon dispalys M1 battery
level
18 Snoppa 19 Snoppa

Specifications
Package content
Specifications Package content
Check that all the following items are in the package. If
ITEM
Model
Dimensions
Weight (battery included)
Controllable range
SPECS
SP-M1
Folded 208 x 53 x 43mm
Unfolded 266 x 53 x 43mm
450 g
Pan: 360˚free rotation
Tilt: ±100°
Roll: 360˚ free rotation
something ismissing, Please contact SnoppaTechnology
company or local dealer.
Snoppa M1 x 1
Mobile phone width range
Wireless
Runtime
BatteryType
Battery Capacity
Voltage
Charging temperature
Operating temperature
58-82mm
Bluetooth Low Energy
4Hours
Lipo
1050mAh(7770mWh)
7.4V
-20°~ 45°
-20°~ 45°
＋
Manual
Micro USB x1
Weight stack x 1
Warranty card x 1
Snoppa M1 Instruction x 1
20 Snoppa 21 Snoppa

Changesor modifications not expresslyapproved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
This equipment has been tested and found to comply with the
limitsfora ClassBdigitaldevice,pursuanttoPart15oftheFCC
Rules.Theselimitsaredesignedtoprovide reasonableprotection
againstharmful interference in a residential installation.This
equipmentgenerates,usesand canradiateradio frequencyenergy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorientorrelocate thereceiving antenna.
-- Increase the separation between the equipmentand receiver.
-- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-- Consult the dealeror anexperienced radio/TV technicianfor help.
22 Snoppa
ThisdevicecomplieswithPart15oftheFCCRules.Operationis
subject to the following two conditions:
(1) this device maynot cause harmful interference,and
(2) this device must accept any interference received, including
interference that may cause undesiredoperation.
If you have any questions about the document,
Please visit ourwebsite: www.snoppa.com
Copyright@2016-2020 SNOPPA All Rights Reserved