PROAIM P-MTCL-STD-BLK User manual

1
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Mitchell Heavy-duty Camera Tripod Stand
with Spreader (P-MTCL-STD-BLK)
Assembly Manua l
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
What’s In The Box
Mitchell Heavy-Duty
Camera Tripod
Stand with Spreader Bag Packing

2
Mitchell Tripod Stand with Spreader Setup
• Take out the Spreader and spread it on oor
and open the legs (as per your requirement)
of spreader with the help of provided knob.
• Now mount the Mitchell Tripod Stand on
Spreader, lock it in place with the rubber
grips
• Remove the uid head (Not Included) by
loosening the Castle ring and then mount it
on top of a Mitchell Tripod Stand.
• Posion the height of the Mitchell tripod
Stand by loosening all three adjustment
knobs, sliding the tripod up to the desired
height and re-ghten the knobs securely.
• Then, spread the Mid-Level Spreader of the
tripod according to your requirements.
Similarly, use all three adjustment boom
knobs aer spread the legs of stand make
sure all knobs ghten properly to secure your
setups.
• Aer mounng the uid head (Not Included)
on the Mitchell Tripod Stand, ghten the
Castle ring from the boom as shown in the
image.

3
• Remove the Fluid head top plate
(Not Included), by pushing the Push pin of the
uid head then aach the plate to the
boom, matching the camera's threads.
• Aer aaching the Fluid head plate
(Not Included), ghten it properly using a
screwdriver. Then mount the camera
(Not Included) onto the uid head by sliding.
• Now setup is ready to use.
• Secure the Camera with the help of the
locking knob of the uid head.
YOUR PROAIM MITCHELL HEAVY-DUTY CAMERA
TRIPOD STAND WITH SPREADER
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)

4
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon and
evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.