PROAIM SL-CSMO-01 User manual

1
Instruction Manual
Proaim Cosmo Camera
Slider Dolly (SL-CSMO-01)

2
At Proaim, our goal is to ensure 100% Customer Sasfacon in all that we do.
We back our sales with a 1 year warranty from the date of purchase and work hard
to resolve any problems in the unlikely event one should arise.
With our commitment to connuous improvement and your Feedback, building on
our reputaon of providing aordable, quality products is
PRIORITY #1.
Subject Page
Foreword 2
Introducon 3
Kit Included 4
Safety Hints 5
Assembling 6-10
Warranty 10-11
Table of Contents

3
Dear Client,
On behalf of all the people that work so hard to provide you with the most
up-to-date, exible and cost-ecient producon gear, we would like to welcome
you into the Proaim family.
By purchasing your Cosmo 8 Professional Camera Slider Dolly Camera Jib , you
have just joined a host of designers, engineers, machinists, assembly, customer
service and oce sta that take great pride in all that they do. Our mantra of
connuous improvement has been the guiding principle of how we conduct our
business since day one.
Once you have the opportunity to experience your new Proaim Cosmo 8
Professional Camera Slider Dolly, we hope you will agree that we cra quality
products at a compeve price. Products designed to meet and exceed the
standards of today’s real producon world.
Standards set by our valued clients and standards we strive to maintain.
With Best Wishes,
Proaim Team
Welcome To Proaim!

4
Proaim Cosmo Slider is designed for the mes where you just want to do a lile 6'
to 8' dolly move without a lot of setup. The Cosmo Slider is easy to set up, can
be used with a variety of track opons, and can be supported using standard
100mm stands, apple boxes, or the ground, whatever the shot requires.
Whether you're an established professional or just geng started, the Cosmo Slider
is a great soluon for adding producon value to your shoot. Designed to be
exible, aordable, and easy to set up, the design is both simple and praccal. The
Mitchell Mount with available adapters takes all types of camera heads. The eight
wheel design with 16 high-speed bearings provides a smooth glide.
Introducon
What’s In The Box
4 cosmo slider with camera slider
150mm Bowl
75mm conversion
ring
Female Euro
Mitchel plate
2 X 4 extension tubes
6 X End Feet
3 x Bowl mounng
adapters 2 x End Breaks
Bush with Screw
support bar
Please inspect the contents of your shipped package to ensure you have received
everything that is listed below.

5
Safety Hints
ATTENTION: PLEASE READ THIS BEFORE USING TO PREVENT SERIOUS
DAMAGE TO EQUIPMENT!
NEVER USE THE TRACK IN SAND, DIRT, CAUSTIC, OR SALT WATER
ENVIRONMENTS!
This will cause irreparable damage to the bearings and rails, requiring complete
replacement!
DO NOT OVERTIGHTEN CARRIAGE BRAKE!
Needlessly over ghtening the carriage brake can cause misalignment and severely
damage the roller bearings!
ALWAYS USE EXTREME CAUTION WHEN USING THE TRACK ON A
TRIPOD!
Load shi occurs when the camera moves along the track. This can cause the
camera and slider to tumble over resulng in catastrophic damage! Always use
sandbags on the legs and support on the ends to prevent this!
FOLLOWING THESE GUIDELINES WILL PROVIDE BETTER IMAGES AND TROUBLE FREE
OPERATION.
SHOULD YOU NEED ADDITIONAL INFORMATION, TECHNICAL ASSISTANCE IS AVAILA-
BLE ‘ONLINE’ BY CONTACTING YOUR SALES REPRESENTATIVE.

6
Assembling
 You will receive the cosmo 4 slider in camera plaorm aached to it. Loosen the knob to
move the top plaorm length and ghten it to lock when you need stac shots.
 Loosen the knob of support bar and insert the end feet into the support bar and ghten the
knob to secure properly.
 Slide the end break at both ends of the track and ghten the allen bolts to secure properly.

7
 Now 4 cosmo slider is ready to use you
can mount your camera setup, as
desired.
 Aach 4 Track secon with another 4 Track secon, by using push-t connecvity to
increase the length. Then ghten the allen bolts , as shown in image.
ASSEMBLING OF 8FT SLIDER
 Aach the support bar at the end of 8 length by sliding the track onto the support bar.
Tighten the align bolts with the help of allen key.
Note: Aach the track secon by proper align the secon to avoid jerk While using the slider.

8
 Slide the end break at both ends of the track and ghten the allen bolts to secure properly.
NOTE: Cosmo Slider accommodates 4 types of Camera Mounng Heads.
75mm Bowl / 100mm Bowl / 150mm Bowl / Mitchell Base
 The standard 100mm Bowl Receptacle is
aached by default onto the Dolly. Add
75mm Conversion Ring to use 75mm
Bowl Head with Dolly.
 Loosen the bolts with the help of allen key and remove the 100mm bowl as shown below.

9
 Mount your female euro directly to the
camera plaorm and ghten the four
allen bolts as shown. In order to use
euro mount accessories.
 Tighten the screw with the help of allen
key to secure the Mitchell plate.
 Insert provided screw into the Mitchell plate, Place the bush onto the Mitchell plate as shown
Note: Similarly loosen the allen bolts and remove the female euro.

10
NOTE: Follow same steps as for 150mm
bowl.
(SHOWN WITH OPTIONAL ACCESSORIES)
YOUR PROAIM COSMO SLIDER
ALL DRESSED UP AND READY TO GO
WARRANTY
We oer a one year warranty for our products from the date of purchase.
We will repair or replace your product, free of charge, in the event of a defect in materials or
crasmanship obtained during normal use or handling based on the user manual. Please note
that we will not cover any shipping costs for returning the product to us. If any VAT or import
dues are applied to the return, we will also charge these costs to the customer.

11
The warranty does not include, by the way of example, damage caused by products that we do
not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product ,
or service by anyone other than our company.
We are not liable for incidental or consequenal damages resulng from the use of the unit or
occurring due to any breach of this warranty.
Replacement parts of the product will be provided at nominal cost (covering the cost price of the
replacement parts only) to the customers aer the Warranty Period has expired. We will cover
the complete cost of sending replacement parts within the warranty period. Aer that, Nominal
cost of the product & Actual shipping cost will be charged.
Do not send the unit to us without rst geng a response and geng the approval to send back
the item.
In case of any kind of dissasfacon, we urge you to Contact us immediately and we shall do our
Best to help you out. For any other assistance you can reach us via email.
For any other assistance you can reach us via email.