Snotty TOO Manual

1
INFORMATION SHEET #013
Trouble Shooting Chart – SNOTTY TOO
The below chart has been created to streamline trouble shooting procedures and enable
better understanding of the functionality of SNOTTY TOO.
PROBLEM CAUSE REMEDY
Flat Battery Replace
batteries
Wet Battery Dry for 24h.
* Note SNOTTY
TOO is not water
proof
1. Aspirator not starting
Batteries installed
incorrectly
Install batteries
properly
Aspirator has not been
cleaned properly
Clean aspirator as
per user manual
2. Low suction
at collar tap (6)
If cleaned as per above
and still not working
Return for
warranty
assessment
Base plate not attched
properly
Twist plate until
lines align on top
of aspirator
3. Low suction
(at base plate side hole)
Small o-ring not sealing Adjust or
replace small
o-ring (11)
If nozzle is REMOVED
and suction is same
strength as at base plate
side hole
The aspirator is
functional. The
small hole size
at tip of nozzle
reduces the
suction
sensation.
4. Low suction
(at collection cup tip –
WITH or WITHOUT
silicone tip)
If nozzle is REMOVED
and there is NO suction
Check or replace
o-ring (3)

2
Part Names
1. Silicone Tips 8. ON-OFF button
2. Collection cup 9. Aspirator Body
3. Base o-ring 10. Battery Cover
4. Knob
5. Base Plate
6. Collar Tap
7. Aspirator Collar
11. Small o-ring
Note the important locations of the o-rings:
3. Base o-ring
The base o-ring (3) is the part of the aspirator mostly susceptible to leakage through
damage or inappropriate assembly.
Crucial assembly points are:
1. That base plate (5) is fully locked locked onto the collar tap (6) by turning clockwise to align top lines
2. That small o-ring (11) AND base o-ring (3) are not damaged
3. That the collection cup (2) is FULLY locked by twisting collection cup counter-clockwise
While the aspirator, or o-ring, is new you may have difficulties twisting the collection cup
sufficiently, please lube the o-ring with water to ease the assembly.
OTHER
Please refer to user manual for additional information and care instructions.
11. Small o-ring
Parts Description
3. Base o-ring
2. Collection Cup
4. Knob
10. Battery
Cover
5. Base Plate
6. Collar Tap
7. Aspirator Collar
9. Aspirator Body
open
1. Silicone Tips
11. Small o-ring