SNOWJOE Sunjoe PJ3600C User manual

© 2019 by Snow Joe®, LLC
All rights reserved. Original instructions. SAVE THESE INSTRUCTIONS
1
A Division of Snow Joe®, LLC
OPERATOR’S MANUAL
Model PJ3600C Form No. SJ-PJ3600C-880E-MR3
R
3.6 V | RECHARGEABLE
CORDLESS PRUNER
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Always follow these safety guidelines. Failure to do so may
result in serious bodily injury or death.
General Safety WARNINGS!
Notice the personal safety alert symbol m used in this manual
to draw your attention to a WARNING given along with the
particular operating instruction. This means that the operation
requires special ATTENTION, CAUTION, and AWARENESS.
When using this power tool, basic safety precautions,
including the following, should always be followed to reduce
the risk of re, electric shock, personal injury and material
damage.
mWARNING! This unit can be dangerous! Careless or
improper use can cause serious injury.
mWARNING! The cutting blades can cut you. Keep hands
and feet away from the blades and the cutting area.
Retain this manual for future reference and reread it at the start
of each trimming season.
mWARNING! This battery-operated power tool must be
recharged only with the specic charging unit for the battery.
A charging unit that may be suitable for one type of battery
may create a risk of re when used with another battery type.
• Avoid accidental starting.
• When the tool is not in use, keep it away from other metal
objects.
• Before operating the tool, read the entire manual carefully
and make sure you know how to switch the tool OFF in an
emergency.
Work Area Safety
1. Keep work area clean and well lit. Cluttered and dark
areas invite accidents.
2. Do not operate power tools in explosive atmospheres,
such as in the presence of ammable liquids, gases or
dust. Power tools create sparks which may ignite the dust
or fumes.
3. Keep bystanders and children away. All bystanders,
including children and pets, should be kept a safe
distance away from the work area.
4. Avoid dangerous environment. Don't use the appliance
in wet or damp location.
Electrical Safety
1. If the battery charger cable is damaged, please call the
Snow Joe®+ Sun Joe®customer service center at
1-866-SNOWJOE (1-866-766-9563).
2. If charging the power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected power supply. The using of an RCD reduces the
risk of electric shock.
3. Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any earthed (grounded)
power tools or battery chargers. Unmodied plugs and
matching outlets will reduce risk of electric shock.
4. Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is
earthed or grounded.
5. Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
6. Do not abuse the charging cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
7. Battery charger is for indoor use only. Only charge this
battery-powered tool indoors.
Personal Safety
1. Stay alert. Watch what you are doing and use common
sense when operating a power tool. Do not use the
power tool while you are tired or under the inuence of
drugs, alcohol or medication. A moment of inattention
while operating power tool may result in serious personal
injury.
2. Use personal protective equipment. Always wear eye
protection. Protective equipment such as safety glasses,
a dusk mask, non-skid safety shoes, a hard hat,
and hearing protection, when used for appropriate
conditions, will reduce the possibility of personal injuries.

2
3. Avoid unintentional starting. Ensure the switch is in the
OFF position before connecting to the power source/
battery charger, or before picking up or carrying the tool.
Carrying power tools with your nger on the switch or
charging power tools with the switch ON can lead to
accidents.
4. Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
5. Dress properly. Do not wear loose clothing or jewelry.
Dangling articles such as these can become caught in
moving parts. Using work gloves and substantial footwear
is recommended when working outdoors. Wear
a protective hair covering to contain long hair.
6. If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of these devices can
reduce dust related hazards.
Power Tool Use and Care
1. Do not force the appliance. It will do the job better with
less likelihood of injury if it is used at the rate for which it
was designed.
2. Use the right appliance. Do not use the appliance for any
job except that for which it is intended.
3. Do not use the power tool if the switch does not turn
it on and o. Any power tool that cannot be controlled by
the switch is dangerous and must be repaired.
4. Disconnect the battery pack from the power tool
before making any adjustments, changing accessories
or storing the power tool. Such preventative safety
measures reduce the risk of starting the power tool
accidentally.
5. Store idle appliances indoors. When not in use,
appliances should be stored indoors in a dry and high or
locked-up place out of the reach of children.
6. Maintain appliance with care. Check for misalignment or
binding of moving parts, breakage of parts and any other
condition that may aect the power tool's operation.
If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power
tools.
7. Keep cutting blades sharp and clean. Properly
maintained cutting blades with sharp edges are less likely
to bind and are easier to control.
8. Use the power tool and accessories in accordance
with these instructions and in the manner intended
for the particular use of the power tool, taking into
account the working conditions and the work to be
performed. Using the power tool for operations dierent
from those intended could result in a hazardous situation.
9. Keep all parts of the body away from the cutting blade.
Do not remove cut material or hold material to be cut
when blades are moving. Make sure the switch is o when
clearing jammed material. A moment of inattention while
operating the product may result in serious personal injury.
10. Carry the product by the handle with the cutting blade
stopped. When transporting or storing the product always
t the cutting device cover. Proper handling of the product
will reduce possible personal injury from the cutter blades.
Service
1. If your power tool requires service, contact an
authorized Snow Joe®+ Sun Joe®dealer or call the
Snow Joe®+ Sun Joe®customer service center at
1-866-SNOWJOE (1-866-766-9563). Only identical
replacement parts should be utilized for repairs. This will
ensure that the safety of the power tool is maintained.
2. If the battery charger cable is damaged, it must be
immediately replaced to avoid a hazard.
Contact the Snow Joe®+ Sun Joe®customer service
center at 1-866-SNOWJOE (1-866-766-9563) for
assistance.
Battery Safety Warnings
This manual contains important safety and operating
instructions for your battery and charger.
1. Before using, always check the charger, cable and
plug. If defects are detected, do not use the charger;
never open the charger. Thoroughly read all instructions
and cautionary markings on the manual, the charger,
and the cordless pruner.
mWARNING! If the cordless pruner housing is cracked or
damaged, do not insert the charging adapter into the power
tool or plug the power tool into the mains outlet. There is a
danger of electric shock or electrocution.
2. Protect the battery charger from rain and moisture.
Water penetration in a battery charger increases the risk
of electric shock.
3. Only use the included battery for this unit.
4. Do not open or modify the battery. Release electrolyte is
corrosive and may cause damage to eyes and skin.
It may be toxic if swallowed.
5. Keep the battery charger clean. Contamination may
increase the risk of electric shock.
6. Do not short circuit. A battery pack will short circuit if a
metal object makes a connection between the positive
and negative contacts on the battery pack. Do not place a
battery pack near anything that may cause a short circuit,
such as paper clips, coins, keys, screws, nails and other
metallic objects. A short-circuited battery pack poses a
risk of re and severe personal injury.
7. This charger is ONLY intended to charge the rechargeable
battery inside of the cordless pruner. Any other use poses
a risk of re, electric shock or electrocution.
8. Do not place any object on top of the charger or place
the charger on a soft surface that may result in excessive
internal heat. Keep the charger away from any heat
source.
9. To reduce the risk of damaging the electric plug and
cord, pull the plug, not the cord, when disconnecting the
charger from the electric outlet.

3
10. Make sure the battery charging cable is located in a safe
place so that it will not be stepped on, tripped over or
otherwise subjected to damage or stress.
11. An extension cord should not be used unless absolutely
necessary. Using an improper extension cord poses a risk
of re, electric shock or electrocution.
12. Do not operate the charger if it has received a sharp
blow or has become damaged in any way. Contact
the Snow Joe®+ Sun Joe®customer service center at
1-866-SNOWJOE (1-866-766-9563) before continuing
use.
13. Do not disassemble the charger. Incorrect reassembly
may pose a serious risk of electric shock, re or exposure
to toxic battery chemicals. If the battery or charger are
damaged, contact an authorized Snow Joe®+
Sun Joe®dealer or call the Snow Joe®+ Sun Joe®
customer service center at 1-866-SNOWJOE
(1-866-766-9563) for assistance.
14. To reduce the risk of electric shock, unplug the charger
from the outlet before cleaning the unit.
15. Never attempt to connect two (2) chargers together.
16. DO NOT store or use the tool and the charger in locations
where the temperature may reach or exceed
104 ºF (40 ºC). Dangerous storing locations include
outdoor sheds or metal buildings in the summer.
17. The charger is designed to operate on standard household
electrical power (120 V). Do not attempt to use it with any
other voltage!
NOTE: The integrated battery is not fully charged out of
the carton. Read the safety instructions and then follow
the charging notes and procedures.
18. The longest life and best performance can be obtained if
the integrated battery is charged when the air temperature
is between 64.4 ºF – 75.2 ºF (18 ºC – 24 ºC). Do not
charge the battery pack when the air temperature falls
below 50 ºF (10 ºC) or above 104 ºF (40 ºC). Following
these safety measures will prevent damage to the battery
pack.
19. Do not incinerate the integrated battery even if it is
seriously damaged or completely worn out. The battery
can explode in a re.

4
Safety Symbols
The following table depicts and describes safety symbols that may appear on this product. Read, understand and follow all
instructions on this tool before attempting to assemble and operate.
READ THE OPERATOR'S
MANUAL(S) – Read, understand
and follow all instructions in the
user manual(s) before attempting
to assemble and operate.
SAFETY ALERT – Indicates a
precaution, a warning or a danger.
WARNING! Do not expose the
unit to rain or wet conditions.
Keep dry.
Symbols SymbolsDescriptions Descriptions
Thrown objects and moving blade
can cause severe injury.
Only use battery charger indoors.
Battery charger contains a
safety transformer.
Risk of Injury. Use safety
glasses, hearing protection
and dust mask.
Keep bystanders a safe distance
away from the work area.
Wear protective gloves and
non-slip footwear when using
the machine and handling debris.
DANGER! Keep hands away from
blade.

5
Know Your Cordless Pruner
Read the owner’s manual and safety instructions carefully before operating cordless pruner. Compare the illustration below to
the cordless pruner in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for
future reference.
1. Blade cover
2. Blade lock knob
3. Machine housing
4. Handle
5. Safety lock button
6. On/O switch
7. LED light (2)
8. Blade lock bolt
9. Removable blade
10. Fixed blade
11. AC charger
12. Charging socket
13. Charging indicator
1
2
34
5
6
7
The other side
8
9
10
End of the handle
13 12
11
Technical Data
Motor................................................................... 40 W
Charger Output ................................................... 5.4 V 1.8 A
Battery Voltage*................................................... 3.6 V
Battery Capacity.................................................. 2000 mAh
Battery Type ........................................................ Lithium-ion
Battery Runtime Max .......................................... 30 min
Cutting Diameter Max ......................................... 0.5 in. (1.2 cm)
Cutting Speed .............................................≤ 0.6 s
Cutting Times Max ......................................750 cuts per charge
(based on 9 mm
soft wood cuts)
Charging Time .............................................65 min
Weight .........................................................1.4 lbs (0.6 kg)
*Initial no-load voltage, when fully charged, peaks at 4.2 volts; nominal voltage under typical load is 3.6 volts.

6
Unpacking
Carton Contents
• Cordless pruner
• Blade cover
• Charger
• Manual with registration card
1. Carefully remove the cordless pruner and check to see
that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you nd damaged or
missing parts, DO NOT return the unit to the store.
Please call the Snow Joe®+ Sun Joe®customer service
center at 1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new cordless
pruner. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags,
foils or small parts. These items can be swallowed and pose
a suocation risk!
Assembly
This cordless pruner comes completely assembled with the
blade pre-installed.
mCAUTION! Wear protective gloves before handling the
blade.
mWARNING! Make sure the unit is powered o before
handling the blade.
Fitting and Changing the Blade
mWARNING! Use only recommended replacement blade.
NOTE: Cutting will become dicult when the blade edge has
become dull, at which time you should change the blade.
mWARNING! Make sure that the pruner is o and always
wear protective gloves while changing the blade.
mWARNING! Risk of injury; keep hands away from the
switches when changing the blade.
1. Rotate the blade lock knob clockwise to unlock (Fig. 1).
2. Wearing gloves, grasp the removable blade and pull it
from the pruner to remove it (Fig. 2).
3. Insert the new blade into position, and listen for the
audible "click" that indicates that the blade is xed in
place.
4. Lock the blade lock knob by turning it counter-closewise,
and listen for the audible "click" that indicates the knob is
locked in position (Fig. 3).
Fig. 1
Blade lock knob
Fig. 2
Removable blade
Fig. 3

7
Before Using
Charging Procedure
The battery charger supplied matches the lithium-ion battery
installed in the tool. Do not use other battery chargers.
The lithium-ion battery is protected against deep discharging.
When the battery is empty, a protective circuit will
automatically switch OFF the machine. The blade will no
longer move.
Charge the battery up to 65 minutes then use it until it runs
down (i.e. the tools starts to operate slowly). Recharge for
up to 65 minutes again before resuming operation.
mWARNING! Continued and excessive overuse of the
ON/OFF trigger switch can permanently damage the lithium-
ion battery.
mCAUTION! This charger does not automatically turn
o when the battery is fully charged. Please take care not
to leave the pruner plugged into the charger.
Switch o or unplug the charger at the mains when
charging is complete.
NOTE: The charge level indicator LED light will illuminate red
when the charger is plugged in and is charging the cordless
pruner. The LED light will turn green when the pruner is fully
charged.
The charging process starts as soon as the charger is plugged
into both the proper electrical outlet and the tool.
• During the charging procedure, the handle and the housing
of the tool will feel slightly warm to the touch. This is
normal.
• When no further use is planned for an extended period of
time, disconnect the battery charger from the outlet and the
unit.
• Do not use the tool during the charging procedure.
Battery Charging
The length of service between each charging varies depending
on the type of work you are doing. The battery in this pruner
has been designed to provide maximum trouble-free life.
However, like all batteries, it will eventually wear out. To obtain
the longest possible battery life, we suggest the following:
• Store and charge your cordless pruner in a cool area.
Temperatures above or below normal room temperature
will shorten battery life.
• Never store the cordless pruner with the battery in a
discharged condition. Recharge the unit immediately after
it is discharged.
• All batteries gradually lose their charge. The higher the
temperature is, the faster they lose their charge. If you
store your cordless pruner for long periods of time without
using it, recharge the battery every 6 months. This will
extend battery life.
NOTE: The cordless pruner has been shipped in a low charge
condition and should be fully charged before use.
1. Plug the charger adapter into an appropriate AC power
outlet. Connect the AC adapter charger plug into the
charging socket of the cordless pruner to start charging
(Fig. 4).
2. The LED charging indicator will illuminate red during
charging. After the unit is fully charged, the charging
indicator will turn green (Fig. 5).
3. The battery will take approximately 65 minutes to charge.
Charging time may vary due to the level of charge left in
the battery and the ambient temperature.
Operation
IMPORTANT! The product is intended for light-duty pruning of
shrubs and hedges for residential properties.
NOTE: Charge the battery up to 65 minutes then use it until it
runs down (i.e. the tool will only slowly operate). Recharge for
up to 65 minutes again before resuming operation.
mWARNING! The blades continue to move for a few
seconds after the tool is switched OFF. Turn OFF the tool and
wait until the blades come to a complete stop before adjusting
or cleaning.
Fig. 4
Charging socket
Charger adapter
Fig. 5 Charging
indicator

8
mCAUTION! Wear protective gloves while working with
the pruner. Never touch the blade or blade rail while the tool is
in operation and be aware of the sharp edges even when the
pruner is not in use.
Starting + Stopping
1. To power ON, push and hold the safety lock button with
your ngers, while pressing the On/O trigger switch with
your index nger. Once the On/O switch is pressed,
the removable blade will move down and the two blades
will close to cut (Fig. 6).
NOTE: The safety lock button reduces the risk of accidental
starting.
2. Release the On/O switch, the two blades will open
(Fig. 6).
mCAUTION! Always ensure proper footing and balance
in a clean and clear work environment before switching on the
cordless pruner.
NOTE: The pruner will stop working when the voltage is lower
than 3 Volts. Please recharge as soon as possible if the pruner
stops working.
LED lights
The pruner is equipped with two LED lights under the blades
on both sides to provide additional lighting for operation in low
light conditions. The LED lights will turned on when the safety
lock button is pressed and turn o when the safety lock button
is released (Fig. 7).
Trimming Tips
The cordless pruner can be used to remove fresh blooms
from the garden; also great for pruning overgrowth, dead and
overlapping stems and twigs, as well as thin and weak growth.
Follow the tips below for operation.
1. Never cut too close to the bud, so the wound can heal
properly.
2. Always make the cut above 0.3 inch (8 mm) from the bud
(Fig. 8).
3. The cut should slope away from the bud, so the rain can
run o (Fig. 9).
4. When removing the entire stem, cut back to the point
where it branched (Fig. 10).
Fig. 6
Safety lock button
On/O switch
Fig. 7
Front BackLED lights
Fig. 8
Bud
0.3 inch (8 mm)
Fig. 9
Fig. 10

9
5. Cut branches one by one, as shown (Fig. 11).
Maintenance
mWARNING! Always switch the product o and let the
product cool down before performing inspection, maintenance,
and cleaning work.
1. If the cordless pruner requires cleaning, do not use
solvents to clean it. Only use a moistened soft cloth.
Never let any liquid get inside the tool; and never immerse
any part of the tool into any liquid.
2. Apply oil around the center bolt and open and close the
tool about 10 times to work it in. Use the steel wool to
rub the oil over the cutting surfaces. Spray the tool with
alcohol and wipe with a paper towel.
3. Inspect the product before each use for worn and
damaged parts. Do not operate it if you nd broken and
worn parts.
Blade Maintenance
To ensure years of ecient and trouble-free operation,
blade cleaning should be performed if sap and debris have
built-up, or if you live in an area where the soil is sandy.
Cleaning unusually heavy deposits may require removal of the
blade.
NOTE: Snow Joe®+ Sun Joe®will not be held responsible for
any damage or injuries caused by repair of the pruner by an
unauthorized person or by mishandling of the trimmer.
1. Keep the cutting blades clean and free of debris.
Remove trimmings.
2. Keep the blades sharp. Have a worn or damaged cutting
device replaced with a new one of the same type by a
qualied specialist. Spare parts may be ordered online at
sunjoe.com or via phone by contacting the Snow Joe®+
Sun Joe®customer service center at 1-866-SNOWJOE
(1-866-766-9563).
3. To replace the blade, see page 6 for instructions.
Blade Sharpening
mWARNING! Always take extra care, especially when
your hand may be facing the cutting edge.
Bypass pruners will generally only have one blade, the lower
part being the counter blade which should never require
sharpening.
The cut of a bypass tool is achieved by the blade precisely
passing by the counter blade. It therefore follows that you
should never sharpen the at side of the blade. If steel is
removed from here, the two parts will no longer meet precisely
and the tool will fail to cut. You must only sharpen on the
outside or bevelled side of the blade.
1. To sharpen your cordless pruner, hold the open pruner at
in one hand and with the other hand place the sharpener
at a 15 degree angle along the bevelled side of the blade
(Fig. 12).
NOTE: Be careful to not sharpen at too steep an angle as
this could damage the edge of the blade.
2. Move the sharpener in one direction only, with smooth
strokes from base to end 4 to 5 times.
mWARNING! Do not over-sharpen. Be sure to test blades
repeatedly throughout the sharpening process to prevent over-
sharpening.
3. Turn the pruner over so the at side of the blade is facing
up and slide the sharpener ush along the unbeveled edge
to remove burrs created by sharpening the cutting blade.
4. A bench vise can also be used to hold the tool during
sharpening, taking care not to over tighten the vise which
can bend the tool.
mWARNING! Minimize coating loss. Stay to the edge of
the blade when sharpening blades with low-friction or titanium
coating to minimize the loss of coating.
1
2
3
Fig. 11
Fig. 12 Blade
Counter
blade
Diamond le

10
Storage
When the tool will not be used for several months, proceed as
follows:
• Fully charge the battery.
• Clean the product as describe above.
• Make sure that the blade lock knob is in the lock position,
then assemble the blade cover over the blades (Fig. 13).
• Store the tool in a secure and dry location. The storage
temperature must always remains in the range of
41°F (5°C) to 104°F (40°C).
• Before using the tool after prolonged storage,
fully recharge the battery.
Battery Caution + Disposal
Always dispose of your battery pack according to federal,
state, and local regulations. Contact a recycling agency in your
area for recycling locations.
mCAUTION! Even discharged battery packs contain
some energy. Before disposing, use electrical tape to cover the
terminals to prevent the battery pack from shorting,
which could cause a re or explosion.
mWARNING! To reduce the risk of injury or explosion,
never burn or incinerate a battery pack even if it is damaged,
dead, or completely discharged. When burned, toxic fumes
and materials are emitted into the surrounding atmosphere.
1. Batteries vary according to device. Consult your manual
for specic information.
2. Install only new batteries of the same type in your product
(where applicable).
3. Failure to insert batteries in the correct polarity, as
indicated in the battery compartment or manual, may
shorten the life of the batteries or cause batteries to leak.
4. Do not mix old and new batteries.
5. Do not mix Alkaline, Standard (Carbon-Zinc),
or Rechargeable (Nickel Cadmium, Nickel Metal Hydride,
or Lithium-Ion) batteries.
6. Do not dispose of batteries in re. The cell of the battery
may explode.
7. Batteries should be recycled or disposed of as per state
and local guidelines.
Service + Support
If your Sun Joe®cordless pruner requires service or
maintenance, please call the Snow Joe®+ Sun Joe®customer
service center at 1-866-SNOWJOE (1-866-766-9563).
Model + Serial Numbers
When contacting the company or reordering parts, you will
need to provide the model and serial numbers of your product.
These are found on the decal axed to the housing or handle
of your cordless pruner. Copy these numbers into the space
provided below.
Fig. 13
Blade cover
Record the following numbers from the housing or handle of your
new product: Model #:
Serial #:
P J 3 6 0 0 C

11
PJ3600C-CHRG
Federal Communications Commission
(FCC)
mWARNING! Any changes or modications to this
unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the
equipment.
Class B device:
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur
in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.

12
Optional Accessories
mWARNING! ALWAYS use only authorized Snow Joe®+ Sun Joe®replacement parts and accessories. NEVER use
replacement parts or accessories that are not intended for use with this cordless pruner. Contact Snow Joe®+ Sun Joe®if you
are unsure whether it is safe to use a particular replacement part or accessory with your cordless pruner. The use of any other
attachment or accessory can be dangerous and could cause injury or mechanical damage.
NOTE: Accessories are subject to change without any obligation on the part of Snow Joe®+ Sun Joe®to provide notice of such
changes. Accessories can be ordered online at sunjoe.com or via phone by contacting the Snow Joe®+ Sun Joe®customer
service center at 1-866-SNOWJOE (1-866-766-9563).
AC Charging Adapter
Replacement blade
PJ3600C-CHRG
PJ3600C-BLD
ModelAccessories Item
1
2

13
NOTES

14
NOTES

15
SNOW JOE®+ SUN JOE®CUSTOMER PROMISE
PRODUCT REGISTRATION:
Snow Joe®, LLC (“Snow Joe®+ Sun Joe®”) strongly encourages
you to register your purchase. You can register online at
snowjoe.com/ProductRegistration, or by printing and mailing
in a registration card available online from our website, or
calling our Customer Service Department at 1-866-SNOWJOE
(1-866-766-9563), or by e-mailing us at [email protected].
Failure to register your product purchase will not diminish your
warranty rights. However, registering your purchase will allow
Snow Joe®+ Sun Joe®to better serve you with any of your
customer service needs.
WHO CAN SEEK WARRANTY COVERAGE?
This Warranty is extended by Snow Joe®+ Sun Joe®to the owner
of this Machine (a “Machine” consists of a product powered by
a motor) for residential and personal household use only. This
Warranty does not apply to products used for commercial, rental
or re-sale purposes. Should ownership of this machine change
during the 2-year period, please update the Machine’s owner
information at snowjoe.com/ProductRegistration.
WHAT IS COVERED?
Snow Joe®+ Sun Joe®warrants to the owner that if this Machine
fails within 2 years from the date of purchase due to a defect in
material or workmanship or as a result of normal wear and tear
from ordinary household use, Snow Joe®+ Sun Joe®will send a
replacement part or product, as needed, free of charge and with
free shipping to the original purchaser.
If, in Snow Joe®+ Sun Joe®’s sole discretion, the failed Machine
cannot be repaired with a part, Snow Joe®+ Sun Joe®will elect to
either (A) send a new Machine at no charge and with free shipping
or (B) refund the full purchase price to the owner.
WHAT IS NOT COVERED?
This Warranty does not apply to the Machines that have been used
commercially or in non-household applications. This Warranty
does not cover cosmetic changes that do not aect performance.
This Warranty is only valid if the Machine is used and maintained
in accordance with the instructions, warnings and safeguards
contained in the owner’s manual. Snow Joe®+ Sun Joe®will not
be responsible for the cost of any unauthorized warranty repairs.
This warranty does not cover any cost or expense incurred by
the purchaser in providing substitute equipment or service during
reasonable periods of malfunction or non-use of this product
while waiting for a replacement part or unit under this warranty.
Wearing parts like belts, augers, chains and tines are not covered
under this warranty, and can be purchased at snowjoe.com or
by calling 1-866-SNOWJOE (1-866-766-9563). Batteries are
covered in full for 90-days from the date of purchase.
Repair, replacement or refund of the purchase price are the
exclusive remedies of purchaser and the sole liability of Snow Joe®
+ Sun Joe®under this warranty. No employee or representative
of Snow Joe®+ Sun Joe®is authorized to make any additional
warranty or any modication to this warranty which may be
binding upon Snow Joe®+ Sun Joe®. Accordingly, purchaser
should not rely upon any additional statements made by any
employee or representative of Snow Joe®+ Sun Joe®. In no event,
whether based on contract, indemnity, warranty, tort (including
negligence), strict liability or otherwise, shall Snow Joe®+
Sun Joe®be liable for any special, indirect, incidental, or
consequential damages, including, without limitation, loss of
prot or revenue.
Some states do not allow limits on warranties. In such states, the
above limitations may not apply to you.
Outside the USA, other warranties may apply.
ABOVE ALL ELSE, Snow Joe®+ Sun Joe®are dedicated to you, our customer. We strive to make your experience as pleasant
as possible. Unfortunately, there are times when a product does not work or breaks under normal operating conditions. We
think it’s important that you know what you can expect from us. That’s why we created the Snow Joe®+ Sun Joe®promise.
OUR PROMISE: Snow Joe®+ Sun Joe®warrant new products for two years from the date of purchase. If your product does
not work, or there’s an issue with a specic part, we will x this by either sending you a free replacement part or by sending
you a new or comparable product at no charge. How cool is that! Before you know it, you’ll be back in action cutting,
sawing, mowing, washing and…?

sunjoe.com