Snugpak JOURNEY TRIO User manual

JOURNEY TRIO
THREE PERSON TENT
Assembly Instructions
1Orange Tipped Pole
2Silver Tipped Poles
14 Alloy Stakes
Lay out the footprint before
erecting the tent.
Unroll the inner tent and locate
the pole bag, separate the poles,
clip the sections together making
continuous poles. The poles are
held together by elastic.
Pole Placement
1. Clip the inner tent to the
silver tipped pole with the
black plastic clips.
2.Clip the inner tent to the
other silver tipped pole
with the black plastic
clips.
3.Insert the pole ends
into the grommets in the
corresponding webbing
straps.
4. Clip the two silver tipped
poles together with the
large clip on hook.
5. When all the pole ends are
inserted into the grommets
take the ultralight alloy
stakes included with
the Journey Trio, stake
down the corners with
the webbing straps. Add
additional stakes to other
stake points as required.
6. At this stage the Journey
Trio can be used as a stand
alone insect shelter, if so
desired.
5
5
1
3
4

JOURNEY TRIO
THREE PERSON TENT
Assembly Instructions
Snugpak®products are exclusively
distributed in North & South America by:
Proforce Equipment, Inc.
3230 Executive Way - Miramar, FL 33025
Ph: 305.436.7984 / 800.259.5962
www.ProforceEquipment.com
www.SNUGPAKUSA.com
7. Take out the fly (Outer Tent)unfold and lay out.
Drape the fly over the main body matching up the door
and foot area, connect the two with the velcro loops.
8. When the inner tent is connected with the fly,
click all the side release buckles together.
9. Insert the orange tipped pole into the orange
trimmed edging
10. To gain access unzip the fly and inner tent zips.
11. When happy with the set-up, further stabilisation
is achieved by pegging out the guy lines. This is
essential in windy conditions.
8
7
THIS TENT MEETS THE FLAMMABILITY REQUIREMENTS OF ISO6941 / (EN5912).
8
9