Snugpak JOURNEY DUO User manual

JOURNEY DUO
TWO PERSON TENT
Assembly Instructions
Lay out the footprint before
erecting the tent.
Unroll the inner tent, locate
the pole bag, separate the poles,
clip the sections together making
continuous poles. The poles are
held together by elastic.
Pole Placement
1. Insert the silver tipped
straight pole with silver
section to black trim
edging.
2.Insert the other silver
tipped straight pole with
silver section to silver
trim edging.
3.Clip the inner tent to the
orange tipped pole with the
black plastic clips.
4.Insert the pole ends
into the grommets in the
corresponding webbing
straps.
5.Clip the inner tent to the
silver tipped pole with the
black plastic clips.
6. When all the pole ends are
inserted into the grommets
take the ultralight alloy
stakes included with
the Journey Duo, stake
down the corners with
the webbing straps. Add
additional stakes to other
stake points as required.
7. At this stage the
Journey Duo can be used
as a stand-alone insect
shelter.
2Straight Silver
Tipped Poles
1Angled Orange
Tipped Pole 18 Alloy Stakes
2
5
3
6
31
4

Assembly Instructions
Snugpak®products are exclusively
distributed in North & South America by:
Proforce Equipment, Inc.
3230 Executive Way - Miramar, FL 33025
Ph: 305.436.7984 / 800.259.5962
www.ProforceEquipment.com
www.SNUGPAKUSA.com
8.Take out the fly (Outer Tent)unfold and lay out.
Drape the fly over the main body matching up the
door and foot area and connect the two with the
velcro loops.
9. When the inner tent is connected with the fly click
all the side release buckles together.
10. To gain access unzip the fly and inner tent zips.
11. When happy with the set-up, further stabilisation
is achieved by pegging out the guy lines. This is
essential in windy conditions.
JOURNEY DUO
TWO PERSON TENT
THIS TENT MEETS THE FLAMMABILITY REQUIREMENTS OF ISO6941 / (EN5912).
10
9
9
8