Snuza Hero MD User manual
English
INSTRUCTION MANUAL
READ INSTRUCTIONS IN FULL BEFORE USE
PHMD00903
English
Important: This portable baby breathing monitor
may not be able to detect all life-threatening
events.
SNUZA is a registered trademark of
Snuza International (Pty) Ltd
Unit 11 Roeland Square
Roeland Street
Cape Town 8001
South Africa
Made in South Africa
Patented
Patent nos:
2,677,990 | 2008212520 | EP 548789-2009| 200300 | 2124748/08709966.9| 2124748 |
MX/a/8,461,996 | 2359364 | 05652/2009 | 2,009,134,887 | 578560 | 008469/2009
English
1. IMPORTANT – READ FIRST! ...................................................................................................... 1.
5. Quick Start Guide ............................................................................................................................. 6.
9.2 Rouse Warning ............................................................................................................... 11.
8.1 Startup ................................................................................................................................ 8.
10.2 Battery Life .................................................................................................................. 12.
3. Precautions and Contra-indications ....................................................................................... 4.
7. Fitting your HeroMD (Medical Device) ................................................................................... 7.
10. Battery ................................................................................................................................................ 12.
8.3 Clothing .............................................................................................................................. 10.
11. Maintenance .................................................................................................................................... 14.
12. Troubleshooting ............................................................................................................................. 14.
13. Disclaimer ......................................................................................................................................... 14.
15. Technical Description .................................................................................................................. 15.
14. Guarantee ......................................................................................................................................... 15.
2. Introduction .......................................................................................................................................... 3.
6. Diaper (Nappy) Fitment ................................................................................................................. 7.
9.3 Movement-Rate Warning .......................................................................................... 11.
8.2 Monitoring ......................................................................................................................... 9.
10.3 Replacing the Battery .............................................................................................. 12.
47HY[Z0KLU[PÄJH[PVU ........................................................................................................................... 5.
9.1 Audible Tick ..................................................................................................................... 11.
8. Operation ............................................................................................................................................... 8.
10.1 Battery Indicator ....................................................................................................... 12.
9. Settings ................................................................................................................................................. 11.
11.1 Disposal .......................................................................................................................... 14.
11.2 Cleaning and Storage .............................................................................................. 14.
CONTENTS
English
1. IMPORTANT – READ FIRST!
It is essential that HeroMD»ZJVSV\YLKÅL_PISL[PWJVU[HPUPUN[OLIYLH[OPUN
sensor maintains constant contact with baby’s tummy.
ALWAYS:
Use the correct size diaper (nappy). If it is too loose,
HeroMD may lose contact.
Fold the top of the diaper over before attaching
HeroMD[VLUZ\YLHÄYTNYPW<ZL[OLKPHWLYHKQ\Z[LYZ
[VWYV]PKLHZU\NÄ[HYV\UK[OL[\TT`
Firmly clip HeroMDVU[V[OLMVSKLKKPHWLY^HPZ[IHUK\ZPUN[OLM\SSL_[LU[VM[OL
clip.
Page 1
English
Ensure that HeroMD sits squarely on the diaper,
and that the Breathing Sensor (1) is in contact with
baby’s tummy.
Press the ON/OFF button (6) to start monitoring.
Always follow the above procedure to ensure that
your baby’s breathing is being monitored, and to
prevent false alarms caused by lack of contact with
baby’s tummy.
NOTE:
Handle HeroMD with care to prevent damage to clip or sensor.
Page 2
English
2. Introduction
Intended user:
This equipment is intended to be operated by the baby’s caregiver. The caregiver
must have a good understanding of the instructions and safety measures
contained in the user manual.
Usage environment:
Home Safety
HeroMD safely and conveniently monitors your baby›s breathing movement
while sleeping to provide an early intervention opportunity in the event of any
interruption in baby’s breathing.
HeroMD should be clipped onto your baby›s diaper (nappy) for total portability. No
JVYKZ^PYLZZLUZVYWHKZÅH[Z\YMHJLVYL_[LYUHSWV^LYHYLYLX\PYLK
*SPWVUZ^P[JOVUHUKL_WLYPLUJLWLHJLVMTPUK
HeroMD detects even the slightest abdominal movement and will alert you if your
baby’s breathing rate falls to less than 8 breaths per minute (this warning can be
disabled), or if no breathing is detected at all for a period of 20 seconds. HeroMD
^PSSÄYZ[]PIYH[LNLU[S`HM[LY15 seconds in an attempt to rouse the baby.
If the vibration succeeds in rousing the baby and breathing is detected after such
an event, on each detected breath the Breathing Indicator Light (3^PSSÅHZOYLK
After three vibration/rouse events, the Rouse Warning will alert you to the fact
that your baby’s breathing movements have stopped for 15 seconds on three
VJJHZPVUZ;OL9V\ZL>HYUPUNPZJOHYHJ[LYPaLKI`HZOVY[ILLWHUKÅHZOPUNVM
the red Breathing Indicator Light (3) every 2 seconds. Monitoring will continue
when the Rouse Warning is active but will require the caregiver to attend to the
IHI`[VPU]LZ[PNH[L;OL9V\ZL>HYUPUNHSHYTJHUILYLZL[I`IYPLÅ`WYLZZPUN
LP[OLY[OL656--VY46+,6--I\[[VUZVYI`[\YUPUN[OLKL]PJLVɈHUK
then back on. The rouse warning feature can be disabled during monitoring by
pressing the MODE/OFF button for 2ZLJVUKZPUKPJH[LKI`HZPUNSLILLWÅHZOPUN
of the red Breathing Indicator Light (3) and Alarm Indicator Light (4). When the
KL]PJLPZ[\YULKVɈHUKVUHNHPU[OLZL[[PUNZYL]LY[[V[OLYV\ZL^HYUPUNMLH[\YL
being enabled.
Intended use:
HeroMD is a breathing monitor for the detection of infant breathing cessation.
Page 3
English
3. Precautions and Contra-indications
This device is not intended to prevent or monitor a disease or condition such as
Obstructive Apnea.
4V]LTLU[MYVTL_[LYUHSZV\YJLZZ\JOHZILPUNW\ZOLKPUHWYHTVY[YH]LSSPUNPU
a vehicle or aircraft may be detected by HeroMD’s sensor. HeroMD should not be
YLSPLK\WVU^OLYLL_[LYUHSZV\YJLZVMTV]LTLU[HYLWYLZLU[
The monitored baby must sleep in his/her own separate bed as the monitor may
detect the breathing or movement of any other person sharing the bed with the
baby, and will not alarm as long as it detects that movement, even if the baby
stops breathing.
Radio transmitters such as cell phones, audio and video baby monitors, cordless
phones, walkie-talkies, wireless routers, etc. may cause interference with the
monitor’s ability to detect breathing or movement. The monitor should not be
placed within 2 meters of other transmitting devices.
5VTVKPÄJH[PVUVM[OPZKL]PJLPZHSSV^LK
A single device should be dedicated for use with one baby only.
Small parts that have become detached for some unlikely reason may result in a
choking hazard.
In case your baby develops skin sensitivity where the device makes contact with
your baby’s skin, refer to section 8.3. Check your baby’s skin for red marks within
an hour of attaching HeroMD. If the skin sensitivity persists, contact us via www.
snuza.com.
Keep out of reach of pets, pests and other children as damage to the device
might cause it to not perform as intended.
Do not insert anything into the Sound Emission Hole (2).
Do not allow any liquid to enter the Sound Emission Hole.
(]VPKILUKPUN[OLIYLH[OPUNZLUZVY\UULJLZZHYPS`ÄN1).
+VUV[\ZL\UK\LMVYJL[VILUK[OLJSPWÄN2).
Do not pull the Battery Cover Release Clip (10) beyond the Guard Rail (11).
Page 4
English
47HY[Z0KLU[PÄJH[PVU
Front
Back
Page 5
English
.5 Quick Start Guide
5.1 0TWVY[HU[!<ZL[OLJVYYLJ[KPHWLYZPaLHUKTHRLZ\YLP[Ä[ZZU\NS`ZLL:LJ[PVU
6 Diaper/Nappy Fitment).
5.2 Do not switch the monitor on when clipped onto your baby’s diaper.
5.3 7SHJL[OLTVUP[VYVUHÅH[Z[H[PVUHY`Z\YMHJL:^P[JOVUI`IYPLÅ`WYLZZPUN
the ON/OFF button (6).
5.4 A start-up test will illuminate the indicator lights, vibrate the stimulator, play 3
audible tones, perform a battery test, and perform a sensor test.
5.5 When the sensor has been tested, a startup tone is heard.
5.6 Clip HeroMD onto the diaper so that the Breathing Sensor (1) is in direct contact
with the baby’s tummy (see Section 7 Fitting your HeroMD).
5.7 The Breathing Indicator Light (3ÅHZOLZVULHJOTV]LTLU[:LL:LJ[PVU8.2
Monitoring for a full description.
5.8 If breathing is not detected for 15 seconds, the vibrating stimulator will
attempt to rouse the baby.
5.9 If breathing resumes within 5 seconds after a vibration, the Breathing Indicator
Light (3^PSSÅHZOYLK[VPUKPJH[L[OH[[OLYLOHZILLUH-15second period of no
breathing.
5.10 After three vibrations, the Rouse Warning is activated – HeroMD beeps every 2
seconds and the Breathing Indicator Light (3ÅHZOLZYLK^P[OL]LY`ILLW
5.11 If the period of no breathing reaches 20 seconds, the full audible alarm will
sound, HeroMD will vibrate and the Alarm Indicator Light (4^PSSÅHZOYLK
5.12 The caregiver must attend to the baby.
5.13 ;OLHSHYTJHUVUS`ILKLHJ[P]H[LKI`Z^P[JOPUN[OLTVUP[VYVɈ
5.14 ;VZ^P[JOVɈ[OLTVUP[VYWYLZZIV[O[OL656--6) and MODE/OFF (7)
buttons simultaneously. A shutdown tone will be heard and monitoring will
stop.
Page 6
English
6. DIAPER/NAPPY FITMENT
7. FITTING YOUR HEROMD
0TWVY[HU[!*VYYLJ[KPHWLYÄ[TLU[PZLZZLU[PHSMVY[OL
operation of HeroMD;OL[OPUÅHWVMTH[LYPHSH[[OL
top of the diaper must be folded over the thicker part
before the diaper is closed (this is the section to which
HeroMD^PSSILH[[HJOLK;OLKPHWLYZOV\SKÄ[ZU\NS`
VU[OLIHI`^P[O[OL[VWVM[OLKPHWLYQ\Z[ILSV^[OL
ILSS`I\[[VU3VVZLÄ[[PUNKPHWLYZ^PSSNHWLJH\ZPUN[OL
monitor to lose contact with the baby and false alarm.
A very ‘full’ or wet diaper may also cause it to gape.
If baby sleeps on his or her side, HeroMD should be
WSHJLKVɈJLU[LYVM[OLUH]LSHUK[OLTH[[YLZZ
When attaching your Snuza
monitor you should put your
ÄUNLYZPUIL[^LLU[OLIHI`»Z
diaper and the baby’s skin. Make
sure that the monitor is clipped
securely onto the diaper and away
from the baby’s skin when clipped
on in order not to harm the baby.
Make sure that the Breathing Sensor (1) is in contact
with the baby’s tummy around the belly button area,
HS[OV\NOJSVZLY[V[OLZPKLZTH`Z\P[KPɈLYLU[ZSLLWPUN
positions.
The World Health Organisation (WHO) recommends that
babies be placed to sleep on their back unless advised
otherwise by a doctor. See http://www.who.int/en/
Ensure that the Battery Cover (9) is secure. Clip your HeroMD all the way onto the
KPHWLY[V[OLM\SSL_[LU[VM[OLJSPWHZZOV^U!
Page 7
English
.8 OPERA TION
Startup
HeroMD must not be switched on while clipped onto your baby’s diaper. The
TVUP[VYT\Z[ILWSHJLKVUHÅH[Z[H[PVUHY`Z\YMHJLK\YPUN[OLZLSM[LZ[
:^P[JOVUI`IYPLÅ`WYLZZPUN[OL656--I\[[VU6).
A startup-test will run which will test all indicator lights, the vibration stimulator,
the audible alarm and the battery level. If a failure of any item is detected, the
Self-Test Failure Alarm will sound and the device cannot be used.
(M[LY[OLIH[[LY`[LZ[[OL)H[[LY`0UKPJH[VY3PNO[^PSSÅHZO3 times with
simultaneous single-tone beep. The colour of the Battery Indicator Light has the
following meaning:
If the battery indicator is either green or yellow/orange, HeroMD will proceed to
test the sensor. The sensor self-test can last between 1 and 40 seconds, if the
device does not detect zero movement.
The sensor test is indicated by a beep every 2ZLJVUKZHUKÅHZOPUNVM[OLYLK
Breathing Indicator Light (3) and Alarm Indicator Light (4). The device must be
placed on a stationary surface during this test. If the 40 second limit is reached
then the self-test Failure Alarm will sound and the device cannot be used.
0M[OLZLUZVY[LZ[WHZZLZHZ[HY[\W[\UL^PSSILOLHYK^P[OZPT\S[HULV\ZÅHZOPUN
of the green Breathing Indicator Light (3) indicating that monitoring
Green Battery OK
Yellow/Orange Battery nearing depletion – the monitor can be
used but the battery must be replaced as soon as
possible.
Red )H[[LY`ÅH[¶/LYVMD cannot be used, replace
battery. The Low Battery Signal will immediately
commence.
Page 8
English
has commenced and HeroMD can be positioned on the baby’s diaper/nappy (see
section 7 Fitting your HeroMD).
Warning: Ensure that the battery level is high enough for proper operation (i.e.
green or orange light). Otherwise, DO NOT use the monitor. If the battery is too
ÅH[[VVWLYH[L[OL)H[[LY`0UKPJH[VY3PNO[2^PSSÅHZOYLKHJJVTWHUPLKI`H
short beep every second. Change the battery before further use (see Section
10.3 Replacing the Battery).
To switch OFF, press both the ON/OFF button (6) and the MODE/OFF button (7)
simultaneously.
Green on each
breath
Breathing detected with no prior rouse event.
Yellow and
breathing rate alarm
(Dual-tone beep
every second)
Breathing rate below 8 breaths per minute. If
the breathing rate increases to over 8 breaths
per minute, breathing indicator light will reset
to green (normal) and the warning will stop. To
disable this function, see Section 9.3 Breathing
rate warning.
Red on each breath There has been at least one incident of no
breathing for 15 seconds, where breathing was
detected after the vibration (see below).
Red and Rouse
Warning Alarm
The Rouse Warning indicates that there has
been 3 vibration/rousing incidents. To disable
this function, see Section 9.2 Rouse Warning.
8.2 Monitoring
During monitoring, the Breathing Indicator Light (3) provides information about
your baby’s breathing, while the Alarm Indicator Light (4) alerts you to potential
problems.
0M[OLYLPZUVIYLH[OPUNKL[LJ[LK[OLU[OLHSHYTPUKPJH[VYSPNO[^PSSÅHZOYLKL]LY`
3 seconds. If breathing is detected then the Breathing Indicator Light (3ÅHZOLZ
with each breath:-
Page 9
English
The Alarm Indicator Light (4ZPNUPÄLZ[OLMVSSV^PUN!
NOTE: It is recommended that the parent / caregiver is trained to deal with situations
^OLYL[OLIHI`OHZMVYL_HTWSLZ\ɈLYLKMYVTHWYVSVUNLKHWULHL]LU[
(( ))
Flashes red with
vibrating stimulus
and 5 short beeps
If no movement is detected at all for 15 seconds, HeroMD
gently vibrates in an attempt to rouse the baby. The Alarm
Indicator Light (4ÅHZOLZYLKZPT\S[HULV\ZS`^P[OHILLW
0MIYLH[OPUNTV]LTLU[PZKL[LJ[LKHNHPU^P[OPU[OLUL_[5
seconds, the Breathing Indicator Light (3^PSSÅHZOYLKVU
each subsequent breathing movement. This is an indication
that there has been an incident of no breathing movement
for 15 seconds.
Flashes red and
alarm sounds
If no breathing movement at all is detected for a further 5
seconds after the vibration stimulus (20 seconds in total),
the Alarm Indicator Light (4ÅHZOLZYLKHUK[OLOPNOWYPVYP[`
audible alarm sounds. The operator must attend to the
baby immediately. The alarm can be deactivated by turning
HeroMDVɈJVTWSL[LS`WYLZZ656--6) and MODE/OFF (7)
buttons simultaneously).
8.3 Clothing
HeroMD can be clipped onto the folded waistband of the diaper or the
waistband of elasticated pants, as long as the Breathing Sensor (1) touches
the baby in the tummy area.
The soft sensor tip on th emonitor is made from medical grade silicone and
is hypoallergenic. In the unlikely event that a red friction mark is noticed on
the baby’s skin where the monitor was positioned, then we recommend that
a thin layer of clothing is placed between the baby’s skin and the monitor,
but ensure that the Sensor maintains contact. The position of the monitor
T\Z[HSZVILJOHUNLK[VHKPɈLYLU[SVJH[PVUVU[OL[\TT`H^H`MYVT^OLYL
the red mark was noticed and preferably closer to the side.
The emonitor can also be used if baby is dressed in light clothing (for
L_HTWSLH)HI`NYVV]LY[OLUHWW`VYWHU[Z[V^OPJO/LYVMD is attached.
;VVT\JOJSV[OPUNTH`H[[LU\H[LVYT\ɊL[OLHSHYT4HRLZ\YL[OLHSHYT
can be heard if baby is covered in clothing and/or blankets.
Page 10
English
.9 SETTINGS
9.1 AudibleTick
This feature causes HeroMD to emit an audible ‹tick› on each breathing
movement. To enable the Audible tick, ensure that HeroMD is switched ON,
then press the MODE/OFF button (7IYPLÅ`SLZZ[OHU1 second). To increase
the volume of the tick, press the MODE/OFF button once again for medium
]VS\TLHUKHNHPUMVYOPNO]VS\TL;V[\YUVɈIYPLÅ`WYLZZ[OL46+,6--
button a fourth time – HeroMD will give a louder beep. This feature may be
used with a baby sound monitor to enable you to ‘hear’ baby’s movements
from a distance.
9.2 Rouse Warning
During monitoring, if no breathing movement is detected for 15 seconds,
HeroMD vibrates gently in an attempt to rouse the baby. If breathing movement
YLZ\TLZ^P[OPU[OLUL_[5 seconds, the Breathing Indicator Light (3) will
ÅHZOYLKVULHJOZ\IZLX\LU[IYLH[OPUNTV]LTLU[HZHUPUKPJH[PVU[OH[
there has been an event of no breathing for 15 seconds. With the Rouse
Warning enabled, after 3 such vibration and successful rousing incidents,
the Breathing Indicator Light (3^PSSÅHZOYLKL]LY`2 seconds with a
simultaneous audible beep. This alerts you to the fact that your baby has
stopped breathing for 15 seconds on three occasions and has then resumed
breathing movement after HeroMD has vibrated.
Note:- Monitoring will continue while the Rouse Warning is sounding. The
Rouse Warning is automatically enabled each time HeroMD is switched ON. To
disable this feature, ensure that HeroMD is switched ON, then press and hold
the MODE/OFF button (7) for at least 2 seconds until a tone is heard with a
IYPLM]PIYH[PVUHUKHZPT\S[HULV\ZÅHZOVM[OLYLK)YLH[OPUN0UKPJH[VY3PNO[3)
and Alarm Indicator Light (4). If you want to enable the warning again, switch
HeroMDVɈJVTWSL[LS`WYLZZIV[O656--6) and MODE/ OFF (7) buttons
simultaneously), then switch it ON again (the rouse warning is enabled by
default when HeroMD is switched on).
9.3 Breathing-rate Warning
The Breathing-rate Warning alerts you if there are less than 8 breathing
TV]LTLU[ZWLYTPU\[L;OL^HYUPUNPZPKLU[PÄLKI`[OL)YLH[OPUN0UKPJH[VY
Light (3ÅHZOPUN`LSSV^^P[OHZPT\S[HULV\ZK\HS[VULH\KPISLILLWL]LY`
second. This feature is automatically enabled each time HeroMD is switched
ON. To disable this warning during monitoring, ensure that HeroMD is switched
ON, then press and hold the ON/OFF button (6) for more than 2 seconds
until there is a brief double-beep with short vibration and a simultaneous
ÅHZOVM[OL`LSSV^)YLH[OPUN0UKPJH[VY3PNO[3) and Alarm Indicator Light (4).
If you want to enable the warning again, switch HeroMDVɈJVTWSL[LS`WYLZZ
both ON/OFF (6) and MODE/OFF (7) buttons simultaneously), then switch it
ON again. The Breathing-rate Warning is enabled by default when HeroMD is
switched on.
Page 11
English
.10 BATTERY
10.1 Battery Indicator
If the battery becomes depleted during monitoring, the Battery Indicator Light
(2^PSSÅHZOHZMVSSV^Z!
10.2 Battery Life
The life of the replaceable battery depends entirely on usage. Battery life will
]HY`ZPNUPÄJHU[S`KLWLUKPUNVU[OLH]LYHNLKHPS`K\YH[PVUVM\ZLHUKVYHSHYT
K\YH[PVUHUKVYU\TILYVMHSHYTZ;\YUPUNVUHUKVɈ\UULJLZZHYPS`ZOVY[LUZ
[OLIH[[LY`SPML0M[OLU\TILYVMHSHYTZPZOPNOJOLJRKPHWLYÄ[TLU[
Please note that the product guarantee does not apply to the battery.
The typical operating time before the battery needs replacement is 6 - 4
months when used on average 8 hours per day.
10.3 Replacing the Battery
For all MD models: use a CR2 (CR15270) battery available from most retail
outlets (please see our website www.snuza.com for information about
batteries and details of your national distributor).
10.3.1 <ZL`V\YÄUNLYUHPSVYHZTHSSÅH[PTWSLTLU[>P[OHWPUJOPUNHJ[PVU
(Figure 2 and Figure 3), gently pull back the Battery Cover Release Clip
(10) on the underside of the monitor and lift the Battery Cover at the
same time (Figure 4).
3 audible beeps every 4
ZLJVUKZHUKYLKÅHZO
every 2 seconds
The battery is nearing depletion. Replace battery before
further use (see Section 10.3 Replacing the Battery).
Page 12
English
10.3.2 Remove the depleted battery by gently tapping HeroMD on your hand
with the battery cover opening towards the ground.
10.3.3 0UZLY[[OLUL^IH[[LY`ULNH[P]LLUKÄYZ[HZZOV^UPU-PN\YL5. Ensure
that the polarity is correct (align the positive end ‘+’ of the battery
with the ‘+’ symbol in the battery housing, as indicated). Replace the
Battery Cover and ensure that it is correctly closed (Figure 6).
Do not use the monitor without the Battery Cover in place.
10.3.4 Test the unit by switching on and ensuring that the Battery Indicator
Light (2ÅHZOLZNYLLU
10.3.5 If the unit starts alarming after the battery has been replaced, simply
press the ON/OFF and OFF/MODE buttons simultaneously to turn it
VɈ
NOTE: Incorrect placement of the battery may result in a safety hazard;
please follow the instructions as above.
Page 13
English
.12 TROUBLESHOOTING
*OLJRPUJVYYLJ[Ä[TLU[HUKWSHJPUNVM/LYVMD on baby’s diaper (see Section
5Diaper/Nappy Fitmentand Section 7 Fitting your Snuza HeroMD).
Battery failure. The Battery Indicator Light (2) will show red (see Section 9.3
Replacing the Battery).
Please visit our website www.snuza.comfor further information.
.11 MAINTENANCE
11.1 Disposal
The device, battery and packaging material must be disposed of in
accordance with your country’s laws governing the disposal and recycling of
batteries.
11.2 Cleaning and Storage
Gently wipe with a damp cloth to remove any dirt. A mild soap may be
used for stubborn dirt.
Do not use any other cleaning agents as they may contain damaging
chemicals.
The monitor is splash resistant, not waterproof. Do not immerse in water.
0MP[NL[Z^L[KY`P[VɈPTTLKPH[LS`
When changing the battery, dirt that is trapped between the battery
replacement hatch and the case may be cleaned with a dry cotton bud
once the Battery Cover (9) has been removed. Be sure that the rubber
seal is free of dirt before replacing the Battery Cover, as this could
compromise the seal.
When not in use, keep your HeroMD in its protective case. Do not store in a
damp area.
Page 14
English
.13 DISCLAIMER
Customers use this monitor at their own risk and Snuza International (Pty) Ltd,
its members, employees, agents, contractors, representatives, manufacturers,
distributors and associates («SNUZA») shall not be held liable for any loss,
KHTHNLVYPUQ\Y`Z\ɈLYLKI`[OLJ\Z[VTLYVYHU`V[OLYWLYZVUHYPZPUNMYVT
or in connection with, the use or manufacture of the monitor, including loss,
KHTHNLVYPUQ\Y`Z\ɈLYLKI`[OLJ\Z[VTLYVYHU`V[OLYWLYZVUHZHYLZ\S[VM
any defects in respect of the monitor, and all warranties, and any other liability
MYVT^OH[ZVL]LYJH\ZLHYPZPUNHYLOLYLI`L_JS\KLKHUK[OLJ\Z[VTLYOLYLI`
PUKLTUPÄLZ:U\aH0U[LYUH[PVUHS7[`3[KPUYLZWLJ[VMHU`Z\JOSPHIPSP[`
.14 GUARANTEE
Snuza International (Pty) Ltd guarantees this product to be free from defects
in materials and workmanship for a period of 12 months from the original date
VMW\YJOHZL]LYPÄLKI`HZHSLZYLJLPW[6\YN\HYHU[LLSPHIPSP[`ZOHSSILSPTP[LK
to replacing the unit free of charge and does not include transport costs. Our
N\HYHU[LLL_[LUKZ[VHSSJV\U[YPLZPU^OPJO[OPZWYVK\J[PZZ\WWSPLK)`[OLHJ[
of operating this product, the user accepts all resulting liability. We reserve the
right to modify the provisions of this guarantee at any time without notice. This
guarantee does not cover the battery, incorrect application, tampering, misuse
or transport damage.
Page 15
English
English
Other manuals for Hero MD
4
Table of contents
Other Snuza Medical Equipment manuals
Popular Medical Equipment manuals by other brands
Drive Medical
Drive Medical 18715 instruction manual
Sendoline
Sendoline S1-E operation instruction
Atos Medical
Atos Medical PROVOX Vega Patient manual
Tempur-Pedic
Tempur-Pedic TEMPUR-ERGO PLUS quick start guide
DeRoyal
DeRoyal Hypercontrol Instructions for use
Precision Tech
Precision Tech Lumina Max user manual
