Socket DURASCAN Series User manual

Bluetooth®wireless technology
Barcode Scanner
www.socketmobile.com
DURASCAN SERIES® USER GUIDE
socketmobile.com
DURASCAN®D700, D730, D740, D750, D755 & D760

Package Contents 4
Optional Charging Accessories 5
Product Information 6
Attach Wrist Strap 7
Charge the Battery 8
Powering On/Off 9
Scanning Barcodes 10
Bluetooth Connection Modes 11-12
Bluetooth Connection Roles/Reconnection 13-15
Setup using Application Mode
• Apple®16-17
• Android 18-19
• Windows PC 20
Setup without software application (Basic Mode):
• Apple®21
• Android 22
• Windows PC 23
TABLE OF CONTENTS

Pairing Reset (Bluetooth connection) 24
Factory Reset 25
Restore Method 26
Battery Replacement 27
Quick Programming 28-33
Status Indicators 34-37
Product Specifications 38-39
Supported Symbologies 40-42
Safety, Bluetooth, Compliance & Warranty 43-49, 52-55
Battery Warning Statements 50-51
TABLE OF CONTENTS

© 2020 Socket Mobile, Inc. All rights reserved. Socket®, the Socket Mobile logo, SocketScan™,
DuraScan®, Battery Friendly® are registered trademarks or trademarks of Socket Mobile, Inc. Micro-
soft® is a registered trademark of Microsoft Corporation in the United States and other countries.
Apple®, iPad®, iPad Mini®, iPhone®, iPod Touch®, and Mac iOS® are registered trademarks of Apple,
Inc., registered in the U.S. and other countries. The Bluetooth® Technology word mark and logos are
registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Socket Mobile,
Inc. is under license. Other trademarks and trade names are those of their respective owners.
Charging CableWrist Strap
DuraScan
D700 Series
Thank you for choosing Socket Mobile!
Let’s get started!
PACKAGE CONTENTS

Available separately
OPTIONAL CHARGING ACCESSORIES
5
Charging Stand
AC Power Supply
International Adapters
available
For all optional accessories visit our Socket Store.
Charging CradleCharging Dock

PRODUCT INFORMATION
6
The DuraScan 700 Series has a protection rating of IP54 for dust and water protection.
Socket Mobile’s barcodes scanners can be wiped clean with a cloth dampened with isopropyl
alcohol or water. Or, the barcode scanners can be wiped clean with a Sani-Cloth.
Warning: DO NOT IMMERSE IN WATER (scanner’s mechanics could be damaged)
*Also used to display the on-screen keyboard in Basic Mode (iOS only).
Scanner head
Product label
Lanyard Eyelet
Scan Indicator Light
Scan button
Power button*
Battery Light
(Green/Yellow/Red)
Bluetooth Light (Blue)
Charging pins
Power Connector
Stand Attachment
Battery Door

Attach the Wrist Strap (optional)
1. Detach the string loop of the tether from the wrist strap.
2. Feed the string loop through the eyelet.
3. Pull the tether through the string loop.
4. Pull tight so the string loop is secure.
5. Reattach the string loop’s tether to the wrist strap.
ATTACH WRISTRAP
7

The scanner must be fully charged before rst use. Please allow 8 hours
uninterrupted charging for the initial battery charge.
Lift the rubber ap to access the power connector.
• Yellow Light = Charging
• Green Light = Fully charged
Important: Charging from a computer USB port is not reliable and
not recommended.
CHARGE THE BATTERY
Rubber Flap
To open
Power Adapter
8

Powering On:
Press and hold down the small
power button until the Battery
light turns on and the scanner
beeps twice (low-high).
Powering O/ Disconnecting:
Press and hold down the small
power button until the scanner
beeps twice (high-low) and all
lights turn o.
The scanner will power o
automatically if device is not con-
nected within 5 minutes. Scanner
connected to a device will power
o within 2 hours if idle/inactive.
POWERING ON/OFF
Power button
9

1D/2D Barcode and OCR
Aim the scan beam straight
across the entire barcode
Scanning Barcodes
1. Hold the scanner a few inches from the barcode.
2. Aim, press and hold the trigger button.
By default, the scanner will beep, vibrate, and the scan indicator will
ash green to conrm a successful scan.
Caution: Do not stare directly into the scanner’s light beam.
SCANNING BARCODES
Trigger button
10