Socket CHS 7Ci User manual

COMMAND BARCODES
1D IMAGER MODELS - 7Ci, 7Di, D700, S800
This document pertains to the following 7Ci, 7Di, D700, S800:
The part number (P/N) is labeled inside the battery compartment for the CHS 7 Series.
D700
D700
Model P/N
D700 Gray 8550-00094
D700 Safety Green
D700 Caution Cone Orange
Model P/N
7Di Gray 8550-00065
Model P/N
7Ci Blue 8550-00071
7Ci Gray 8550-00062
7Ci Green 8550-00088
7Ci Red 8550-00070
7Ci White 8550-00073
7Ci Yellow 8550-00068
Model P/N
S800 Black 8550-00069
Di
Ci

TABLE OF CONTENTS
Advanced Users Only —8
Apple iOS Onscreen Keyboard —8
Automatic Reconnection Settings —11
Bluetooth Connection Mode —4
Bluetooth Connection Mode —10
Bluetooth Connection Roles —10
Data Mode - For SPP Mode Only —11
Data Sufx —5
Factory Defaults —3
HID Keyboard Language Settings —7
Power Button Double key Press —12
Rumble/Beep Modes —6
Scanner Engine Command Barcodes —13

INSTRUCTIONS: Scan command barcode(s) to quickly congure the barcode scanner.
Many of the command barcodes only work with a scanner in a particular Bluetooth mode as indicated
by the header row of each table.
Make sure the scanner is not connected to a host computer or device before scanning a
command barcode!
To use the scanner on multiple hosts, perform the unpair sequence.
1.Power on the scanner.
2.Press and hold down the trigger button.
3.Press and hold down the power button.
4.After you hear 3 beeps, release both buttons.
By default, the scanner is in Basic Mode (HID) as a Keyboard device.
For scanners in Application Mode (SPP) or Application Mode (MFi-SPP), you can alternatively cong-
ure some settings by using the Scanner Settings app. You can download the app from iTunes, and Google
Play.
3
FACTORY DEFAULTS
Factory Reset
Congures the CHS to revert all settings to factory defaults. The CHS powers off after scanning this bar-
code.
#FNB00F0#

4
BLUETOOTH CONNECTION MODE
All Bluetooth connection modes OK.
Scan command barcode(s) to quickly congure the scanner. By default, the scanner is in Basic Mode (HID)
as a Keyboard device.
IMPORTANT! Make sure the scanner is not connected to a host computer/device before scanning a com-
mand barcode!
Basic Mode (HID) (default)
Congures the scanner to Human Interface Device (HID) mode. The scanner will be discoverable as a Key-
board to other Bluetooth devices.
Required for Apple iOS, Mac OS.
#FNB00F40001#
HID-Peripheral
Congures the scanner as a Peripheral class device (optional for Windows and Android).
#FNB0001000500#
Application Mode (SPP)
Changes the scanner to Bluetooth Serial Port Prole (SPP) mode (optional for Windows and Android).
#FNB00F40000#
Application Mode (MFi-SPP)
Changes the scanner to Application Mode (MFi-SPP) (equivalent to SPP mode).
#FNB00F40002#

5
All Bluetooth connection modes OK.
You can congure the scanner to automatically add a sufx and/or prex to each scan of data.
Note: Scanning multiple commands in a single instance will overwrite (not append) the previous
command.
Sufx – Carriage Return (default)
Congures the scanner to add a carriage return after decoded data.
#FNB00F50BC6048FFEE1680DE040000#
Sufx – Tab
Congures the scanner to add a tab after decoded data
#FNB00F50BC60408FFEE016809EB040000#
Sufx – Carriage Return & Line Feed
Congures the scanner to add a carriage return and line feed after decoded data.
#FNB00F509C60408FFEE01EB010000#
Data As Is
Congures the scanner to return only the decoded data (i.e., no prex or sufx).
#FNB00F509C60408FFEE01EB00000#
DATA SUFFIX

6
All Bluetooth connection modes OK.
IMPORTANT! Make sure the scanner is not connected to a host computer before scanning a command bar-
code.
Vibrate “On”
Enables scanner to vibrate to indicate successful scan
#FNB01310001000100FA0000#
Vibrate “Off”
Disables scanner from vibrating to indicate successful scan
#FNB013100010000#
Beep “On”
Enables scanner to beep to indicate successful scan
#FNB01190E000100030078004B#
Beep “Off”
Disables scanner from beeping to indicate successful scans
#FNB01190E000100000078004B#
RUMBLE/BEEP MODES

7
Scan only with scanner in Basic Mode (HID).
Scan barcode to enable language.
English (Default)
#FNB01430001#
French
#FNB01430002#
German
#FNB01430003#
Spanish
#FNB01430004#
HID KEYBOARD LANGUAGE SETTINGS

8
Scan only with scanner in Basic Mode (HID).
Apple iOS Onscreen Keyboard and Beep Enabled (Default)
Congures the scanner to activate the iOS onscreen keyboard when connected to an iOS device and the
scanner power button is double-pressed.
Disable both Onscreen Keyboard and Beep
#FNB013A0000000000000000000000000000#
Enable Beep
#FNB013A0500000000000000000000000000#
Disable Beep
#FNB013A0100000000000000000000000000#
APPLE iOS ONSCREEN KEYBOARD
ADVANCED USERS ONLY
All Bluetooth Connection Modes OK.
*Barcodes only work for 7M and above. For 7M and below refer to page 4.
Basic Mode (HID) (default)
Congures the scanner to Basic Mode (HID) Human Interface Device. The scanner will be discoverable as a
Keyboard to other Bluetooth devices.
Required for Apple iOS, Mac OS, Nokia E71.
#FNB00F40001#

9
Basic Mode (HID) Keyboard (default)
Changes a scanner in HID-Peripheral mode to HID-Keyboard mode.
Required for Mac OS and Nokia E71, optional for Apple iOS.
#FNB0001000540#
Basic Mode (HID) Peripheral
Changes a scanner in HID-Keyboard mode to HID-Peripheral mode (optional for Windows and Android).
#FNB0001000500#
Application Mode (SPP)
Congures the scanner to Serial Port Prole (SPP) mode.
Required for BlackBerry, optional for Windows and Android.
#FNB00F40000#
Application Mode (MFi-SPP)
Changes a scanner to Application Mode (MFi-SPP).
Required for Apple iOS applications developed with SocketScan 10 SDK.
#FNB00F40002#

10
All Bluetooth Connection Modes OK.
Advanced users only.
SPP Acceptor Mode
Changes the scanner to Bluetooth Serial Port Prole (SPP) mode as an acceptor (waits for computer / de-
vice to initiate connection).
#FNC SPP Acceptor 000000000000#
SPP Initiator Mode
Changes the scanner to Bluetooth Serial Port Prole (SPP) mode as an initiator. Use barcode generating
software or website (e.g., http://barcode.tec-it.com) to create a barcode with the following data:
#FNC SPP Initiator aabbccddeeff#
Where aabbccddeeff is the Bluetooth Device Address of the computer / device you want to connect the
scanner to.
Recommended barcode (module) width: 2-3cm
N/A
BLUETOOTH CONNECTION MODE
BLUETOOTH CONNECTION ROLES
Scan only with scanner in Application Mode (SPP) or Application Mode (MFi-SPP)
Advanced users only.
Acceptor (default)
Congures the scanner to accept a Bluetooth connection puts the scanner in discoverable mode.
#FNA#
Initiator
Congures the scanner to initiate a connection to a computer/device with the Bluetooth Device Address
specied in the barcode.
The barcode must be formatted in Code 128 and contain the data #FNIaabbccddeeff# such that aabbccd-
deeff is the Bluetooth Device Address of the computer/device you want to connect to the scanner. Re-
quired for Windows when using SPP mode.
You must create a custom barcode for each computer/device that you want to connect to the scanner.
Use barcode generating software or website (e.g., http://barcode.tec-it.com))

1111
DATA MODE - FOR SPP MODE ONLY
All Bluetooth Connection Modes OK.
Advanced users only.
Packet Mode (default)
Congures the scanner to transmit decoded data in packet format.
#FNB013401#
Raw Mode
Congures the scanner to transmit decoded data in raw (unpacketed) format. Do not scan this barcode in
Application Mode (MFi-SPP).
#FNB013400#
AUTOMATIC RECONNECTION SETTINGS
All Bluetooth Connection Modes OK.
Important! After scanning this command barcode, power off and power on the scanner to make sure it is
congured properly.
Enable Automatic Reconnection from scanner (default)
Congures the scanner to automatically initiate a connection to the last paired computer/device after the
scanner is powered on.
Disable Automatic Reconnection from scanner
Congures the scanner to wait for a computer/device to initiate a Bluetooth connection after the scanner
is powered on.

12
For Basic Mode (HID) only
Scanner Engine Command Barcodes
Ctrl + Z
Scan to Enable WITH BEEP
Scan to Enable NO BEEP
Ctrl + A
Scan to Enable WITH BEEP
Scan to Enable NO BEEP
Shift + Tab
Scan to Enable WITH BEEP
Scan to Enable NO BEEP
12
POWER BUTTON DOUBLE KEY PRESS

SCANNER ENGINE COMMAND BARCODES
Ctrl + S
Scan to Enable WITH BEEP
Scan to Enable NO BEEP
INSTRUCTIONS: Scan command barcode(s) to quickly congure the barcode scanner.
Make sure the scanner is not connected to a host computer or device before scanning a command
barcode!
To use the scanner on multiple hosts, perform the unpair sequence. For instructions, see User’s
Guide.
By default, the scanner is in Basic Mode (HID) as a Keyboard device.
You may want to cover adjacent barcodes before scanning a command barcode to prevent scanning
the wrong code.
For scanners in Application Mode (SPP) or Application Mode (MFi-SPP), you can alternatively congure
some settings by using the Scanner Settings app.
13

14
UPC/EAN
Enable/Disable UPC-A
Parameter # 0x01
To enable or disable UPC-A, scan the appropriate bar code below.
*Enable UPC-A
(0x01)
Disable UPC-A
(0x00)
Enable/Disable UPC-E
Parameter # 0x02
To enable or disable UPC-E, scan the appropriate bar code below.
*Enable UPC-E
(0x01)

Disable UPC-E
(0x00)
Enable/Disable UPC-E1
Parameter # 0x0C
To enable or disable UPC-E1, scan the appropriate bar code below.
NOTE: UPC-E1 is not a UCC (Uniform Code Council) approved symbology.
Enable UPC-E1
(0x01)
*Disable UPC-E1
(0x00)
Enable/Disable EAN-8
Parameter # 0x04
To enable or disable EAN-8, scan the appropriate bar code
below.
15

*Enable EAN-8
(0x01)
Disable EAN-8
(0x00)
Enable/Disable EAN-13
Parameter # 0x03
To enable or disable EAN-13, scan the appropriate bar code below.
*Enable EAN-13
(0x01)
Disable EAN-13
(0x00)
Enable/Disable Bookland EAN
Parameter # 0x53
To enable or disable EAN Bookland, scan the appropriate bar code
below.
16

17
Enable Bookland EAN
(0x01)
*Disable Bookland EAN
(0x00)
NOTE: If you enable Bookland EAN, select a Bookland ISBN Format on page 49. Also
select either Decode UPC/EAN Supplementals, Autodiscriminate UPC/EAN
Supplementals, or Enable 978/979 Supplemental Mode in Decode UPC/EAN
Supplementals on page 50.
Bookland ISBN Format
Parameter # 0xF1 0x40
If Bookland EAN is enabled, select one of the following formats for Bookland data:
Bookland ISBN-10 - The digital scanner reports Bookland data starting with
978 in traditional 10-digit format with the special Bookland check digit for
backward-compatibility. Data starting with 979 is not considered Bookland in
this mode.
Bookland ISBN-13 - The digital scanner reports Bookland data (starting with
either 978 or 979) as EAN-13 in 13-digit format to meet the 2007 ISBN-13
protocol.
NOTE: For Bookland EAN to function properly, ensure Bookland EAN is enabled (see
Enable/Disable Bookland EAN), then select either Decode UPC/EAN Supplementals,
Autodiscriminate UPC/EAN Supplementals, or Enable 978/979 Supplemental Mode in
Decode UPC/EAN Supplementals.

18
*Bookland ISBN-10
(0x00)
Bookland ISBN-13
(0x01)
Decode UPC/EAN Supplementals
Parameter # 0x10
Supplementals are appended characters (2 or 5) according to specific code format
conventions (e.g., UPC A+2, UPC E+2). Several options are available:
If Decode UPC/EAN with Supplemental characters is selected, the scan
engine does not decode UPC/EAN symbols without supplemental characters.
If Ignore UPC/EAN with Supplemental characters is selected, and the SM1 is
presented with a UPC/EAN symbol with a supplemental, the scan engine
decodes the UPC/EAN and ignores the supplemental characters.
If Autodiscriminate UPC/EAN Supplementals is selected, scan Decode
UPC/EAN Supplemental Redundancy, then select a value from the numeric
bar codes beginning on page 93. A value of 5 or more is recommended.
Select Enable 978/979 Supplemental Mode to enable the SM1 to identify
supplementals for EAN-13 bar codes starting with a ‘978’ or ‘979’prefix only.
All other UPC/EAN bar codes are decoded immediately and the supplemental
characters ignored.
NOTE: To minimize the risk of invalid data transmission, we recommend selecting
whether to read or ignore supplemental characters.
Select the desired option by scanning one of the following bar codes.
*Ignore UPC/EAN With Supplementals

(0x00)
Decode UPC/EAN With Supplementals
(0x01)
Autodiscriminate UPC/EAN Supplementals
(0x02)
Enable 978/979 Supplemental Mode
(0x05)
Decode UPC/EAN Supplemental Redundancy
Parameter # 0x50
With Autodiscriminate UPC/EAN Supplementals selected, this option adjusts the
number of times a symbol without supplemental are decoded before transmission.
The range is from 2 to 30 times. Five or above is recommended when decoding a mix
of UPC/EAN symbols with and without supplementals, and the autodiscriminate
option is selected.
Scan the bar code below to select a decode redundancy value. Next scan two
numeric bar codes beginning on page 93. Single digit numbers must have a leading
zero. To change the selection or cancel an incorrect entry, scan the Cancel bar code
on page 94.
19

20
Decode UPC/EAN Supplemental Redundancy
(Default: 7)
Transmit UPC-A Check Digit
Parameter # 0x28
Scan the appropriate bar code below to transmit the symbol with or without the
UPC-A check digit.
*Transmit UPC-A Check Digit
(0x01)
Do Not Transmit UPC-A Check Digit
(0x00)
Transmit UPC-E Check Digit
Parameter # 0x29
Scan the appropriate bar code below to transmit the symbol with or without the
UPC-E check digit.