SoClean SC1400 User manual

Automated CPAP
Disinfecting
System
User
Manual
Breathe Clean. Sleep Easy.
A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 1A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 1 7/2/20 5:25 PM7/2/20 5:25 PM

Thank you for purchasing the SoClean 3 Automated
CPAP Disinfecting System. Consistent disinfection is
vital to reducing the presence of germs and bacteria.
A more restful night is just a few steps away.
Please read this entire manual carefully before using your
SoClean 3 and keep it for future reference.
This manual contains the necessary information you need to get
your SoClean 3 set up and running. Once connected, you’ll find
that daily disinfection of your CPAP equipment has never been
easier. The SoClean 3 patented process destroys up to 99.9% of
CPAP bacteria without the need for water or messy chemicals.
SoClean 3 is designed to fit most CPAP models. You can visit
SoClean.com/connection for a list of CPAP machines which
require an adapter.
Questions? Contact us at SoClean.com/contact
AUTOMATED CPAP
DISINFECTING SYSTEM
A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 2A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 2 7/2/20 5:25 PM7/2/20 5:25 PM

TABLE OF
CONTENTS
Overview 04
Warnings and Precautions 06
Ozone Safety 07
Introducing Your SoClean 3 08
Setting Up Your SoClean 3 18
Using your SoClean 3 34
Maintenance 41
Warranty Information 43
General Troubleshooting 46
A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 3A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 3 7/2/20 5:25 PM7/2/20 5:25 PM

4
OVERVIEW
Indications for Use, Contraindications, and Specications
INDICATIONS FOR USE
The SoClean 3 device is intended to be used to supplement cleaning procedures for home use PAP
accessories by reducing microbial populations present on the PAP accessory surfaces.*
CONTRAINDICATIONS FOR USE
Discontinue use and call customer care if acne or a rash develops along the mask contact line,
or if you experience respiratory irritation. Persons with underlying lung diseases, such as asthma
and chronic obstructive pulmonary disease (also known as COPD, which includes emphysema and
chronic bronchitis) and those with cardiovascular disease may be sensitive to ozone and should
consult with their physician before using this product.
Pregnant or breastfeeding women and parents of children 18 and under, on behalf of their children,
should consult with their health-care professional before using this product.
Read this instruction manual before operating this device.
The SoClean 3 device should only be used according to the procedures described in this manual.
If it is used in a manner not specied by SoClean®, the safety protection provided by the equipment
may be impaired.
SPECIFICATIONS
OVERVIEW
*Disclaimer: SoClean does not represent through the use of the term disinfect, disinfectant or disinfection herein, or in
other documentation, a kill rate of more than 99.9% of bacteria and germs in CPAP equipment
Ozone Generation Time
7 minutes
Electromagnetic Compatibility
The SoClean 3 complies with all applicable
electromagnetic compatibility requirements (EMC)
according to IEC 60601-1-2:2014, for residential,
commercial and light industry environments. If
electrical interference is suspected during operation,
contact SoClean customer service.
CPAP Hose Diameter Compatibility
for use with CPAP hose diameters in the range
of 15 to 19 mm ID.
Ozone Concentration
335 ppm ± 30 ppm maximum from ozone
generator.
USB Port
This port is provided only for USB charging.
No data is provided on this port.
Model Number
SC1400
Operating Environmental Conditions
Indoor use only.
Temperature: 10°C to 38°C (50°F to 100°F)
Relative Humidity: 10% to 80%
Altitude: sea-level to 8,500’ (2,591 m);
air pressure range 1013 hPa to 738 hPa
Physical Characteristics
Dimensions: 7.875” x 7.25” x 8.875”
Weight: 5.6lbs, Cord Length: 4’ 8”
Electrical Characteristics
AC Adapter Input: AC 100~240V, 50/60HZ, 0.5A
AC Adapter Output: DC 12V, 1.5A Max
Power Consumption: 18W Max
USB Charging Port Output: DC 5V, 0.5 A Max
Storage and Transport Conditions
-20°C to +55°C (-4°F to 131°F)
15% to 95% non-condensing humidity
A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 4A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 4 7/2/20 5:25 PM7/2/20 5:25 PM

5
FCC Notice Part 15:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult SoClean Customer Care for help.
FCC Caution: Changes or modications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Caution: This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an
uncontrolled environment. To maintain compliance with the FCC and IC RF Exposure guidelines, place
the unit at least 20 cm away from nearby persons.”
OZONE LEAKAGE
The SoClean 3 meets 21 C.F.R. § 801.415 for the maximum allowable ozone accumulation of not
more than 0.05 parts per million.
OVERVIEW
DISPOSAL INFORMATION Safe Disposal of the device: Follow the local, state, and national governing
ordinances and recycling instructions regarding disposal or recycling of the device and device components
at the end of the expected service life.
No Liquid
in SoClean
Chamber
Do not use
if package
is damaged.
Storage and
Transport
Conditions
Consult
Manual
Waste Electrical and Electronic Equipment
(WEEE). It is the responsibility of the end
user to dispose of this equipment at a
designated collection point.
Date of
Manufacture
General
Warning
Not made
with natural
rubber latex
Serial
Number
Federal
Communications
Commission
General
Caution
SYMBOLS
A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 5A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 5 7/2/20 5:25 PM7/2/20 5:25 PM

6
WARNING: Do not submerge the SoClean 3 device in water or use chemical cleaners
on or in your SoClean 3. Keep away from water sources including rain, bathtubs, sinks,
and pools. To clean, wipe with a damp cloth.
WARNING: Keep away from children. Do not place any living thing or anything other
than your mask and hose inside the Disinfection Chamber.
WARNING: Do not inhale from the Hose or the Hose Outlet on the back of the device.
Do not breathe through the CPAP mask if the SoClean 3 is operating a Disinfect Cycle.
WARNING: Be sure the CPAP, Breathing Hose, Ozone Hose, and CPAP Adapter are
connected before operating the SoClean 3 device.
WARNING: Do not place any ammable or ignitable items on top of the SoClean 3 device.
Do not use in explosive air environments, near gas vapors, or other ammables, etc.
WARNING: The SoClean 3 Lid will not open until the green status light illuminates
(approximately 1 hour after completion of a Disinfect Cycle).
WARNING: Ensure that the SoClean 3 Lid Gasket is not damaged by inspecting for
visible cracks before operating a Disinfect Cycle.
WARNING: Do not disassemble the SoClean 3 device.
WARNING: Do not use the SoClean 3 device if a fragrant essence is used in the CPAP
water reservoir or if highly fragrant detergents are used to disinfect the CPAP equipment.
WARNING: If the SoClean 3 has been dropped or visibly damaged or if cracks in the
tubing or enclosure are noticed, stop usage and contact SoClean.
WARNING: Do not run the SoClean 3 and CPAP machine at the same time.
WARNING: Do not place anything other than CPAP mask and hose in the SoClean
Disinfection Chamber.
CAUTION: Do not put Neutralizing Pre-Wash or water into the SoClean Disinfection
Chamber. Do not use the Neutralizing Pre-Wash on or in the SoClean 3 device. The
Pre-Wash is intended for washing CPAP equipment only.
CAUTION: In the event of loss of power, rerun the entire Disinfect Cycle to make sure
the CPAP equipment has been disinfected properly.
Warnings
and Precautions
A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 6A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 6 7/2/20 5:25 PM7/2/20 5:25 PM

7
SoClean 3 uses Activated Oxygen, an eective, invisible disinfectant.
Activated Oxygen, also known as ozone, contacts the CPAP equipment
only, not the user, during the Disinfecting Cycle.
SoClean 3 is designed to produce a sucient level of ozone for disinfection
of your CPAP equipment. The smell of ozone is detectable at low
concentrations by some people and you may smell ozone briey during
the Disinfecting Cycle. The scent of ozone has the characteristic of a sweet
chlorine-like smell.
Ozone is a gaseous disinfectant that naturally breaks down to oxygen
after it is generated. The SoClean 3 device is designed to safely contain
ozone within the system. It has a Filter inside the Disinfection Chamber
to help convert ozone back to oxygen.
WARNING: In rare instances, those with respiratory sensitivities could experience
irritation. Should this occur, discontinue use and contact SoClean.
WARNING: If a strong ozone odor is detected when the SoClean 3 is operating per
the instructions for use, inspect for visible damage, such as cracks in the enclosure
or tubing along with tubing connections. If you believe the SoClean 3 device is
not operating correctly, disconnect the power to the device and contact SoClean.
NOTE: Any serious incident that has occurred in relation to the device should be reported
to the manufacturer or the competent authority of the member state in which the user
is established.
Ozone Safety
A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 7A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 7 7/2/20 5:25 PM7/2/20 5:25 PM

8
I’m ready to
disinfect your
CPAP equipment!
Introducing
Your SoClean 3
Say “Hi” to your new SoClean 3!
A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 8A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 8 7/2/20 5:25 PM7/2/20 5:25 PM

9
HOSE SLOT
Your CPAP hose
rests here during
the Disinfect Cycle.
LID
Opens for access to the
Disinfection Chamber.
CONTROL PANEL
Houses all the buttons and
icons for operating your
SoClean 3.
SOCLEAN 3 PARTS
INTRODUCING YOUR SOCLEAN 3
A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 9A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 9 7/2/20 5:25 PM7/2/20 5:25 PM

10
LID LATCH
Keeps the Lid of the SoClean 3 closed
securely during the Disinfect Cycle and
Fresh Air Cycle
LID GASKET
Seals the Lid in order to
contain ozone within the
Disinfection Chamber.
HOSE DETECT
SENSOR
Your SoClean 3 only
operates with proper
configuration. A
Disinfect Cycle or a
Fresh Air Cycle will not
begin unless a CPAP
hose is detected and
the Lid is closed.
DISINFECTION
CHAMBER
Place your CPAP mask
inside for disinfection
when running a Disinfect
Cycle. The inside of the
Disinfection Chamber is
illuminated for visibility
in low light settings.
INTRODUCING YOUR SOCLEAN 3
A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 10A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 10 7/2/20 5:25 PM7/2/20 5:25 PM

11
FILTER
The Filter converts ozone in your
SoClean 3 and CPAP equipment into
fresh oxygen as it exhausts from the unit.
This component must be replaced every
6 months. Your SoClean 3 reminds you
when it needs replacement.
AIR INLET
Air enters the SoClean 3
from this small hole and
is converted into ozone
during the Disinfect Cycle.
OZONE TUBE
One end of the Ozone Tube connects to your CPAP
adapter, the other end comes already attached to the
back of the SoClean 3. This tube is what circulates
ozone or air through your CPAP equipment during
the Disinfect Cycle and Fresh Air Cycle.
POWER
INPUT
The cable from
the Power Adapter
provided with your
SoClean 3 plugs
in here.
PHONE
CHARGING
PORT
A USB port is
provided on the back
of your SoClean 3 to
conveniently charge
your cell phone when
your SoClean 3 is
connected to power.
FILTER DOOR
Your Filter goes in here.
The SoClean 3 unit will not
operate a Disinfect Cycle or
Fresh Air Cycle if the Filter
Door is open.
INTRODUCING YOUR SOCLEAN 3
A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 11A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 11 7/2/20 5:25 PM7/2/20 5:25 PM

12
CONTROL PANEL
Get to know the buttons used to control the device operation and the icons
that will tell you what is happening.
BUTTONS
There are four (4) buttons on the Control Panel that are used to operate
your SoClean 3. Buttons illuminate blue when any one button is pressed
to help with visibility in low-light conditions.
NOTE: There is no power button on your SoClean 3. The device is connected to
power and “on” when the Power Adapter is plugged into your SoClean 3 and the
AC wall socket.
A B
C
D
INTRODUCING YOUR SOCLEAN 3
A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 12A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 12 7/2/20 5:26 PM7/2/20 5:26 PM

13
BUTTONS (CONT.)
DISINFECT
CYCLE
Starts the disinfection process with a single push.
NOTE: Your CPAP mask and hose must be
present in the SoClean 3 with the Lid closed to
operate the Disinfect Cycle.
A
Used to set a 2, 4, or 6 hour delay to the start
of your Disinfect Cycle.
Set delay by pressing once for 2 hours, twice
for 4 hours, three times for 6 hours and four
times to turn the Delay feature o.
NOTE: For your convenience, the system
automatically defaults to the Cycle Delay that
was last run. If the Cycle Delay was not used,
the system will default to a 2-hour delay.
CYCLE
DELAY
B
FRESH AIR
CYCLE
C
Runs air through the system to freshen your
equipment with the push of a button.
NOTE: The Fresh Air Cycle does not disinfect
your CPAP equipment.
NOTE: Your CPAP mask and hose must be
present in the SoClean 3 with the Lid closed
to operate the Fresh Air Cycle.
LID OPEN
DOpens the Lid when the device is connected to
power. This button can also be used to cancel an
active Disinfect Cycle by pressing and holding
for 5 seconds.
INTRODUCING YOUR SOCLEAN 3
NOTE: If canceling a cycle, Lid cannot be
opened until Cycle Complete Icon illuminates.
(See page 40)
A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 13A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 13 7/2/20 5:26 PM7/2/20 5:26 PM

14
ICONS
There are seven (7) illuminated icons on the Control Panel that the SoClean
3 uses to communicate with you. Normally, the icons are off if the device
is idle and operating normally. See the notes below about why these icons
may illuminate and when you can expect to see them.
a b c d e
f
g
CYCLE
COMPLETE
aSolid Green
Indicates that either a Disinfect Cycle or Fresh
Air Cycle is complete.
NOTE: This icon will be illuminated continu-
ously after the cycle completes until you open
the Lid to remove your CPAP equipment. After
you open the Lid, the light will turn off.
INTRODUCING YOUR SOCLEAN 3
A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 14A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 14 7/2/20 5:26 PM7/2/20 5:26 PM

15
ICONS (CONT.)
FAULT/
UNABLE
TO RUN
bSolid Red
Indicates when your SoClean 3 has detected
an issue that prevents operating a Disinfect
Cycle or Fresh Air Cycle.
NOTE: When this icon is illuminated, the
device may be operating the cancellation
process (page 30) to remove ozone from the
system prior to allowing the Lid to be opened.
INTRODUCING YOUR SOCLEAN 3
FILTER
ISSUE
c
Solid Amber
1. May indicate that your Filter has expired
and will need to be replaced. You will not be
able to operate a Disinfect Cycle or a Fresh
Air Cycle.
2. Missing or counterfeit Filter. If you have
installed a new Filter in your SoClean 3 and this
icon illuminates solid amber when the Filter
door is closed, you may have purchased a
counterfeit SoClean 3 Filter and your SoClean
will not operate. Please purchase lters from
SoClean.com to ensure authenticity.
Flashing Amber
Indicates that it is time to order a new Filter. This
icon will ash amber only when you interact
with your SoClean. From the time it begins
to ash amber, you have 30 days or 30 uses
(whichever comes rst) to replace the Filter
NOTE: You can still use your SoClean 3 to
disinfect your CPAP equipment during this time.
A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 15A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 15 7/2/20 5:26 PM7/2/20 5:26 PM

16
c
HOSE NOT
DETECTED
eSolid Amber
Indicates that your CPAP hose is not present
or detected when the Lid is closed.
NOTE: Your SoClean 3 will not operate a
Disinfect Cycle or Fresh Air Cycle if your mask
and hose are not installed or detected in the
unit with the Lid closed.
INTRODUCING YOUR SOCLEAN 3
FILTER
DOOR ISSUE
dSolid Amber
Indicates that the Filter Door is not completely
closed. Check your Filter Door and open/
close it securely.
ICONS (CONT.)
Solid Amber (Continued)
NOTE: You cannot operate a Disinfect Cycle or
Fresh Air Cycle unless your SoClean 3 recognizes
that a genuine SoClean 3 Filter is installed and
the Filter Door is closed.
Ifyouareunabletoclearthisiconby installinganew
Filter and closing the Filter Door, please
contact SoClean customer support.
FILTER
ISSUE
Flashing Amber
Indicates that the hose was detected after the
Lid was closed. Open and close Lid with mask
and hose installed to continue.
A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 16A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 16 7/2/20 5:26 PM7/2/20 5:26 PM

17
2, 4, 6
HOUR
CYCLE
DELAY
fFlashing Blue
Indicates that the Cycle Delay can be changed
by pressing the Cycle Delay button.
NOTE: Mask and hose must be installed with the
Lid closed to modify and activate the Cycle Delay.
ICONS (CONT.)
CYCLE
PROGRESS
BAR
gProgressive Blue
Gradually turns blue from left to right as an indi-
cation of progress for a Disinfect Cycle or Fresh
Air Cycle.
NOTE: When the entire bar is illuminated blue
the cycle is nearly complete.
Solid Red
Indicates that an active Disinfect Cycle has been
interrupted (example: temporary loss of power).
NOTE: During this time, your SoClean 3 is pumping
air through the system to remove ozone.
INTRODUCING YOUR SOCLEAN 3
Solid Blue
Indicates if a Cycle Delay has been programmed.
Three indicator lights are provided.
One segment illuminated = 2 hr delay selected
(default)
Two segments illuminated = 4 hr delay selected
Three segments illuminated = 6 hr delay selected
No segments illuminated = no Cycle Start
delay selected
A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 17A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 17 7/2/20 5:26 PM7/2/20 5:26 PM

18
The following CPAP machines have adapters available from SoClean.
To order, go to your authorised reseller or SoClean.com.
SoClean is an independent company not aliated with Aeiomed, Apex Medical, Carefusion, Fisher & Paykel, Philips
Respironics, PMI Probasic, Puritan Bennett, RESmart, ResMed or Transcend. Names and associated trademarks are solely
owned by the respective companies and manufacturers. Depictions of brand logos on our website are for informational and
educational purposes only and are used for customer equipment recognition. We are not aliated or endorsed by any CPAP
equipment manufacturer.
NOTE: This list and adapter availability are based on information as of July
2020. If there is any CPAP equipment that needs an adapter and it is not listed
here please visit SoClean.com or contact your authorised reseller.
Manufacturer Model PN
Philips Respironics DreamStation PNA1410
ResMed AirSense10 PNA1210UNI
SUPPORTED CPAP MACHINES AND ADAPTERS
Setting Up
Your SoClean 3
A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 18A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 18 7/2/20 5:26 PM7/2/20 5:26 PM

1919
SETTING UP YOUR SOCLEAN 3
IF YOUR MACHINE REQUIRES A
Reservoir Lid Adapter:
Adapter
Installation Instructions
The following CPAP machines have adapters available from SoClean.
To order, go to your authorised reseller or SoClean.com.
A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 19A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 19 7/2/20 5:26 PM7/2/20 5:26 PM

20
Remove the Original Lid from
the CPAP reservoir base by
opening the Original Lid fully,
pushing one side of the hinge
tab outward and freeing the
Original Lid from the base.
Save the Original Lid in case it is needed in the future.
Install the Reservoir Lid
Adapter to the reservoir
base by inserting the hinge
pins into the notches on the
reservoir base. If needed insert
one hinge pin at a time and
gently ex the Reservoir Lid
Adapter to snap it in place.
NOTE: CPAP shown is for
representation purposes to
illustrate a Reservoir Lid
Adapter.
1
2
Original Lid
ADAPTER CONNECTION:
Reservoir Lid Adapter
Reservoir
Lid Adapter
Hinge Tab
Hinge Pin
A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 20A000482-11_Rev A-SC3 Manual-Setup_US-070220.indd 20 7/2/20 5:26 PM7/2/20 5:26 PM