
Step 1: Positioning the Flexi panel(s)
only one chance
Please note
Step 2: Prepare the cable
Please refer to circuit diagram and at all times observe correct polarity; POSITIVE = RED (or brown) cable; NEGATIVE = BLACK
(or blue) cable.
Note –
Step 3: Fix the cable feed gland (only for roof top kits)
Step 4: Connecting the Flexi cable to a charge controller (if supplied)
100
Technical helpline 01684 774 000
RED or BROWN = POSITIVE (+)
BLACK or BLUE = NEGATIVE (–)
CHARGE CONTROLLER
CONNECTING THE CHARGE CONTROLLER
TO A BATTERY AND A SINGLE SOLAR PANEL