SolarEdge ZigBee User manual

Contents
MAN-01-00155-1.0
1
Contents
English.................................................................................5
SolarEdge ZigBee Kit Quick Installation Guide......................5
Home Gateway User Interfaces ...................................... 6
Connectors............................................................................7
DIP Switches..........................................................................7
Configuration Button ............................................................7
LEDs ......................................................................................8
Installing the ZigBee Antenna and Slave Module........... 9
Home Gateway Installation .......................................... 11
Installation Guidelines.........................................................11
Connecting the Home Gateway ..........................................11
Verifying the Connection ....................................................12
Deutsch.............................................................................15
SolarEdge ZigBee Kit Schnellinstallationsanleitung ............15
Home-Gateway Benutzerschnittstellen........................ 16
Anschlüsse ..........................................................................17
DIP-Schalter ........................................................................17
Konfigurationstaste.............................................................17
LEDs ....................................................................................18
Installieren der ZigBee-Antenne und des Slave-Moduls19
Home-Gateway Installation .......................................... 21
Installationsrichtlinien.........................................................21
Verbinden des Home-Gateways..........................................22
Überprüfung der Verbindung..............................................23
Français.............................................................................25
Guide d’installation rapide du Kit ZigBee de SolarEdge......25
Interfaces d’utilisateur de la passerelle domestique .... 26

Contents
MAN-01-00155-1.0
2
Connecteurs........................................................................27
Commutateurs DIP..............................................................27
Bouton de configuration .....................................................27
LEDs ....................................................................................28
Installation de l’antenne et du module esclave ZigBee 29
Installation de la passerelle domestique ...................... 32
Directives d’installation.......................................................32
Connexion de la passerelle domestique..............................33
Vérification de la connexion................................................34
Italiano..............................................................................35
Guida rapida per l'installazione del kit ZigBee SolarEdge ...35
Interfaccia utente dell’home gateway esterno............. 36
Connettori...........................................................................37
DIP Switch ...........................................................................37
Pulsante di configurazione ..................................................37
LED......................................................................................38
Installazione dell'antenna ZigBee e del modulo
esterno.......................................................................... 39
Installazione dell’home gateway .................................. 42
Linee guida per l'installazione .............................................42
Collegamento dell’Home Gateway......................................43
Verifica della connessione...................................................44
Nederlandse......................................................................45
SolarEdge ZigBee Kit Installatiegids ...................................45
Gebruikerinterfaces Home Gateway ............................ 46
Aansluitingen ......................................................................47
DIP-switches........................................................................47
Configuratieknop ................................................................47
LEDs ....................................................................................48

Contents
MAN-01-00155-1.0
3
De ZigBee antenne en Slave-module installeren .......... 49
Home Gateway installatie............................................. 51
Installatie richtlijnen ...........................................................51
De Home Gateway aansluiten.............................................52
De verbinding controleren ..................................................52

SolarEdge ZigBee Kit Quick Installation Guide
MAN-01-00155-1.0
5
English
English
SolarEdge ZigBee Kit Quick
Installation Guide
This quick guide describes how to connect a SolarEdge ZigBee home
gateway and a ZigBee slave device. One slave device is supplied with
this kit. For full installation and safety details refer to the SolarEdge
Home Gateway Installation Guide and to the SolarEdge ZigBee Slave
Kit Installation Guide. Make sure you read, fully understand and
follow the detailed instructions in them prior to each installation.
Failure to do so may result in damage to the equipment and will
void its warranty.

SolarEdge ZigBee Kit Quick Installation Guide
MAN-01-00155-1.0
6
Home Gateway User Interfaces
Link LED (Yellow)
S_OK LED (Green)
Configuration Button
Signal strength LEDs
(x3, Green)
Micro-USB Port
Power LED (Green)
Ethernet Port
Antenna
DIP Switches

SolarEdge ZigBee Kit Quick Installation Guide
MAN-01-00155-1.0
7
English
Connectors
Micro-USB: Connection to the power supply. This port can also
be used for connecting to a computer for advanced
configuration or SW upgrade.
Ethernet: Connecting the SolarEdge gateway to the SolarEdge
monitoring portal through an Ethernet switch/router. The
Ethernet switch/router should be connected to the Internet.
DIP Switches
Two DIP switches are located at the side of the gateway. They are
used for internal configuration; therefore, their position should not
be changed.
Configuration Button
The configuration button is used for the following:
Discovery of slave devices and associating them to the home
gateway
Diagnosis of communication problems
►To use the configuration button:
Short press: Pressing the configuration button for 5-10
seconds and releasing it - discover slaves (device
discovery)
Long press: Pressing the configuration button for more
than 10 seconds and releasing it - start diagnostics mode

SolarEdge ZigBee Kit Quick Installation Guide
MAN-01-00155-1.0
8
LEDs
The gateway has four LED indicators, as follows:
Label and Color
Indication
Functionality*
Link (yellow)
Communication with
associated slave(s)
Blinking - There has been
ZigBee communication in
the last 15 minutes. The
LED blinks according to the
number of slaves as follows:
for each slave 0.5 second
ON and 0.5 second OFF.
This is repeated following a
5 sec. pause.
OFF - No communication
with any slave in the last 15
minutes
S_OK (green)
Connection with the
SolarEdge
monitoring portal
ON - Connection with
SolarEdge monitoring portal
is OK
OFF - Communication with
the SolarEdge monitoring
portal failed
3x Signal
strength (green)
Received Signal
Strength Indication -
Low/Medium/High
All 3 LEDs ON - High
Two LEDs ON - Medium
One LED ON - Low
Power (green)
Power
Power supply connected to
the home gateway
*
Functionality during normal operation. During device discovery and diagnostic mode, the
LEDs indicate different functionality.