Soleus Air GPS 2.0 Watch User manual

GPS 2.0 Watch Instruction Manual
Introduction
Thank you for purchasing the GPS watch. This GPS watch
is
Training features like speed, trip time, laps, etc.
GPS can display your current location
in an electronic map. Watch features include 12/24H Time format, Chronograph, World
time, 5 daily Alarms, 6 Interval Timers, Run and Run Data
m
communicate with
a PC to store and review your performance. This watch
rechargeable battery that can be charged
through USB port of your PC.
Caring for your GPS watch:
Clean your GPS watch
and heart rate monitor with a dampened cloth preferably with
mild deter
gent solution. Wipe dry using a dry cloth. Do not use chemical cleaners and
solvents that may damage plastic components.
Do not store your GPS watch to prolonged exposure to extreme temperatures as this
may result to permanent damage to your unit.
About GPS:
Global Positioning System (GPS) is a satellite-
based navigation system made up of a
network of 24 or more satellites. GPS works best in clear weather condition, anywhere
in the world, 24 hours a day. Tall buildings may interfere with GPS accuracy.
satellite signals are received, the watch will have 2D GPS fixed (Latitude and
Longitude). When 4 or more satellite signals are received, t
he watch will have 3D GPS
Fixed.
Water immersion:
This GPS watch is designed to be water resistant up to 3 ATM. It can resist water
pressure up to 30 meters. After submersion to water, please make sure to wipe dry and
air dry the unit before using or charging.
Caution: This unit is not intended to be use
d while swimming. Prolonged water
submersion may cause electronic shorting in the unit which may cause minor skin burn
or irritation.
is
packed with personal
GPS can display your current location
in an electronic map. Watch features include 12/24H Time format, Chronograph, World
m
odes. This watch can
a PC to store and review your performance. This watch
uses a
through USB port of your PC.
and heart rate monitor with a dampened cloth preferably with
gent solution. Wipe dry using a dry cloth. Do not use chemical cleaners and
Do not store your GPS watch to prolonged exposure to extreme temperatures as this
based navigation system made up of a
network of 24 or more satellites. GPS works best in clear weather condition, anywhere
in the world, 24 hours a day. Tall buildings may interfere with GPS accuracy.
When 3
satellite signals are received, the watch will have 2D GPS fixed (Latitude and
he watch will have 3D GPS
This GPS watch is designed to be water resistant up to 3 ATM. It can resist water
pressure up to 30 meters. After submersion to water, please make sure to wipe dry and
d while swimming. Prolonged water
submersion may cause electronic shorting in the unit which may cause minor skin burn
Getting Started
Step 1) Know your watch:
Push button location:
Push button Function:
S1 – Start / Lap / +
S3 – View / Enter
S5 – Stop / Save / -
S7 – Mode
S9 – GPS
S11 – Light / Set
Note: Actual color of the watch and artwork may vary from style to style.
Getting Started
Note: Actual color of the watch and artwork may vary from style to style.

Step 2) Charging the Battery:
Charge the unit for about 4.5 hours
before first use. The length of time for a fully
charged battery will last depending on the actual usage. It is recommended to regularly
re-charge your battery every 1-
2 months even if it is not used to maintain good battery
condition.
2.1) Plug your USB PC link cable to your PC
2.2)
Align the charging clip with the contacts on the back of the watch.
2.3) Connect the charging clip securely to the watch.
Note: Please thoroughly dry the charging contacts and surrounding area to ensure
proper electrical contact and prevent corrosion.
before first use. The length of time for a fully
charged battery will last depending on the actual usage. It is recommended to regularly
2 months even if it is not used to maintain good battery
Align the charging clip with the contacts on the back of the watch.
Note: Please thoroughly dry the charging contacts and surrounding area to ensure
When the battery is low,
it is time to charge the GPS watch.
you charge your watch.
Once the battery is full, it will display CHARGE
100% FULL
Battery low condition:
You cannot turn ON
the GPS when the battery is low. The watch will display
LOW
. The battery icon will blink. You need to recharge the battery in order to use the
GPS again.
When the battery is almost low and you still perform your exercise, your data may not
be sav
ed if the battery becomes low. Please make sure the battery have enough
battery power before doing your exercise in order not to lose your data.
When
the battery level becomes very low, the watch will automatica
display (blank-screen).
it is time to charge the GPS watch.
The possible screen when
100% FULL
.
the GPS when the battery is low. The watch will display
BATT
. The battery icon will blink. You need to recharge the battery in order to use the
When the battery is almost low and you still perform your exercise, your data may not
ed if the battery becomes low. Please make sure the battery have enough
battery power before doing your exercise in order not to lose your data.
the battery level becomes very low, the watch will automatica
lly turn OFF the

Step 3) Acquire Satellite signals:
T
o get the correct time of day and begin using your GPS watch, you have to acquire
GPS signals. It may take few minutes to acquire the satellite
signals.
3.1) Go outside to an open area away from tall buildings
and trees. Orient the GPS
antenna towards the sky for best reception. The antenna is located at the 6 o’clock
position of the watch.
Note:
In order to accurately navigate the GPS, you need to have a good line of
sight to the satellites.
3.2)
Stand still and do not begin moving while performing the following steps until the
GPS signals are already received.
3.3) How to Turn-ON the GPS:
Press S9 to turn ON the GPS. The watch will start
locating the satellites. After receiving the satellite
signals, it will automatically go to
RUN mode and the watch will display “GPS GO” while the “
CHRONO
3.4) How to turn OFF the GPS:
If you wish to turn OFF the GPS,
about 3 seconds and the watch will momentarily display GPS OFF
to Time view.
Note:
When GPS is ON and CHRONO is running or stop, User cannot turn OFF
GPS.
GPS signals and its meaning:
o get the correct time of day and begin using your GPS watch, you have to acquire
signals.
and trees. Orient the GPS
antenna towards the sky for best reception. The antenna is located at the 6 o’clock
In order to accurately navigate the GPS, you need to have a good line of
Stand still and do not begin moving while performing the following steps until the
Press S9 to turn ON the GPS. The watch will start
signals, it will automatically go to
CHRONO
” blinks.
If you wish to turn OFF the GPS,
press and hold S9 for
about 3 seconds and the watch will momentarily display GPS OFF
and then return
When GPS is ON and CHRONO is running or stop, User cannot turn OFF
You will hear
a beep sound when the watch has received a GPS signal or when the
GPS signal has been lost. LOST GPS signal
will also be displayed in the screen.
If no Satellite signal is received within 15 minutes, the watch will auto return to Time
mode.
Step 4) Go for a Run:
4.1) Using Run mode:
4.4.1)
Press S1 or S7 from Time mode to go to RUN mode.
4.4.2) The watch will
automatically search for GPS signal. Once the signal is
received, the watch will prompt “
GPS GO, PACE and the CHRONO time
blinks.
4.4.3) Press S1
to START or TAKE LAP. If auto lap function is set, the watch will
take lap automatically based on auto lap setting.
sound during taking of auto lap.
4.4.4) Press S5
to stop after completing your run.
4.4.5) Press & hold S5 again
to save your run data.
Note:
When the chronograph is stopped or reset, the GPS will automatically turn
OFF after 15 minutes and return to
Time mode.
4.2) Using Chronograph mode:
RUN mode and CHRONOGRAPH
mode has the same timer counter. When the
chronograph is started or stopped in RUN mode, the same thing happens in
Chronograph mode. They just diff
er in the views
chronograph,
lap time, exercise time, and distance travelled.
4.2.1) Press S1
to START or TAKE LAP. If auto lap function is set, the watch will
take lap automatically based on auto lap setting.
sound during taking auto lap.
4.2.2) Press S5
to stop after completing your run.
4.2.3) Press & hold S5
again to save your run data.
Step 5)
Download your data to PC
The watch comes with PC software to make communication between your watch and
PC easy and enjoyable. Please install the PC software to your PC using the installer
provided. The watch is using a USB PC link cable to connect the watch to PC.
a beep sound when the watch has received a GPS signal or when the
will also be displayed in the screen.
If no Satellite signal is received within 15 minutes, the watch will auto return to Time
Press S1 or S7 from Time mode to go to RUN mode.
automatically search for GPS signal. Once the signal is
GPS GO, PACE and the CHRONO time
to START or TAKE LAP. If auto lap function is set, the watch will
take lap automatically based on auto lap setting.
And there is a beep
to stop after completing your run.
to save your run data.
When the chronograph is stopped or reset, the GPS will automatically turn
Time mode.
mode has the same timer counter. When the
chronograph is started or stopped in RUN mode, the same thing happens in
er in the views
. This mode is dedicated to
lap time, exercise time, and distance travelled.
to START or TAKE LAP. If auto lap function is set, the watch will
take lap automatically based on auto lap setting.
There is also a beep
to stop after completing your run.
again to save your run data.
Download your data to PC
:
The watch comes with PC software to make communication between your watch and
PC easy and enjoyable. Please install the PC software to your PC using the installer
provided. The watch is using a USB PC link cable to connect the watch to PC.

Run the GPS PC
software on your PC. Plug the USB cable with the watch clamped in
the other end of the cable. PC software will then prompt you to download the data.
Click the download button to begin downloading. The PC software will prompt to delete
the data in the watc
h. User has the option to delete the data in the watch or not.
The PC software installation and instruction guide can be found at the end of this
manual. Please take time to read the guide.
General Operations
The watch has the following main modes: Time, Run,
Chronograph, RUN
Timer and Set modes. Press S7 to scroll through these modes.
Watch reset:
The user can reset the watch by pressing and holding S1, S5, S
7 and
simultaneously. A
ll segments will be light on, then EL backlight ON.
will be displayed. The watch will be reset. Below are the
reset views.
EL backlight:
This watch has a Night mode function.
Following are the options in
their functions:
10 SECONDS – Press S11 will turn ON the Light for 10 sec
onds
software on your PC. Plug the USB cable with the watch clamped in
the other end of the cable. PC software will then prompt you to download the data.
Click the download button to begin downloading. The PC software will prompt to delete
h. User has the option to delete the data in the watch or not.
The PC software installation and instruction guide can be found at the end of this
Chronograph, RUN
Data, Alarm,
7 and
S11
ll segments will be light on, then EL backlight ON.
The software code
reset views.
Following are the options in
SET mode and
.
20 SECONDS – Press S11
will turn ON the Light for 20 sec
NIGHT ON – Light will
continuously ON when CHRONO is running
am.
But when CHRONO is stopped or reset from 6:00 pm to 7:00 am, press any key can
turn ON the light for about 10 seconds.
TIME MODE
Following are the views with the corresponding information displayed:
Time 1 or Time2, Month, Date, City code
, Weekday
TIME 1 setting in SET mode:
You have two options in setting the watch,
GPS
can manually set the time. If you select the
automatically set based
on the data and time data from GPS satellites.
•In SET
mode, press S1 or S5 for Time setting
•Press S3 and Time 1 appears.
•Press S1 or S5 for Time 1 or Time 2 setting
•Press S3 to confirm
•Select GPS or MANUAL setting
by pressing S1 or S
GPS setting:
Select TIME ZONE by pressing S1 or S5
and then press S
36 cities to select in this time zone setting.
Select DST ON or OFF by pressing S1
or S5
Select 12H or 24H format setting by
pressing S1
Select M-D or D-M (Month/Day or Day/M
onth
Press S3
to enter and the watch will go back to Time.
will turn ON the Light for 20 sec
onds.
continuously ON when CHRONO is running
from 6:00 pm to 7:00
But when CHRONO is stopped or reset from 6:00 pm to 7:00 am, press any key can
TIME MODE
Following are the views with the corresponding information displayed:
, Weekday
and battery level indicator.
GPS
or MANUAL. In manual setting, you
can manually set the time. If you select the
GPS option, the watch will be
on the data and time data from GPS satellites.
mode, press S1 or S5 for Time setting
by pressing S1 or S
5 and then press S3 to enter.
and then press S
3 to enter. There are
or S5
and then press S3 to enter.
pressing S1
or S5. Press S3 to enter.
onth
) format setting by pressing S1/S5.
to enter and the watch will go back to Time.

MANUAL setting:
Set the HOUR by pressing S1 or S5 and then press S3
to enter.
Set the Minute by pressing S1 or S5 and then press S3
to enter.
Set the SECOND by pressing S1 or S5 and then press S3
to enter.
Set the YEAR by pressing S1 or S5 and then press S3
to enter.
Set the MONTH by pressing S1 or S5 and then press S3
to enter.
Set the DATE by pressing S1 or S5 and then press S3
to enter.
Set the 12/24H by pressing S1 or S5 and then press S3
to enter.
Select M-D or D-M
(Month/Day or Day/Month) format setting by pressing S1/S
Press S3 to enter and the watch will go back to Time.
TIME 2 setting in SET mode:
You have two options in setting the watch, GPS or MANUAL
. In manual setting, you
can manually set the time. If you select the GPS
option, the watch will be automatically
set base on the data and time data from GPS satellites.
The procedure in setting time 2 is the same with time 1 setting.
12H/24H format setting:
You can select 12H or 24H format. Press S3
to enter setting mode. Press S1 or S
select 12H or 24H format. Press S3 to confirm and exit.
RUN mode:
Press S1 or S7 from TIME mode to enter RUN mode.
Also note that if the GPS is already ON when
you enter the RUN mode, the
prompt “GPS GO, PACE and the CHRONO time blinks.
If the power level of the battery is low, the GPS cannot be turned on. The watch will
display BATT. LOW.
RUN mode Views: While CHRO is running, press & hold S3
change views (PACE, SPEED, CALORIE, CLOCK, CHRONO
and DISTANCE
(Pace views)
View 1 CHRONO/ Pace / Pace
View 2 CHRONO/ Pace / Speed
View 3 CHRONO/ Pace / Calorie
View 4 CHRONO/ Pace / Clock
View 5 CHRONO/ Pace / CHRONO
View 6 CHRONO/ Pace / Distance
(Speed views)
View 1 CHRONO/ Speed / Pace
View 2 CHRONO/ Speed / Speed
View 3 CHRONO/ Speed / Calorie
View 4 CHRONO/ Speed / Clock
View 5 CHRONO/ Speed / CHRONO
to enter.
to enter.
to enter.
to enter.
to enter.
to enter.
to enter.
(Month/Day or Day/Month) format setting by pressing S1/S
5.
. In manual setting, you
option, the watch will be automatically
to enter setting mode. Press S1 or S
5 to
you enter the RUN mode, the
watch will
If the power level of the battery is low, the GPS cannot be turned on. The watch will
will allow the User to
and DISTANCE
).
View 6 CHRONO/ Speed / Distance
(Calorie views)
View 1 CHRONO/ Calorie / Pace
View 2 CHRONO/ Calorie / Speed
View 3 CHRONO/ Calorie / Calorie
View 4 CHRONO/ Calorie / Clock
View 5 CHRONO/ Calorie / CHRONO
View 6 CHRONO/ Calorie / Distance
(Clock views)
View 1 CHRONO/ Clock / Pace
View 2 CHRONO/ Clock / Speed
View 3 CHRONO/ Clock / Calorie
View 4 CHRONO/ Clock / Clock
View 5 CHRONO/ Clock / CHRONO
View 6 CHRONO/ Clock / Distance
(CHRONO views)
View 1 CHRONO/ CHRONO / Pace
View 2 CHRONO/ CHRONO / Speed
View 3 CHRONO/ CHRONO / Calorie
View 4 CHRONO/ CHRONO / Clock
View 5 CHRONO/ CHRONO / CHRONO
View 6 CHRONO/ CHRONO / Distance
(Distance views)
View 1 CHRONO/ Distance / Pace
View 2 CHRONO/ Distance / Speed
View 3 CHRONO/ Distance / Calorie
View 4 CHRONO/ Distance / Clock
View 5 CHRONO/ Distance / CHRONO
View 6 CHRONO/ Distance / Distance
Note: If there is no key operation within 3-
4 minutes in this mode, the watch will auto
exit to Time mode.
CHRONOGRAPH mode:
Press S7 from RUN mode to enter
CHRONOGRAPH
the following in succession:


SEARCH GPS 

BATTERY level 


DATA
CHRONOGRAPH mode.
Also note that if the GPS is already ON when
you enter the RUN mode, the watch will
prompt “GPS GO, PACE and the CHRONO time blinks.
4 minutes in this mode, the watch will auto
CHRONOGRAPH mode:
CHRONOGRAPH
mode. The watch will display
DATA
TRACK MEMORY 

view 1 of
you enter the RUN mode, the watch will
prompt “GPS GO, PACE and the CHRONO time blinks.

The power level is displayed with an
increment of 10%, from 10% to 100%. In
Memory display, the watch will display the remaining hours available in Track memory.
If
the power level of the battery is low, the GPS cannot be turned on. The watch will
display BATT.LOW
VIEWS in CHRONOGRAPH mode:
View 1 GPS GO/ CHRONO/ PACE
View 2 LAP/ DISTANCE / CHRONO
View 3 LAP 1/ CHRONO/ CHRONO
When the timer is stopped
or reset in Chronograph mode, the GPS will automatically
turn OFF after 15 minutes.
RUN DATA mode
Press S7 from CHRONO mode to enter RUN DATA mode. T
he watch will display the
Data list view. In this view you can see how
many files are saved in RUN data. The
watch will show the list of data files with newest on the top of the list.
1. Press S1/S5 to scroll thru the list.
2. Press S3 to enter the selected data file. .
3. Press S1/S3 to view the details of the data file. Following
are the details available:
•Start Time / End Time / Distance
•CHRONO / Distance / Calorie
•CHRONO / Ave Pace / Max Pace
•CHRONO / Ave Speed / Max Speed
•Lap 1 / Lap time / Distance
•Lap 2 …etc….
4. Press S7 to exit
Deleting Data:
Press S7 from CHRONO mode to DATA mode. After
press S3 to enter “Start time/End time/ Distance” view.
In any sub
hold S3 to enter the “VIEW/DEL/ DEL ALL” screen
. Press S1 or S5 to select. If “VIEW”
is selected, you can view the details of the data. If “del” is selected, 1 data will be
deleted. If “Del All” is selected, all data files will be deleted.
increment of 10%, from 10% to 100%. In
Memory display, the watch will display the remaining hours available in Track memory.
the power level of the battery is low, the GPS cannot be turned on. The watch will
or reset in Chronograph mode, the GPS will automatically
he watch will display the
many files are saved in RUN data. The
watch will show the list of data files with newest on the top of the list.
are the details available:
the Data file appears,
In any sub
-views, press and
. Press S1 or S5 to select. If “VIEW”
is selected, you can view the details of the data. If “del” is selected, 1 data will be
Note: If there is no key operation within 3-4
minutes in this mode, the watch will auto
exit to Time mode.
Data numbering system/ Legend:
Following is the data numbering system.
Sample data number: D-010502-101-G
D – means Data
01 – Data number
05 - Month
02 - Day
1 - Data is referred to Time 1 or 2 for Time 2
01 - File number of the day
G - Data from GPS
Setting the User’s information:
Press S7 from ALARM mode to go to
SET mode
S5
when the USER option is highlighted. The
pressing S3 button: Gender Age Weight

Press S3
to set next parameter. Press S7 to exit.
minutes in this mode, the watch will auto
SET mode
and select USER by pressing S1 or
when the USER option is highlighted. The
sequence of setting are as follows by

Height Press S1/S5 to change values.
to set next parameter. Press S7 to exit.

TIMER mode
Setting the TIMER:
Press and hold S11 until the Timer “1” digit starts to blink
. Press S1
interval timer “SEG 1 to 6”. Press S3 to set the
hour, minute & second. Press S1
increase or decrease the value. Press S7 to exit setting.
Note: If there is no key operation within 3-
4 minutes in this mode, the watch will auto
exit to Time mode.
ALARM mode
Setting the ALARM:
Press S7 from TIMER mode to enter ALARM mode. T
he watch will display the
view. Press and hold S11 until the Alarm “1” digit starts to blink
. Press S1
the Alarm 1 to 5. Press S3 to set the hour, minute, Time, Alarm and Chime.
For Chime, press S1/S5
to turn it ON or OFF. Also note when
tone
is automatically ON and the Chime icon appears in all modes. Likewise, if
is OFF the Key tone is automatically OFF.
Alarm setting in SET mode:
•Select ALARM then press S3
•Select ALARM 1 to ALARM 5 by pressing S1/S5
and then press S
•Set the HOUR. Press S1/S5 to change values. Press S3
to enter
•Set the MINUTE. Press S1/S5 to change values. Press S3
to enter
•Set the alarm time referred to T1 or T2. Press S1/S5
to change. Press S
•Set the alarm ON or OFF. Press S1/S5 to change. Press S3
to enter
•Set the Chime ON or OFF. Press S1/S5 to change. Press S3
to enter
•Press S7 to exit alarm setting
SET mode
Press S7 from ALARM mode to SET
mode. 1.5 seconds later the watch will display the
setting options: Press S5 the ff. Sequence are as follows;
AUTO LAP,
USER, NIGHT, CONTRAST, CHIME, ALARM and TIMER
. Press S
option to set. Press S1/S5 to select then press S3 to enter.
Press S7 to exit
Time mode.
Setting the Auto Lap:
The same setting procedure applies in setting the time in
Alarm setting
Note: Alert sub-mode, press S3
to enter ALERT function. When alert is set to
will be a beep sound during taking auto lap. When it is set to
sound.
Setting the Time/ Alarm/ Timer/ User:
. Press S1
/S5 to select the
hour, minute & second. Press S1
/S5 to
4 minutes in this mode, the watch will auto
he watch will display the
alarm
. Press S1
/S5 to select
the Alarm 1 to 5. Press S3 to set the hour, minute, Time, Alarm and Chime.
to turn it ON or OFF. Also note when
Chime is ON, the Key
is automatically ON and the Chime icon appears in all modes. Likewise, if
Chime
and then press S
3 to enter.
to enter
to enter
to change. Press S
3 to enter
to enter
to enter
mode. 1.5 seconds later the watch will display the
AUTO LAP,
TIME, UNIT,
. Press S
3 to enter selected
Press S7 to exit
setting to
Alarm setting
mode.
to enter ALERT function. When alert is set to
ON, there
will be a beep sound during taking auto lap. When it is set to
OFF, there is no beep
The same setting procedure applies in setting the time in
Setting the UNIT:
Press S3 to enter. Press S1/S5 to select KM
or Mi
Setting the DISPLAY (LCD contrast):
Press S3 to enter. Press S1 or S5
to change the setting. Press S
and exit.
Setting the Chime:
Press S3 to enter. Press S1/S5 to select ON or
Setting the NIGHT mode:
Press S3 to enter. Press S1/S5 to select the f
ollowing options:
sec.
10 SECONDS – Press S11 will t
urn ON the Light
20 SECONDS – Press S11
will turn ON the Light for 20 sec
NIGHT ON – Light will
continuously ON when CHRONO is running
am. But when CHRONO is stopped or reset from 6:00 pm to 7:00 am, press any key can
turn ON the light for about 10 seconds.
Press S3
to accept the selected setting. Press S7 to exit.
Battery:
Watch is using a rechargeable Lithium Ion battery that will re
hours charging time using the USB cable. While battery is charging, the watch cannot
be used and all buttons are disabled. User needs to recharge the battery when the
watch indicates a “low battery”.
Note: Battery Life (fully charge battery); 8 hrs
min
HRM ON) in day time within the time period
from
(continues GPS with CHRONO ON, HRM ON and Light
6 pm to 7 am. This means, after 7 or 8
hours
walking, etc.
, the battery power become low and the watch will display “LOW BATT”.
GPS watch troubleshooting guide:
PROBLEM
/ QUESTION
SOLUTION/ ANSWER
How to turn off the GPS
Press and hold S9 for
turn OFF the GPS.
I cannot get a GPS signal
Take your GPS watch outdoors and away from tress
and tall buildings. Remain stationary and try acquiring
GPS signal again. Be sure that the antenna is pointing
towards the sky
Can I reset the watch?
You can reset the watch by pressing S1, S5, S7, and
S11 together. The date and time will be reset to default
The same setting procedure applies in setting the time in
Alarm setting mode.
or Mi
.
to change the setting. Press S
3 to confirm setting
OFF.
ollowing options:
Night ON, 10 sec and 20
urn ON the Light
for 10 seconds.
will turn ON the Light for 20 sec
onds.
continuously ON when CHRONO is running
from 6:00 pm to 7:00
am. But when CHRONO is stopped or reset from 6:00 pm to 7:00 am, press any key can
to accept the selected setting. Press S7 to exit.
Watch is using a rechargeable Lithium Ion battery that will re
quire approximately 4.5
hours charging time using the USB cable. While battery is charging, the watch cannot
be used and all buttons are disabled. User needs to recharge the battery when the
min
. (continues GPS with CHRONO ON,
from
7 am to 6 pm. While approx. 7 hours
(continues GPS with CHRONO ON, HRM ON and Light
ON) within the time period from
hours
continues activity such as running,
, the battery power become low and the watch will display “LOW BATT”.
SOLUTION/ ANSWER
Press and hold S9 for
about 5 seconds from any view to
turn OFF the GPS.
Take your GPS watch outdoors and away from tress
and tall buildings. Remain stationary and try acquiring
GPS signal again. Be sure that the antenna is pointing
towards the sky
for better signal reception.
You can reset the watch by pressing S1, S5, S7, and
S11 together. The date and time will be reset to default

values. You can set it again manually or automatically
thru GPS.
Will my data and personal
settings be lost after
watch reset?
Your data and personal settings are saved in the flash
memory and will not be lost after watch reset.
The battery indicator does
not seem to be accurate
Allow your GPS watch to fully discharge and then fully
charge it without interruption.
It is recommended to
regularly re-
charge your battery every 1
if it is not used to maintain good battery condition.
values. You can set it again manually or automatically
Your data and personal settings are saved in the flash
memory and will not be lost after watch reset.
Allow your GPS watch to fully discharge and then fully
It is recommended to
charge your battery every 1
-2 months even
if it is not used to maintain good battery condition.