Sonetics APX373 User manual

APX373
Electronic Headset
Quick Start Guide
[phone]
[email protected]om
Sales
[phone]
[phone]
[phone]
[email protected]
Service
[phone]
[phone]
600-3064-000 Rev E
Complete manual available at
www.soneticscorp.com
7340 SW Durham Rd.
Portland, OR 97224
Charge port
Battery door
Adjustable headband
Listen through
mute OFF (long press)
External radio
port
Listen through
mute ON (long press)
Basic features - controlsBasic features - controls
Basic features - controlsBasic features - controls
Power
Status LED
Volume Up
Volume down
Left Push to Talk
Right Push to Talk
Volume down /
Listen through volume down
Volume up /
Listen through volume up
Press both arrows to
switch between volume
and listen through
Microphone

Headset charging
Vehicle wiring
4hr 24hr
BLACK
1.5A Fuse
RED
18” MAX
Use only supplied adaptor.
Status LED functionality
On
Battery Level
Connection Status
Charge Status
Battery level and connection status are
both shown with the status LED.
Number of pulses indicates
battery charge level.
When powered on, the
color of the LED ashes
indicates connection satus.
When plugged in, the color of the
LED indicates charge state. Slow
ashing indicates a charge fault.
LED color will vary depend-
ing on connection type.
Charging
Charge fault
Fully charged
For rst use:
Connecting a 2-way radio
1: Remove ruggedizer.
3: Replace ruggedizer.
4a: Open cover and plug in. 4b: Screw on connector.
B.
C.A.
2: Cut along groove with sharp scissors.
Position mic no more than 1/8” from lips.
Mic positioning
1/8”