Motorola H790 - Headset - Monaural User manual

MOTOROLA and the Stylized M Logo are registered in the US Patent &
Trademark Office. All other product or service names are the property of
their respective owners. The Bluetooth trademark and logos are owned by
the Bluetooth SIG, Inc. and any use of such marks by Motorola, Inc. is under
license. © 2009 Motorola, Inc. All rights reserved.
68014301015
motorola.com

MOTOROLA and the Stylized M Logo are registered in the US Patent &
Trademark Office. All other product or service names are the property of
their respective owners. The Bluetooth trademark and logos are owned by
the Bluetooth SIG, Inc. and any use of such marks by Motorola, Inc. is under
license. © 2009 Motorola, Inc. All rights reserved.
68014301015
motorola H790
Quick Start Guide

1
Figure 1
7
1
6
2
4
8
3
5

2
Figure 2
Figure 3
 


English
3
Before you begin
See figure 1 on page 1.
Take a moment to familiarize yourself with your new H790 Headset.
1Charging port
2Call button
3Indicator light
4Power switch
5Microphone
6Volume buttons
7Earhook
8Ear speaker
IMPORTANT
Depending on the country in which you purchased your H790 headset,
English language Voice Prompts may be defaulted ON or OFF. If the Voice
Prompts are ON, you will hear a voice when turning on the headset and
when using it.
If you wish to change the voice prompt default setting:
With the headset turned on, press and hold either Volume button and Call
button until you hear “voice prompts on” or “voice prompts off”.
Note: Voice prompts are supported in English only.

English
4
Wearing your headset
See figures 2 on page 2.
To get the best headset performance, try out all the supplied ear cushions
to get a good fit.
Your headset comes ready for the right ear. You can change it for wear on
the left ear.
For optimal audio performance and comfort, be sure to position the ear
cushion into your ear canal and point the headset microphone towards
your mouth.
Charging your headset
See figure 3 on page 2.
Charge your headset before using it.
The indicator light is red or yellow while the battery is charging. When the
battery is fully charged, the indicator light turns green.
Note: Headset is not functional while charging.
Turning headset on & off
Slide the Power switch to the ON position (no red is shown under the switch).
The indicator light flashes blue three times, then flashes in blue and purple (if
connected with a device) or is steadily blue (if ready to be paired).
Slide the Power switch to the OFF position (red is shown under switch). The
indicator light flashes three times then turns off.

English
5
Pairing & connecting your headset
Initial pairing & connection
Once charged, let’s get your headset paired and connected to your Bluetooth
phone(s).
1. Turn off any Bluetooth devices previously paired with your headset.
2. Turn on the Bluetooth feature on your phone.
3. Put headset on your ear and turn it on. The indicator light becomes
steadily lit in blue.
4. With voice prompts ON:
• You will hear“ready to pair”.
• Follow voice prompts to connect your phone to your headset.
• When prompted for the passkey, enter 0000.
•When your headset successfully pairs with your phone, you hear “pairing
complete”. When connected, you hear “phone 1 connected” and see the
indicator light rapidly flash in blue and purple.
• OR
• With voice prompts OFF:
• Go to the Bluetooth menu on your phone and look for devices.
• Select Motorola H790.
• When your headset successfully pairs with your phone, the indicator light
flashes purple and blue and you hear two ascending tones.

English
6
Pairing & connection to 2 devices (optional)
1. Turn off first phone and any other Bluetooth devices previously paired
with your headset.
2. Turn your headset off
3. Turn on the Bluetooth feature on your phone.
4. Put headset on your ear and turn it on. The indicator light becomes
steadily lit in blue.
5. With voice prompts ON:
• You will hear“ready to pair”.
• Follow voice prompts to connect your phone to your headset.
• When your headset successfully pairs with your phone, you hear “pairing
complete”. When connected, you hear “phone 1 connected” and see the
indicator light rapidly flash in blue and purple.
• To connect to both phones, simply turn on the first phone while the second
phone is connected. When you hear “phone 2 connected”, your headset
is connected to both phones.
• OR
• With voice prompts OFF:
• Go to the Bluetooth menu on your phone and look for devices.
• Select Motorola H790.
• To connect to both phones, simply turn on the first phone while the second
phone is connected. When you hear 2 ascending tones, your headset is
connected to both phones.
Note: The last paired phone (your second phone) is now your primary phone
(or “phone 1”) for voice dial functionality regardless of voice prompts being
activated or not.

English
7
Test your connection
Place the headset on your ear and make a call from the phone(s). If your
phone(s) and headset are successfully connected, you hear ringing on the
headset.
For daily use, make sure your headset is turned on, and your phone’s
Bluetooth feature is on. Your headset and phone will connect automatically!
Using your headset
Function Action
Answer a call Press the Call button
Reject a call Press and hold a Volume button until you hear
an audio tone
Make a voice dial call Press the Call button and you hear an audio
tone
Redial last call Press and hold the Call button until you hear an
audio tone
Mute or unmute a call With voice prompts ON: Press and hold both
Volume buttons until you hear “mute on” or
“mute off”
With voice prompts OFF: Press and hold both
Volume buttons until you hear 2 ascending
tones (for mute ON) and 2 descending tones
(for mute OFF)
End a call Press the Call button
Answer a second Press the Call button
incoming call
Reject second Press and hold a Volume button until you hear
incoming call a tone