Sonic Cheer 60 User manual

www.sonici.com
Compact Power Plus BTE
User Guide
Cheer™

03
USER GUIDE CPxBTE
Table of Contents
Hearing Aid Description 7
Step-by-Step Instructions
for Using Your Hearing Aid 10
Step 1: Inserting the Battery 10
Step 2: Turning the Hearing Aid ON 12
Step 3: Inserting Your Hearing Aid 13
Step 4: Changing the Volume 17
Step 5: Changing the Programs 19
Step 6: Muting Your Hearing Aid 21
Step 7: Removing Your Hearing Aid 22
Step 8: Turning the Hearing Aid OFF 23
Step 9: Changing the Battery 23
Tamper-Resistant Battery Door (optional) 24
Features of Your Hearing Aid 25
Caring for Your Hearing Aid 27
Common Problems and Solutions 38
Accessories 40

04
SONIC
Warnings 42
International Warranty 49
Mobile Phone 51
Technical Information 53
Information and Explanation of Symbols 59

05
USER GUIDE CPxBTE
The following Sonic hearing aid models are covered
within this booklet:
Cheer 60| 40 | 20
CR60 CPx, with wireless functionality
 CR40 CPx, with wireless functionality
 CR20 CPx, with wireless functionality

06
SONIC
This booklet guides you on how to use and
maintain your new hearing aid. Please read the
booklet carefully including the warning section.
This will help you to achieve the full benefit of
your new hearing aid.
Your hearing care professional has adjusted the hearing
aid to meet your needs. If you have additional questions,
please contact your hearing care professional.
Indication for Use / Intended Purpose
The hearing aids are intended to amplify and transmit
sound to the ear and thereby compensate for impaired
hearing. The hearing aids are intended to be used by
children (> 36 months) and adults.
Important Notice
The hearing aid amplification is uniquely adjusted and
optimized to your personal hearing capabilities during
the fitting performed by your hearing care
professional.

07
USER GUIDE CPxBTE
Hearing Aid Description
There are two different attachments and several
different ear pieces which classify your hearing aid style.
Please identify your attachment and ear piece. This will
make it easier for you to navigate through this booklet.
CPx with Thin Tube
A hearing aid with a thin
tube will have one of the
following earpieces– a
dome or a Custom Mold.
CPx with Earhook
A hearing aid with an
earhook will have an
earmold as an earpiece.
Instant Fitting Custom Fitting
Open
Dome
Bass Dome,
Double Vent
Bass Dome,
Single Vent
Power Dome
Custom
Mold
Lite Tip

08
SONIC
CPx Models
Option A: with earhook
1
2a
23
4
5
6
Bernafon Veras IFU micro BTE
VR_ILU_CleaningEarmoldAttachMicroBTE_BW_HI
Bernafon Veras IFU micro BTE
VR_ILU_microBTEwithHook_BW_HI
7
1Multi Control
2Microphone
2a Second microphone
3Earhook
4Earmold tubing
5Earmold
6Battery door
7Direct Audio Input
(with an optional DAI
adapter)

09
USER GUIDE CPxBTE
CPx Models
Option B: with thin tube system
1
2a
23
4
5
6
7
Bernafon Veras IFU micro BTE
VR_ILU_microBTEwithSpira_BW_HI
89
1Multi Control
2Microphone
2a Second microphone
3Adapter
4Thin tube
5Sound outlet
6Dome (Open Dome
shown)
7Ear grip
8Battery door
9Direct Audio Input
(with an optional DAI
adapter)

10
SONIC
Step-by-Step Instructions for Using Your
Hearing Aid
Step 1: Inserting the Battery
Your hearing aid uses a size 13 battery.
·Gently swing the battery door fully open, but do not
force it (A)
·Remove the sticker from the new battery (B)
·Place the battery into the empty compartment.
The + sign on the battery should face up. (C)
✼
For maximum power, allow the battery to be aired for
30 seconds before placing it into the empty
compartment.
VR_ILU_BatteryReplacementMicroBTEin_BW_HI
Bernafon Veras IFU micro BTE
A B C

11
USER GUIDE CPxBTE
The MultiTool can be used for battery change. Use the
magnetic end to remove and insert batteries.
The MultiTool is provided by your hearing care
professional.
MultiTool
Important Notice
Your MultiTool has a built-in magnet. Keep the
MultiTool 30 cm away from credit cards and other
magnetically sensitive devices.

12
SONIC
Step 2: Turning the Hearing Aid ON
Close the battery door completely. You should notice a
click. The hearing aid is now ON.
✼
Never use excessive force to open or close the
battery door.
Click “ON”
Bernafon Veras IFU micro BTE
VR_ILU_OnOFunctionMicroBTE_BW_HI

13
USER GUIDE CPxBTE
Step 3: Inserting Your Hearing Aid
Your hearing aid has been programmed individually for
your right or left ear.
You will see a color marking inside the battery door. This
can help you to distinguish between the left and right
hearing aid.
Bernafon Veras IFU micro BTE
VR_ILU_Left-rightEarMarkingMicroBTE_BW_HI
Red = right
Blue = left

14
SONIC
Step 3a: Inserting Your Hearing Aid with an Earmold
·When inserting the right earmold, hold it with the right
hand. When inserting the left earmold, hold it with the
left hand.
·Hold the earmold so that the canal part is pointing at
the ear canal entrance and the frame of the earmold is
pointing straight up
·Insert the canal part into the ear canal aiming slightly
up and back, not straight into the ear.
Then twist back slightly to press the frame of
the earmold into the hollow part of the ear.

15
USER GUIDE CPxBTE
·Run your finger down the skin just in front of your ear. If
you feel any plastic parts of the earmold, it is not
inserted correctly. Gently push the plastic back and
behind the top fold of your ear. The earmold should seal
into all folds of the ear.
·Then tuck the hearing aid over/behind your ear, making
sure that the tubing is not twisted
✼
It takes patience and practice to insert your earmold
correctly. If you have difficulty, please consult your
hearing care professional.
VR_ILU_InsertingMicroBTEhook2_BW_HI
Bernafon Veras IFU micro BTE

16
SONIC
Step 3b: Inserting Your Hearing Aid
with a Thin Tube
·First, position the hearing aid behind your ear (A)
·Grasp the bend of the thin tube. Gently push the dome
into your ear canal until the tube rests against the side
of your head. (B)
·Push the ear grip into the bowl of your ear (C)
·If the thin tube is sticking out from your ear, insert the
dome further. If the ear grip is sticking out, it has not
been positioned correctly. Try adjusting it again.
Important Notice
If the dome is not on the tube when removed from the
ear, the dome might still be in the ear canal. Consult
your hearing care professional for further instructions.
Bernafon Veras IFU micro BTE
VR_ILU_InsertingMicroBTEspira3_BW_HI
Bernafon Veras IFU micro BTE
VR_ILU_InsertingMicroBTEspira1_BW_HI
Bernafon Veras IFU micro BTE
VR_ILU_InsertingMicroBTEspira2_BW_HI
A B C

17
USER GUIDE CPxBTE
Step 4: Changing the Volume
To increase the volume, press the upper button on the
Multi Control (a short press: less than 1 second). Repeat
until you reach the desired loudness.
To decrease the volume, press the lower button on the
Multi Control (a short press: less than 1 second). Repeat
until you reach the desired loudness.
The hearing aid will click to confirm that the volume has
been changed and then will beep when you reach the
programmed maximum or minimum. You may hear a
beep, when you return to the preset loudness level in
your hearing aid. Please ask your hearing care
professional for further information.
Short
press
Bernafon Veras IFU micro BTE
VR_ILU_MultiControlMicroBTE_BW_HI

18
SONIC
✼
Your hearing aid automatically returns to a preset
loudness level when it starts, the battery is low, or
when the program is changed. If you find that the
volume is not adequate, your hearing care professional
may need to adjust your hearing aid settings.

19
USER GUIDE CPxBTE
Step 5: Changing the Programs
A medium press (about 1 second) on either the
upper or lower button on the Multi Control will change
the program. The number of beeps you hear will tell you
which program you are in.
Medium
press
Bernafon Veras IFU micro BTE
VR_ILU_MultiControlMicroBTE_BW_HI

20
SONIC
Up to 4 listening programs can be configured by your
hearing care professional depending on your hearing aid.
Please ask your hearing care professional about the
programs that are available with your hearing aid.
Available Programs
(to be filled in by your hearing care professional)
Program Beeps Function
1 1
2 2
3 3
4 4