Sonic Celebrate Cheer miniRite User manual

www.sonici.com
Celebrate
Cheer™
miniRITE
User Guide

03
USER GUIDE MINIRITE
Table of Contents
Hearing Aid Description 07
Step-by-Step Instructions for
Using Your Hearing Aid 10
Step 1: Inserting the Battery 10
Step 2: Turning the Hearing Aid ON 12
Step 3: Inserting Your Hearing Aid 13
Step 4: Changing the Volume 16
Step 5: Changing the Programs 18
Step 6: Muting Your Hearing Aid 20
Step 7: Removing Your Hearing Aid 21
Step 8: Turning the Hearing Aid OFF 22
Step 9: Changing the Battery 22
Tamper-Resistant Battery Door (optional) 23
Features of Your Hearing Aid 24
Caring for Your Hearing Aid 25
Common Problems and Solutions 32
Accessories 34

04
SONIC
Warnings 36
International Warranty 43
Mobile Phone 45
Technical Information 47
Information and Explanation of Symbols 51

05
USER GUIDE MINIRITE
The following Sonic hearing aid models are covered
within this booklet:
Celebrate 100|80
CL100 MNR, with wireless functionality
 CL80 MNR, with wireless functionality
Cheer 60| 40
CR60 MNR, with wireless functionality
 CR40 MNR, with wireless functionality

06
SONIC
This booklet guides you on how to use and
maintain your new hearing aid. Please read the
booklet carefully including the warning section.
This will help you to achieve the full benefit of
your new hearing aid.
Your hearing care professional has adjusted the hearing
aid to meet your needs. If you have additional questions,
please contact your hearing care professional.
Indication for Use / Intended Purpose
The hearing aids are intended to amplify and transmit
sound to the ear and thereby compensate for impaired
hearing. The hearing aids are intended to be used by
children (> 36 months) and adults.
Important Notice
The hearing aid amplification is uniquely adjusted and
optimized to your personal hearing capabilities during
the fitting performed by your hearing care
professional.

07
USER GUIDE MINIRITE
Hearing Aid Description
There are several earpieces that can be attached to the
speaker unit on your hearing aids. Please identify your
earpiece. This will make it easier for you to navigate
through this booklet.
A miniRITE can come with a 60-Speaker, an 85-Speaker,
or a 100-Speaker and different earpieces.
A dome or a Custom
Mold can be
attached to the
60-Speaker
A dome or a Custom
Mold can be
attached to the
85-Speaker
A dome or a Power
Mold can be
attached to the
100-Speaker
7JU_ILLU_PR_60_Speaker_BW
8JU_ILLU_PR_85_Speaker_BW
9JU_ILLU_PR_100_Speaker_BW
Instant Fitting Custom Fitting
Open
Dome
Bass Dome
Double Vent
Bass Dome
Single Vent
Power
Dome
Custom
Mold
Lite
Tip
Power
Mold

08
SONIC
miniRITE Model
Option A: with speaker unit and dome
2JU_ILLU_PR_85_Speaker_No_Dome_front_BW
1
2a
24
5
6
9
7
8
3
10
1Push button
2Microphone
2a Second microphone
3Connector plug
4Wire
5Left/right indicator
6 Speaker
(85-Speaker shown)
7 Speaker unit size
marking
8 Battery door
9 Dome
(Open Dome shown)
10 Wax filter

09
USER GUIDE MINIRITE
Option B: with speaker unit and custom mold
22 JU_ILLU_PR_85_Speaker_MicroMold_front_BW
2a
2
3
4
5
9
1
6
8
7
1Push button
2Microphone
2a Second microphone
3Connector plug
4Wire
5Left/right indicator
6 Speaker
(85-Speaker shown)
7Pull out cord
8Battery door
9Custom mold
(Lite Tip shown)

10
SONIC
Step-by-Step Instructions for Using Your
Hearing Aid
Step 1: Inserting the Battery
·Gently swing the battery door fully open,
but do not force it (A)
·Remove the sticker from the new battery (B)
·Place the battery into the empty compartment.
The + sign on the battery should face up. (C)
✼
For maximum power, allow the battery to be aired for
30 seconds before placing it into the empty
compartment.
24 JU_ILLU_PR_InsertBattery2_BW
23 JU_ILLU_PR_InsertBattery1_BW
A B C

11
USER GUIDE MINIRITE
The MultiTool can be used for battery change.
Use the magnetic end to remove and insert batteries.
The MultiTool is provided by your hearing care
professional.
Important Notice
Your MultiTool has a built-in magnet. Keep the
MultiTool 30 cm away from credit cards and other
magnetically sensitive devices.
MultiTool

12
SONIC
Step 2: Turning the Hearing Aid ON
Close the battery door completely. You should notice a
click. The hearing aid is now ON.
✼
Never use excessive force to open or close the
battery door.
Click “ON”
25 JU_ILLU_PR_TurnHearingAidON_BW

13
USER GUIDE MINIRITE
Step 3: Inserting Your Hearing Aid
Your hearing aid has been programmed individually for
your right or left ear.
You will see a color marking inside the battery door. This
can help you to distinguish between the left and right
hearing aid.
35 JU_ILLU_PR_Colormarking_CMYK
Red = right
Blue = left

14
SONIC
·Make sure the dome is pushed firmly onto the speaker
·Position the hearing aid behind your ear (A)
·Grasp the speaker between your thumb and index
finger. The dome or custom mold should point towards
the ear canal opening.
·Gently push the speaker into your ear canal, until the
wire sits flush against the side of your head (B)
·If you have an ear grip attached to the speaker, push the
ear grip into the bowl of your ear. If the ear grip is
sticking out, it has not been positioned correctly. Try
adjusting it again. (C)
When looking in the mirror, the speaker should be
difficult to see.
26 JU_ILLU_PR_InsertHearingAid_BW
A

15
USER GUIDE MINIRITE
CB
Important Notice
If the dome is not on the speaker when removed from
the ear, the dome might still be in the ear canal.
Consult your hearing care professional for further
instructions.
✼
Never insert the speaker in the ear canal without the
dome attached. Do not force the speaker too deeply
into your ear canal. Do not apply any lubrication to the
earpiece as this may damage the speaker.

16
SONIC
Step 4: Changing the Volume
Your hearing aids are programmed to be at a
comfortable volume level for your hearing loss. They are
designed to automatically adjust to changes in the sound
environment.
If you have purchased an optional remote control or
SoundGate accessory, you can use it to make small
volume changes to get a natural and comfortable sound.
Please ask your hearing care professional for further
information on optional accessories.

17
USER GUIDE MINIRITE
✼
Your hearing aid automatically returns to a preset
loudness level when it starts, the battery is low, or
when the program is changed. If you find that the
volume is not adequate, your hearing care professional
may need to adjust your hearing aid settings.

18
SONIC
Step 5: Changing the Programs
A short press (about 1 second) on the Push Button will
cause the listening program to change. You will hear the
same number of beeps as the program you are in each
time you push the button. When you turn the hearing aid
off and then on, it will automatically return to your
default listening program (program 1).
2JU_ILLU_PR_85_Speaker_No_Dome_front_BW
Push
button
Bernafon Veras IFU micro BTE
VR_ILU_MultiControlMicroBTE_BW_HI

19
USER GUIDE MINIRITE
Up to 4 listening programs can be configured by your
hearing care professional depending on your hearing aid.
Please ask your hearing care professional about the
programs that are available with your hearing aid.
Available Programs
(to be filled in by your hearing care professional)
Program Beeps Function
1 1
2 2
3 3
4 4

20
SONIC
Important Notice
Do not use the mute function as an off switch, as the
hearing aid still draws from the battery in this mode.
Step 6: Muting Your Hearing Aid
Your hearing aid may have the mute function. Please ask
your hearing care professional if this function is available
with your hearing aid.
A long press (about 2 seconds) on the push button will
cause your hearing aid to mute.
To un-mute the hearing aid, give any control on the
hearing aid a push.
2JU_ILLU_PR_85_Speaker_No_Dome_front_BW
Push
button
Bernafon Veras IFU micro BTE
VR_ILU_MultiControlMicroBTE_BW_HI