Soniq E65uv40a User manual

E65UV40A

65’’ UltraHD LED LCD TV

-1-

CONTENTS

CAUTION ............................... ........................ ........... ............ ........ 2

........................................................................................ 5

CONTROL BUTTON ....................................................................................... 6

TERMINAL .................................................................................................... 7

......... .......................................................................8

SPECIFICATIONS ......................................................................................... 15

SIMPLE TROUBLESHOOTING ..................................................................... 16

............ . .. .

STAND ASSEMBLY

.......... . .... .................................................................................. 4

ACCESSORY

REMOTE CONTROLLER

.......... ... ... .......................................................................10

MENU OPERATION

.............. ... ... .......................................................................14

MAIN LAUNCHER

-2-

CAUTION

-6-

CONTROL BUTTON

: Standby or switch on the TV.

-(CH/VOL)+: hort press to change channel, long press to adjust sound volume.

CH+/-: Selecting channel.

+/-: Adjusting volume.

OK : OK key and menu key function reuse, short press for OK function, long press for

menu function

External signal input selection.

Note:

The following is only functional schematic, And the actual position and arrangement of differect

models may be different. Some models has 5 buttons, some models has 7 buttons.

-7-

TERMINAL

The LED TV has many multimedia functions. It can be connected to many types of equipment.

The following paragraph shows how to connect to other Audio and Video devices.

VGA

cab le

Co m po sit e

cab le

Com p onent

cab le

HDMI

cab l

able TV

ompany

VHF/UHF

antenna

able re eiver/satellite box

Headphones

RF Coaxia

cab l e

A ud io

cab le

Optical input

SONIQ does not supply

these cables.

DIGITAL

AUDIO OUT

(OPTICAL)

1 2 (ARC )

-8-

REMOTE CONTROLLER

Open the battery cover and insert 2 "AAA" batteries.

Point the remote control at the remote sensor located

on the unit.

When there is a strong ambient light source,

the performance of the infrared remote sensor may be

degraded, causing unreliable operation.

The recommended effective distance for remote is

about 16 feet (5 meters).

When the batteries become weak and the operating

distance of the remote control is greatly reduced, you

will need to replace the batteries.

If the remote control is not going to be used for a long

period of time, remove the batteries to avoid damage

caused by battery leakage or corrosion.

Do not mix old and new batteries or ALKALINE or

standard (CARBON-ZINC) or rechargeable

(NICKEL-CADMIUM) batteries.

Always remove batteries as soon as they become weak.

Weak batteries can leak and severely damage the

remote control.

Do not dispose of batteries in fire, they may explode

or leak.

Batteries should not be exposed to excessive heat such

as sunshine, fire or the like.

CAUTION :

Danger of explosion may occur if

battery is incorrectly replaced.

The remote controller cannot be used unless it is within the receivable range. Before you

use the remote control, please make sure there's no obstacle between the remote control

and the receiver.

Channel Selection

CH /CH buttons on the main unit or on the remote control repeatedly

to select the channel.

0-9 buttons on the remote control to select the channel directly.

VOL+/- buttons on the main unit or on the remote control to adjust the

volume.

MUTE button again or the VOL+

button to resume the sound.

MENU OPERATION

PICTURE Mode:Choose the picture menu with left andright keys. Then the up and

downarrows can be used to select this item.The picture mode can be switched

tostandard/dynamic/mild/userthrough right key.

Contrast/Brightness/Color/Tint/Sharpness:Everyone looks at the color

feeling is different, here can debug, After pressing OK, debug by pressing

left and right keys.Color Temperature:Select the color temperature that you feel comfortable.

Noise Reduction: Reduces the picture noise in a weak broadcast signal.

HDMI Mode:

PICTURE

Programme Edit: Press ok to enter and edit the channel according to the color

suggestion function.

Auto Tuning: Press the ENTER button to start Auto tuning which

automatically scan and store all available programmes.

ATV Manual Tuning:

Manual store for ATV channels.

DTV Manual Tuning:

Manual store for DTV channels.

Available in the HDMI input source.

MENU OPERATION

Sound Mode: You can select a sound mode to suit your personal preferences.

five-stage equalization setting can be adjusted when the sound mode is

set to Use r.

Treble:Adjust the high frequency sounds.

Bass:Adjust the low frequency sounds.

Balance: Adjust the level of sound coming from the left and right speakers.

Auto Volume: Auto Volume automatically remains on the same level of volume, if

youchange programmes. Because each broadcasting station has its own signal

conditions, volume adjustment may be needed every time when the channel is

changed. This feature allows users to enjoy stable volume levels by making

SPDIF Mode: Select to O ff / PCM / Auto the SPDIF Mode.

Clock: Off Time:Timing shutdown. ON Time:Timing boot.Edit the time of the TV.

Sleep Timer:Sleep Timer swiches the TV to standby after a defined period of

time.To cancel the Sleep Timer, set to "Off ".

Auto Sleep:Select the time in hours (off, 3H, 4H, 5H) that you want the TV to

remain on after your last operation, Cancel by setting it to Off.

OSD Timer:Select the time in seconds (5s, 10s, 30s,) that you

wantthe On-Screen Menu remain display after your last operation.

SOUND

TIME

ADS Switch:

automatic adjustments for each program.

Sleep Timer: Sleep Timer swiches the TV to standby after a defined period of time.

To cancel the Sleep Timer, set to "Off ".

MENU OPERATION

The function is for the ones who has bad eyesight. Some scenes

in some code.

OPTLON

LOCK

OSD Language: Select your preferred On Screen Display language.

TT Language :Press ź/Ÿto select TT Languages, then press the OK button to enter sub-menu.

Scale: You can select the picture size which best corresponds to your viewing requirements.

Blue Screen: Select On / Off the Blue Screen.

Key Lock: Lock or unlock the key panel buttons on the TV.

Reset: Recall the default setting.

Software Update(USB): Press

źŸ

button to Software Update then press

źŸ

button to

select On or Off.

MENU OPERATION

Press MENU button to display the main menu.

Press / button to select LOCK in the main menu, it will highlight the first option.

Press OK button and input pasword (the default password is 0000 ) to enter the sub-title , and

press / to adjust

Hotel Mode:This feature is used to restrict user access to some TV features and to modify TV Settings.

-14 -

MAIN LAUNCHER

The USB storage devices should beinserted into the terminal.

Select the Media(or USB) source and view the multimedia.

Select the multimedia and press the [ OK ] button to enter.

In the play interface, according to the menu display operation (Ifthe menu has

disappeared, you can press the [ OK ] button).

-15-

SPECIFICATIONS

150W

RF IN RF IN

480i, 480p, 576i,576p, 720p, 1080i, 1080p, 4K2K

(42MHz ~ 230MHz)

480i, 480p, 576i,576p, 720p, 1080i, 1080p

AV IN x 1

AV IN

10W 10W

USB USB x 2

(474MHz ~ 862MHz)

3840x 2160

5000

1428(H) x 804(V)

1415mm(L) x 250mm(W) x 903(H)mm

290

~100-240V AC , 50/60Hz

If the display fails or the performance dramatically changes, check the display in accordance with the following instructions. Remember to check the peripherals to pinpoint the source of the failure. If the display still fails to perform as expected, contact the dealer for assistance.

No PowerNo SoundRemote notrespondingSymptomDEALING METHODTV set needs to becleanedAbnormal ColorCheck the power connection.Pull the plug out, wait for 60 seconds, then reconnect the power and turn on the set.Increase the volume. Check if the set is on the mute state or not. Check the voice setting condition. Check the voice mode setting condition.Check the effect of the batteries. If necessary, replace thebatteries or clean the remote control sensor window. The distance between the set and the remote control should be less than 6 meters.Check the antenna connection.Please pull the plug out when cleaning the screen. Use a soft, clean cloth to wipe it off. If needed to clean further, please use dry cloth, do not use naphtha or other thinners liquids.

SIMPLE TROUBLESHOOTING

-16-System Error(For Smart TV only) ● ● ● Retry current operation.Enter the home page, and select "Restore Factory Setting" in the menu of System Setting. Do not cut off power during restore period.Power off, then restart.