SONIQ E55UV80A User manual

E55UV80A
55 UltraHD LED LCD TV

-1-
CONTENTS
CAUTION ............................... ........................ ........... ............ ........ 2
........................................................................................ 5
CONTROL BUTTON ....................................................................................... 6
TERMINAL .................................................................................................... 7
......... .......................................................................8
SPECIFICATIONS ......................................................................................... 15
SIMPLE TROUBLESHOOTING ..................................................................... 16
............ . .. .
STAND ASSEMBLY
.......... . .... .................................................................................. 4
ACCESSORY
REMOTE CONTROLLER
...... .... ... ... .......................................................................10MENU OPERATION
...... .... .... ... ... .......................................................................14
MAIN LAUNCHER

-2-
CAUTION

E55UV80A
55 UltraHD LED LCD TV
6PCS Ø4-BM
Instruction Manual
E55UV80A
www.soniq.com printed in China
55 UltraHD LED LCD TV

This TV is equipped with mounting holes of 200 x 200mm.If the thickness of the wall mount is 2mm,
4PCS of type M6 x 10mm screws are required (the length of the screws fixed in the interior of the TV
should not be longer than 12mm) Recommend to use SONIQ wall mount and install by professional
people (do not operate while the TV is on).
Screws: Ø4-BM (x6)
200
A
A
B
BMAX 12mm MAX 10mm
B B

-6-
CONTROL BUTTON

-7-
TERMINAL
The LED TV has many multimedia functions. It can be connected to many types of equipment.
The following paragraph shows how to connect to other Audio and Video devices.
USB
Com po nent
cab le
HDMI
cab le
cable TV
company
VHF/UHF
antenna
cable receiver/satellite box
Headphones
RF Coaxia
l
cabl e
Optical input
SONIQ does not supply
these cables.

-8-
REMOTE CONTROLLER
The remote controller cannot be used unless it is within the receivable range. Before you
use the remote control, please make sure there's no obstacle between the remote control
and the receiver.
Note:
USB/SD/3D/DVD/TITLE/PBC/SETUP/D.DIS/ / are invalid.

Channel Selection
CH /CH buttons on the main unit or on the remote control repeatedly
to select the channel.
0-9 buttons on the remote control to select the channel directly.
VOL+/- buttons on the main unit or on the remote control to adjust the
volume.
MUTE button again or the VOL+
button to resume the sound.
OK
OK
9
MENU OPERATION

PICTURE Mode:Choose the picture menu with left andright keys. Then the up and
downarrows can be used to select this item.The picture mode can be switched
tostandard/dynamic/mild/userthrough right key.
Contrast/Brightness/Color/Tint/Sharpness:Everyone looks at the color
feeling is different, here can debug, After pressing OK, debug by pressing
left and right keys.
Color Temperature:Select the color temperature that you feel comfortable.
Noise Reduction: Reduces the picture noise in a weak broadcast signal.
HDMI Mode:
PICTURE
Programme Edit: Press ok to enter and edit the channel according to the color
suggestion function.
Auto Tuning: Press the ENTER button to start Auto tuning which
automatically scan and store all available programmes.
ATV Manual Tuning: Manual store for ATV channels.
DTV Manual Tuning: Manual store for DTV channels.
Available in the HDMI input source.
10
MENU OPERATION

Sound Mode: You can select a sound mode to suit your personal preferences.
five-stage equalization setting can be adjusted when the sound mode is
set to Use r.
Treble:Adjust the high frequency sounds.
Bass:Adjust the low frequency sounds.
Balance: Adjust the level of sound coming from the left and right speakers.
Auto Volume: Auto Volume automatically remains on the same level of volume, if
youchange programmes. Because each broadcasting station has its own signal
conditions, volume adjustment may be needed every time when the channel is
changed. This feature allows users to enjoy stable volume levels by making
SPDIF Mode: Select to O ff / PCM / Auto the SPDIF Mode.
Clock:Edit the time of the TV.
Sleep Timer:Sleep Timer swiches the TV to standby after a defined period of
time.To cancel the Sleep Timer, set to "Off ".
Auto Sleep:Select the time in hours (off, 3H, 4H, 5H) that you want the TV to
remain on after your last operation, Cancel by setting it to Off.
OSD Timer:Select the time in seconds (5s, 10s, 30s,) that you
wantthe On-Screen Menu remain display after your last operation.
SOUND
TIME
ADS Switch:
automatic adjustments for each program.
MENU OPERATION
The function is for the ones who has bad eyesight. Some scenes
in some code.
11

OPTLON
LOCK
OSD Language: Select your preferred On Screen Display language.
12
TT Language :Press / to select TT Languages, then press the OK button to enter sub-menu.
Scale: You can select the picture size which best corresponds to your viewing requirements.
Blue Screen: Select On / Off the Blue Screen.
Key Lock: Lock or unlock the key panel buttons on the TV.
Reset: Recall the default setting.
Software Update(USB): Press button to Software Update then press button to
select On or Off.
MENU OPERATION
Press MENU button to display the main menu.
Press / button to select LOCK in the main menu, it will highlight the first option.
Press OK button and input pasword (the default password is 0000 ) to enter the sub-title , and
press / to adjust

-13 -
MAIN LAUNCHER
The USB storage devices should beinserted into the terminal.
Select the Media(or USB) source and view the multimedia.
Select the multimedia and press the [ OK ] button to enter.
In the play interface, according to the menu display operation (Ifthe menu has
disappeared, you can press the [ OK ] button).

-14-
SPECIFICATIONS
1680x1050 65.3 60
1920x1080(RGB-PC) 66.587 59.93 VESA
1920x1080(HDMI-PC)
3840x2160(HDMI-PC)
67.5 60
67.5 30
VESA
Video System
Audio System MPEG1, layer1
150W
RF IN RF IN
480i, 480p, 576i,576p, 720p, 1080i, 1080p, 4K2K
(42MHz ~ 230MHz)
MPEG-2MP@ML
AV IN x 1
3
AV IN
W 8W
USB USB x 2
YPbPr YPbPr x 1
(474MHz ~ 862MHz)
3840x 2160
5000
1209.6(H) x 680.4(V)
1244mm(L) x 728mm(W) x 245(H)mm
250
~220-240V AC , 50/60Hz
8

If the display fails or the performance dramatically changes, check the display in
accordance with the following instructions. Remember to check the peripherals to
pinpoint the source of the failure. If the display still fails to perform as expected,
contact the dealer for assistance.
No Power
No Sound
Remote not
responding
Symptom DEALING METHOD
TV set needs to be
cleaned
Abnormal Color
Check the power connection.Pull the plug out, wait for 60 seconds,
then reconnect the power and turn on the set.
Increase the volume. Check if the set is on the mute state or not.
Check the voice setting condition. Check the voice mode setting
condition.
Check the effect of the batteries. If necessary, replace the
batteries or clean the remote control sensor window. The distance
between the set and the remote control should be less than 6 meters.
Check the antenna connection.
Please pull the plug out when cleaning the screen. Use a soft, clean
cloth to wipe it off. If needed to clean further, please use dry cloth,
do not use naphtha or other thinners liquids.
SIMPLE TROUBLESHOOTING
- -
System Error
(For Smart TV only)
Retry current operation.
Enter the home page, and select "Restore Factory Setting" in the
menu of System Setting. Do not cut off power during restore period.
Power off, then restart.
15

AUSTRALIA : www.soniq.com/au/contact-us
NEW ZEALAND : www.soniq.com/nz/contact-us