Sonmez Tent SMZ60 User manual

SAFETY AIR
CUSHION
Saves Lives!

www . ten t . c om . tr
SAFETY AIR
CUSHION
OPERATING MANUAL
SMZ60
OPERATING
MANUAL

SMZ60
www . ten t . c om . tr
CONTENTS
SAFETY AIR CUSHION
1.Instructions
2.Description of Safety Air Cushion
2.1 General
2.2 Specifications
3.Handling
3.1 Installation
3.2 Un-Installation
4.Maintenance and Storage
4.1 After use
4.2 Annual Check
4.3 Cleaning
4.4 Documentation
4.5 Storage

SMZ60
www . ten t . c om . tr
INSTRUCTIONS
SAFETY AIR CUSHION
1.Instructions
Read the instructions carefully before using this equipment.
This equipment by jumping into from high rise buildings in emergency.
Use it only after inflate perfectly.
When you install this equipment , Please remove any keen things.
One jump one person only.
2.Description of Safety Air Cushion
2.1 General
This
from high rise buildings in emergency.
equipment is the fire escape device by jumping into the cushion
Dam-proof, anti-acid, great resistance in tearing and abrasion,
provides them with highest safety level of the products.
This equipment is quickly inflated with only a small amount of air.
This can be huge and protect escapers safely.
When a falling rescuee is hitting the drop point of the cushion, the
construction will deform and the pressed air in the octagon is escaping
through the relief holes, this is the way to absorb sudden shocks.
After one escaper has been out from
will automatically erect itself and can be used again for
rescuing persons.
this equipment, this equipment

SMZ60
www . ten t . c om . tr
SPECIFICATIONS
SAFETY AIR CUSHION
2.1 Specifications
1Electric Fan.
2Air Inlet.
3Bottom Chamber.
4Top Chamber.
5Ventilation Window.
6Safety Instructions & Repair Kit.
7Reflect Band.
8Drop Point.
9
Zipper.
10 Moving Handles.
Person(s) needed to operation ≥ 3
Dimensions (after installation) 8.5X 6.5 X 2.5 (m)
Ground Required ≥ 9.0 X 9.0 (m)
Weight (include Fans) 166 Kg
Install time ≤ 120 sec.
Recovery time ≤ 20 sec.
Max. height for use ≤ 60 m
1
2
3
4
5
7
8
9
10
6

SMZ60
3.1 Installation
www . ten t . c om . tr
HANDLING
SAFETY AIR CUSHION
1) Check the . power and 2 fans
2) Carry this equipment to the area where you want to install.
the area need at least .9.0m X 9.0m for installation
3) Unfold the equipment in the place.
4) Connect the fans to the air injection ducts of this equipment.
5) Operating generator and turn on the switch of fans.
6) This equipment will install itself and fully erect.
7) After
be moved to where it needed.
the equipment fully erect, then ready for use and can
3.2 Un-installation
1) After rescue, turn off the fans and generator.
2) Separate the fans.
3) After airs are deflated, fold it according to folding method.
4) Carry the equipment away to clean area.
5) Re-fold the equipment as before unfold.
3.Handling

SMZ60
www . ten t . c om . tr
MAINTENANCE
STORAGE
SAFETY AIR CUSHION
To clean this equipment only warm water (Max.40℃) can be used with a
regular detergent. before packing this equipment should be fully dried.
This equipment should be checked by an authorized institute and this is to
be noted in the inspection report.
1) When Th
and clean and dry it.
is equipment not been used, unpacking this equipment
2) The Cylinder must be filled immediately for next time.
3) Check it carefully, if this equipment is no tore or no burned.
4.1 After Use
4.Maintenance and Storage
4.2 Annual Check
4.3 Cleaning
4.5 Storage
Always keep in dry place for re-using.
4.4 Documentation
Every training, check, repair and every use should be documented in the
documentation report. Annual inspections, rep airs and inspection after a
rescue jump should be separately documented in the inspection report.

CHOOSE
THE EXPERİENCE
SAFETY AIR CUSHION
www.t e n t . com . tr