Sony Ericsson T616UG User manual

MobilePhoneT616

Contents 1
Contents
Getting to know your phone 4
Key functions, quick keys, entering letters.
Personalizing your phone 17
Download settings or choose from the phone.
Calling 25
Use the Phonebook, voice control, call options.
Messaging 45
Multimedia messaging, chat and email.
Camera 54
Use the camera.
Setting up mMode and Email 58
All you need to know about setting up your browser and
email.
Using Your Browser 65
Your browser, bookmarks.
Transferring and exchanging information 68
Bluetooth wireless technology, synchronization.
More features 72
Calendar, alarm clock, stopwatch, timer, games.
Security 80
SIM card lock, phonelock.
Troubleshooting 82
Why doesn’t the phone work the way I want?
Additional information 84
Safe and efficient use, warranty, declaration of conformity.
Icons 92
What do the icons mean?
Index 98
T616UG-R2.book Page 1 Monday, August 4, 2003 10:19 AM

2 Contents
Sony Ericsson
First edition (June 2003)
This manual is published by Sony Ericsson Mobile
Communications AB, without any warranty.
Improvements and changes to this manual
necessitated by typographical errors, inaccuracies
of current information, or improvements to programs
and/or equipment, may be made by Sony Ericsson
Mobile Communications AB at any time and without
notice. Such changes will, however, be incorporated
into new editions of this manual.
All rights reserved.
©Sony Ericsson Mobile Communications AB, 2003
Publication number: AE/LZT 123 7547 R1
Please note:
Some oftheservices in this manual are notsupported
by all networks. This also applies to the GSM
International Emergency Number 911 or 112.
Please contact your network operator or service
provider if you are in doubt whether you can use
a particular service or not.
Please read the Guidelines for safe and efficient use
and the Limited warranty chapters before you use
your mobile phone.
The BLUETOOTH trademarks are owned by
Bluetooth SIG, Inc.
T9™ Text Input is a trademark or a registered
trademark of Tegic Communications.
T9™ Text Input is licensed under one or more of the
following: U.S. Pat. Nos. 5,818,437, 5,953,541,
5,187,480, 5,945,928, and 6,011,554; Canadian Pat.
No. 1,331,057, United Kingdom Pat. No. 2238414B;
Hong Kong Standard Pat. No. HK0940329; Republic
of Singapore Pat. No. 51383; Euro.Pat. No. 0 842
463(96927260.8) DE/DK, FI, FR, IT, NL, PT, ES, SE,
GB; and additional patents are pending worldwide.
Java and all Java based trademarks and logos are
trademarks or registered trademarks of Sun
Microsystems, Inc. in the U.S. and other countries.
End-user license agreement for Sun™ Java™
J2ME™.
1. Restrictions: Software is confidential copyrighted
information of Sun and title to all copiesis retained by
Sun and/or its licensors. Customer shall not modify,
decompile, disassemble, decrypt, extract, or
otherwise reverse engineer Software. Software may
not be leased, assigned, or sublicensed, in whole or
in part.
T616UG-R2.book Page 2 Monday, August 4, 2003 10:19 AM

Contents 3
2. Export Regulations: Software, including technical
data, is subject to U.S. export control laws, including
the U.S. Export Administration Act and its associated
regulations, and may be subject to export or import
regulations in other countries. Customer agrees to
comply strictly with all such regulations and
acknowledges that it has the responsibility to obtain
licenses to export, re-export, or import Software.
Software may not be downloaded, or otherwise
exported or re-exported (i) into, or to a national or
resident of, Cuba, Iraq, Iran, North Korea, Libya,
Sudan, Syria (as such listing may be revised from
time to time) or any country to which the U.S. has
embargoed goods; or (ii) to anyone on the U.S.
Treasury Department's list of Specially Designated
Nations or the U.S. Commerce Department's Table of
Denial Orders.
3. Restricted Rights: Use,duplication or disclosure by
the United States government is subject to the
restrictions as set forth in the Rights in Technical Data
and Computer Software Clauses in DFARS 252.227-
7013(c) (1) (ii) and FAR 52.227-19(c) (2) as
applicable.
Part of the software in this product is copyright ©
SyncML initiative Ltd. (1999-2002). All rights
reserved.
Other product and company names mentioned herein
may be the trademarks of their respective owners.
Any rights not expressly granted herein are reserved.
T616UG-R2.book Page 3 Monday, August 4, 2003 10:19 AM

4 Getting to know your phone
Getting to know your phone
About this user’s guide
The “Getting to know your phone” chapter gives a
quick overview of the main functions of the phone,
shortcuts and general information.
More information and downloads are available at
www.SonyEricsson.com/ or wap.SonyEricsson.com/
Available services
Some services and functions described in this user’s
guide are network or subscription-dependent, which
means that all menus may not be available in your
phone.
This symbol indicates that a service or
function is network or subscription-
dependent.
Please consult your network operator for
more information about your subscription.
Assembly
Before you can use your phone you need to:
• Insert the SIM card.
• Attach and charge the battery. See “SIM card and
battery information” on page 5.
Note: Always turn off the phone and detach the
charger before you insert or remove a SIM card.
The SIM card
When you register as a subscriber with a network
operator, you get a SIM (Subscriber Identity Module)
card. The SIM card contains a computer chip that
keeps track of your phone number, the services
included in your subscription, and your Phonebook
information, among other things.
Tip: Check if your information is saved to the SIM
card before you remove it from another phone. For
example, Phonebook entries may be saved in the
phone memory.
T616UG-R2.book Page 4 Monday, August 4, 2003 10:19 AM

Getting to know your phone 5
SIM card and battery information
It may take up to 30 minutes before an icon
appears when charging.
1. Insert the SIM card. Slide the metal holder over the
SIM card to lock it in place.
2. Place the battery on the back of the phone with the
label side up.
3. Place the back cover as shown in the picture and
slide it into place.
4. Connect the charger to the phone at the flash symbol
( ). The flash symbol on the charger plug must face
upwards.
5. It may take up to 30 minutes before the battery
charging icon appears in the display.
6. Wait approximately 4 hours or until the icon
indicates that the battery is fully charged. If you do
not see the battery icon after this time, press any key
or the joystick to activate the display.
7. Remove the charger by tilting the plug upwards.
Note: You have to insert the SIM card and charge
the battery before you can use the phone.
ab
3
0 min.
4
h.
T616UG-R2.book Page 5 Monday, August 4, 2003 10:19 AM

6 Getting to know your phone
Turning the phone on
To turn on the phone
Press and briefly hold the on/off button on the top of
the phone.
Note: When you turn on the phone it takes up to 40
seconds to begin operating.
Note: If your service provider requires the use of a
PIN (Personal Identity Number), then the PIN:
screen noted above will appear, and you will find the
default PIN in the collateral material developed by
your service provider. Otherwise, the PIN: screen
will not appear, and the standby screen will be
displayed.
When you enter your pin, the digits will be masked
with an asterisk (*). Do not choose emergency
numbers for your PIN because emergency numbers
are not masked. Some number sequences may not be
hidden because they could be part of an emergency
number sequence.
Note: If you enter the wrong PIN three times in a
row, the SIM card is blocked and the message "PIN
blocked" appears. To unblock it, you need to enter
your PUK (Personal Unblocking Key). Your PUK is
provided by your network operator.
To turn off the phone
Press and hold the on/off button at the top of the phone.
on/off
Wel
T616UG-R2.book Page 6 Monday, August 4, 2003 10:19 AM

Getting to know your phone 7
Navigating the menus
The main menus are shown as icons on the desktop.
To go to the desktop, press the joystick.
Example
To set an alarm
1. Use the joystick to scroll to Organizer, and press the
left key to select it.
2. Use the joystick to scroll down to Alarms, and press
the left key to select this function. Press the
left key again to select Alarm.
3. Enter the time and press the left key to save
your entry.
Throughout this user’s guide instructions such as those
above will be given in a shorter form, as follows:
To set an alarm
1. Scroll to Organizer, Alarms, Alarm.
2. Enter the time, Save.
To make and receive calls from standby
• Enter the area code and phone number, press Call.
•Press
End Call to end the call.
• When the phone rings, press Yes to answer the call.
Desktop
Press to go back one
level in the menus.
Press and hold to
return to standby.
Move up,
down, left,
right through
menus.
Press toselect
highlighted
items.
Press to select the
options shown
above these keys
in the display.
T616UG-R2.book Page 7 Monday, August 4, 2003 10:19 AM

8 Getting to know your phone
Key functions
Press once to activate camera
function. Press again to take a
picture.
Volume keys increase/decrease
the earpiece volume during a
call. Scroll through menus, lists
and text. Enter the Status menu
in standby. Press twice to reject
an incoming call. Press once to
mute the ring tone when
receiving a call.
Press to select the options that
appear in the display
immediately above these keys.
Press once to go back one level
in the menus. Press and hold to
return to standby.
Enter *.
Shiftbetween lower/uppercase
when entering text.
Press and hold to enter a pause
in dial strings.
Infrared port.
Press and hold to switch the
phone on or off.
Press to go directly to the
Internet.
4-way navigation and center
select allows you to move
through the menus, lists and
texts. The arrows indicate the
direction to tilt the joystick.
Press down on the joystick to
select an option.
Delete numbers, letters or an
item from a list. Press and
hold to mute the microphone
(during calls) or mute sound.
1-9, 0 Enter digits, 0–9, and letters.
Press and hold to enter
the international prefix +.
Press 7 to enter a pause in
stored numbers. Press 9 to
enter a question mark (?).
Enter # or a space.
m
T616UG-R2.book Page 8 Monday, August 4, 2003 10:19 AM

Getting to know your phone 9
Quick keys
Useful key combinations are described below.
To... When in standby:
Quickly access the main
menu items Tilt the joystick to the right. Then, press the
digit key that
corresponds to the
location of the menu
icon.
Start the camera Press
Go directly to the internet Press to go directly
to mMode.
make an emergency call enter the emergency
number and press Call
enter Call Contact press
enter Call List press Calls ( )
enter Internet Services press
m
voice dial press and hold a volume
key or say your magic
word (when voice dial
is on)
call your voicemail press and hold
enter the +sign press and hold
mute the ring tone when
receiving a call press , or press a volume key once
set the phone to silent press and hold
reach a contact beginning
with a specific letter press and hold any of the keys -
reach a phone number at a
specific position. press the position number and
speed dial press any of the number
keys - and
Call
Take a picture Press to start the
camera. Press again
to take a picture.
To... When in standby:
T616UG-R2.book Page 9 Monday, August 4, 2003 10:19 AM