Sony DC-L10 User manual

DC-L10 World
SERVICE MANUAL
MODEL DEST.
............... .........
BATTERY ADAPTER

DC-L10
!WARNING
This manual is intended for qualified service personnel only.
To reduce the risk of electric shock, fire or injuly, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so. Refer all servicing to
qualified service personnel.

1-1 (E)
DC-L10
SECTION 1
OPERATING INSTRUCTIONS This section is extracted
from operation manual.
A
BC
D
E
1
2
3
Battery Adaptor
DC-L10
Sony Corporation 1998 Printed in Japan
3-864-485-01 (1) English
Batterydetachbutton
Features
• DC-L10 is a battery adaptor for the 6-inch/9-inch color video
monitor that uses the BP-L60/BP-L90 lithium battery pack.
6-inch: PVM 41 Series
9-inch: PVM/BVM 41/44 Series
• The upper adaptor is easy to detach. Simply loosen the bracket
screws. This is handy for removing the battery when it is being
transported.
• If the 6-inch/9-inch monitor is combined with a tuner (TU-
1041U/TU-1040E), you can install the battery adaptor on the
monitor by adding a power cord. Contact your Sony dealer or
local authorized Sony service facility for the additional power
cord.
Parts identification A
1Bracket screws
2Handle
3Battery detach button
4Fuse holder (5A)
5DC power cord (4-pin XLR)
Installing the battery adaptor on the monitor B
11) Remove the monitor screws.
2) Install the brackets on both sides of the monitor. Lock with
the supplied screws (×4).
2Place the battery adaptor on the brackets. Lock the battery
adaptor with the bracket screws (×4). You can tighten the
screws with fingers, a coin or screwdriver.
31) Place the cable clamp on the screw at the upper right rear
of the monitor.
2) Connect the power plug to the monitor’s DC 12V input
connector. Secure the DC power cord with the cable clamp.
Folding the handle C
Push down on both sides of the handle and fold in either
direction. Make sure you fold the handle all the way down. If the
handle is not properly folded, the battery adaptor may not
function properly.
Installing the battery pack D
As shown in the figure, while the handle is folded down, place the
battery pack on the battery adaptor. Slide the battery pack in the
direction of the arrow. Push the battery pack in until it is locked.
To remove the battery pack, push the battery detach button.
Accessories supplied E
16-inch brackets (2)
29-inch brackets (2)
3Screws M4 ×14 (8, including 4 extra)
4Cable clamp (for DC power cord) (1)
5Instruction manual (1)
Specifications
Dimensions 315 ×146 ×100mm (12 1/2×5 3/4×4 inches)
(w/h/d) (The bracket is not included; the handle is
upright.)
Mass Battery adaptor: Approx. 1.4kg (3 lb 14 oz)
6-inch bracket (2): Approx. 800g (1 lb 12 oz)
9-inch bracket (2): Approx. 1,000g (2 lb 3 oz)
Design and specifications are subject to change without notice.
1
2
3
4
5
1
234
1
2)
Powerplug
5
1)
Cableclamp
2)1)
Operating Instructions
Mode d’emploi
Bedienungsanleitung
Manual de instrucciones
Istruzioni per l’uso

2-1 (E)
DC-L10
SECTION 2
SERVICE INFORMATIONS
1Two screws
(+B3 x8)
2Battery bracket
4XLR connector assy
3Hole plug Bushing
White (+)
Black (_)
A
B
White (+)
Black (_)
Connector Two claws
Two claws
C
D
E
<EXTENDING TUNER>
2-1. INSTALLATION
2-1-1. XLR CONNECTOR ASSY INSTALLATION
The use of the DC-L10 in combination with the tuner
requires the parts on the right.
Also, use optional Mounting Bracket (MB-512) if the tuner
is fixed to the monitor.
Rf.No. Part No. Description Remark
7 3-005-073-00 BUSHING x1
8 1-900-239-90 CONNECTOR ASSY, XLR 4P x1
9 1-562-594-11 CONNECTOR (CL-1814T) x2

3-1
DC-L10
SECTION 3
EXPLODED VIEWS
NOTE:
• Items with no part number and no
description are not stocked because they
are seldom required for routine service.
• The construction parts of an assembled
part are indicated with a collation number
in the remark column.
• Items marked " * " are not stocked since
they are seldom required for routine
service. Some delay should be
anticipated when ordering these items.
3-1. CHASSIS
: 7-682-548-04 +B3x8
1
2
3
4
5
6
7
7
8
9
for TUNER
Rf.No. Part No. Description Remark Rf.No. Part No. Description Remark
1 1-557-553-21 CORD (WITH ROUND CONNECTOR) 4P
2 * 1-900-239-21 CONNECTOR ASSY, LUG
3 1-533-191-11 HOLDER, FUSE
4 1-576-232-11 FUSE (H. B. C.) 5A/250V
5 4-066-097-01 KNOB, FASTENER
6 3-650-528-00 SPACER (5 x6)
7 3-005-073-00 BUSHING
8 1-900-239-90 CONNECTOR ASSY, XLR 4P
9 1-562-594-11 CONNECTOR (CL-1814T)
CHASSIS

Sony Corporation
Broadcasting & Professional Systems Company9-976-693-01
English/Japanese
98FY05140-1
Printed in Japan
©1998. 6