Sony TA-MR2ES - 2 Channel Amplifier User manual

Key Features
TA-MR2ES
Distributed Audio Amplifier
•Infrared Communication Port for quick and convenient wireless connectivity
•Advanced Integration Capabilities fit seamlessly into most integrated entertainment solutions
•Infrared Input Port: For use with IR keypads and repeater systems
•Unique IR Code Sets Allow up to 12 units to be operated independently
within 1IR repeater system
•Attractive Silver Metallic Finish
Additional Features
General Features
•2-channel Amplifier For use with
multi-room systems and A/V receivers
•Volume and Mute Control Using IR
Eliminates need for an external volume
control
•12V Trigger Input For activation by
other devices
•12V Trigger Output with Delay Powers
multiple amps without tripping circuit
breakers with 1.5 second delay
•Audio Signal Sensor Automatically activates
power when audio signal is detected
•Discrete Power On and Off For use with
macro-driven controllers
•Back Panel IR Code Generator Enables
simple IR code learning directlyfrom device
•Gain Controls Allows balancing of source
output with amplifier output, easily accessible
by installer behind front knockout panel
•19-inch Rack Mountable For easy
installation, rack-mount hardware supplied
•5Y
ear Parts & Labor Limited Warranty
backed by Sony quality and dependability
•35W x 2: 8 ohms 20Hz-20kHz,THD 0.09%
•40W x 2: 4 ohms 20Hz-20kHz,THD 0.09%

Features
TA-MR2ES
Distributed Audio Amplifier
General
•Silver Finish Distributed Audio
Amplifier
•35W x 2 (8 ohms 20Hz-20kHz,
THD 0.09%)
•40W x 2 (4 ohms 20Hz-20kHz,
THD 0.09%)
•Audio Signal Sensor Activation
•19-inch Rack Mountable
IR Programming
•12 Distinct IR Code Sets
•IR Programming from Back Panel
•Vol +/- and Mute On/Off (Toggle)
Inputs and Outputs
•12V Trigger In x 1
•12V Trigger Out With 1.5 sec
Delay x 1
•IR Input Port with
Pass-Through x 1
•IR Output Port x 1
©2005 Sony Electronics Inc. All rights reserved. Features and specifications are subject to change without notice. Sony is a trademark of Sony. All other trademarks are trademarks of their respective owners.
Sony Electronics Inc.
1Sony Drive
Park Ridge, NJ 07656
For moreinformation:
http://www.sony.com/dn
Specifications
General
•Power Consumption:
100W
•Power Requirements:
120V, 60Hz
•Frequency Response:
5-100Khz, +0.5/-2dB
•Residual Noise: <150_V
or less
•Channel Separation:
60dB/45dB
Audio Input
•Sensitivity: 150mV
•Impedance:
50kilo Ohms
•S/N: 94dB (A-weighted
filter, 150mV input level)
Audio Output
•Voltage: Minimum 2V
without clipped
•Impedance: 1 kilo Ohms
•S/N: 102dB (A-weighted
filter, 2V output)
Supplied
Accessories
•Instruction Manual
•AC Power Cord x 1
•Rack Mount Ear x 2
•Rack Mount Screw x 8
Weights and
Measures
•14 lbs. 5 oz (6.5 kg)
•17” x 2 5/8” x 13 7/8”
(430 x 67 x 350 mm)
UPC Code
•TBD