
Sony Electronics Inc.
1 Sony Drive
Park Ridge, NJ 07656
www.sony.com/professional
V-2439 (MK10564V1)
©2009 Sony Corporation. All rights reserved.
Reproduction in whole or in part without written permission is prohibited.
Features and specifications are subject to change without notice.
All non-metric weights and measurements are approximate.
Sony, HDVS, and Memory Stick are trademarks of Sony Corporation.
Printed in USA (3/09)
Specifications
HDC-3300R HD Super Motion Color Camera
General
Power requirements AC 240 V, 1.4 A max.,DC 12 V, 8.6 A max.
Operating temperature -4 °F to +113 °F (-20 °C to +45 °C)
Storage temperature -4 °F to +140 °F (-20 °C to +60 °C)
Weight 10 lb 9 oz (4.8 kg) (without VF and lens)
Dimensions (W x H x D) 6 1/8 x 7 7/8 x 13 3/4 inches (154 x 197 x 348 mm)
Camera section
Pickup device 3-chip 2/3-inch type CCD
Effective picture elements 1920 (H) x 1080 (V)
Signal format 1920 x 1080 images: 1080/180i (59.94i),1080/150i (50i)
1280 x 720 images: 720/180p (59.94p),720/150p (50p)
Sensitivity F8 (1080/180i)/F9 (1080/150i) at 2000 lx
Signal-to-noise ratio (typical)* x1: -56 dB/-64 dB (at NS MAX mode)
x3: -52 dB/-60 dB (at NS MAX mode)
Horizontal resolution* 1000 TV lines (at center)
Spectral system F1.4 prism
Built-in filters ND: 1: CLEAR, 2: 1/4ND, 3: 1/8ND, 4:1/16ND, 5: 1/64ND
CC: A: CROSS, B: 3200K, C: 4300K, D: 6300K, D: 8000K
Signal inputs
Mic input XLR-3-pin x1 (female)
Audio input CH1: XLR-3-pin x1 (female), MIC or LINE or FRONT MIC selectable
CH2: XLR-3-pin x1 (female),AES/EBU or MIC or LINE selectable
Signal outputs
HD-SDI/SD-SDI output** BNC type x1, HD-SDI or SD-SDI, character on/off selectable
Test output BNC type x1,VBS (SD) or VF:Y/R/G/B (HD) or HD-sync or
SD-sync selectable
Other inputs/outputs
CCU Optical/electrical multi-connector (x1)
Intercom XLR-5-pin x2 (female)
Prompter output BNC type x2
DC input XLR-4-pin x1, DC 10.5 to 17 V
DC output 4-pin x1, DC 10.5 to 17 V (max.1.5 A)
Lens 12 pin x1
Viewfinder 20 pin x1
Earphone Stereo mini-jack x1
Return control 6 pin x1
Remote 8 pin x1
Tracker 10 pin x1
Crane 12 pin x1
Supplied accessories
Operation manual (1),Cable clamper belt (1 set),
Switch label 1, 2 (1 each)
* 1080/180i mode
** When the HDC-3300R camera is not connected to the HDCU-3300R camera control unit,the HD-SDI output signal is for
maintenance purpose only.
Optional Input/Output Boards for HDCU-3300R
HKCU1001 SD Analog Interface Unit
VDA-A board
VBS output BNC type x2, 1.0 Vp-p, 75 Ω
PIX output BNC type x1:VBS/R/G/B selectable,VBS:1.0 Vp-p, 75 Ω
WF output BNC type x1:VBS/R/G/B selectable,VBS: 1.0 Vp-p, 75 Ω
HKCU1003 Multi Interface Unit
VDA-A board
VBS output BNC type x2, 1.0 Vp-p, 75 Ω
PIX output BNC type x1:VBS/R/G/B selectable,VBS:1.0 Vp-p, 75 Ω
WF output BNC type x1:VBS/R/G/B selectable,VBS: 1.0 Vp-p, 75 Ω
VDA-B board
Frame reference input BNC type x1
Frame reference output BNC type x1
PIX output BNC type x1:VBS/R/G/B selectable,VBS:1.0 Vp-p, 75 Ω
WF output BNC type x1:VBS/R/G/B selectable,VBS: 1.0 Vp-p, 75 Ω
HKCU1005 HD/SD Expansion Unit
HD-SDI/SD-SDI output BNC type x4, HD-SDI/SD-SDI selectable
(SDI output 3, 4: character on/off selectable)
HD: SMPTE 292M, 0.8 Vp-p, 75 Ω, 1.485/1.4835 Gb/s,
SD: SMPTE 259M, 0.8 Vp-p, 75 Ω, 270 Mb/s
HKC-T3300 Specifications
General
Power requirements for 13.5 to 17.0 V DC
camera input
Operating temperature -4 ˚F to +113 ˚F (-20 ˚C to +45 ˚C)
Operating humidity 10% to 90% (no condensation)
Weight Cable adaptor: approx. 1 lb 2 oz (.05 kg)
CCD block adaptor: approx. 4 lb 3 oz (1.9 kg) (with CCD block)
CCD block adaptor I/F
Camera cable 55-pin multicore cable connector (male)
MIC IN XLR-3-pin x1 (female)
LENS 12-pin x1
VF 20-pin x1
Intercom XLR-5-pin x1 (female)
Cable adaptor I/F
Camera cable 55-pin multicore cable connector (female)
MIC OUT XLR-3-pin x1 (male)
VF 20-pin x1
INCOM XLR-5-pin x1 (male)
HDCU-3300R HD Super Motion Camera Control Unit
General
Power supply AC 100/120/220 to 240 V, 50/60 Hz
Current consumption max. 5.6 A
Operating temperature +41 °F to +104 °F (+5 °C to +40 °C)
Storage temperature -4 °F to +140 °F (-20 °C to +60 °C)
Weight 37 lb (16.8 kg)
Dimensions (W x H x D) 16 3/4 x 5 1/4 x 16 1/4 inches (424 x 133 x 410 mm)
excluding projection
Signal inputs
HD-SDI return input BNC type x4, SMPTE 292M, 1.485/1.4835 Gb/s
SD-SDI return input BNC type x4, SMPTE 259M, 270 Mb/s
VBS return input BNC type x4
Reference input BNC type x2 (1 connector for loop-through output)
HD: SMPTE 274M, tri-level sync, 0.6 Vp-p, 75 Ω
SD: Black burst, NTSC : 0.286 Vp-p, 75 Ω,
PAL: 0.3 Vp-p, 75 Ω
Prompter input BNC type x4 (2 connectors for loop-through output),
analog NTSC/PAL/HD-Y, 1.0 Vp-p, 75 Ω
AC input (x1),AC 100,110 to 120, 220 to 240 V switchable
Signal outputs
HD-SDI LINK A/B/C BNC type x6, SMPTE 292M, 0.8 Vp-p, 75 Ω, 1.485/1.4835 Gb/s
Super Motion output Link A (x2),Link B (x2), Link C (x2)
HD-SDI output BNC type x4, SMPTE 292M, 1.485/1.4835 Gb/s
SDI output BNC type x4, HD-SDI/SD-SDI selectable
(SDI output 3, 4: character on/off selectable)
HD: SMPTE 292M, 0.8 Vp-p, 75 Ω, 1.485/1.4835 Gb/s
SD: SMPTE 259M, 0.8 Vp-p, 75 Ω, 270 Mb/s
Sync output BNC type x1, HD sync/SD sync selectable
HD: BTA-S001A, tri-level sync, 0.6 Vp-p, 75 Ω
SD: composite sync, 0.3 Vp-p, 75 Ω
Character output BNC type x1,VBS,1.0 Vp-p, 75 Ω
AES/EBU output BNC type x1,AES/EBU format,20-bit/ 48 kHz
Mic output XLR-3-pin x2 (male), 0/-20 dBs selectable
WF mode 4-pin x1
Other inputs/outputs
CAMERA Optical/electrical multi-connector x1, 10.692/10.681 Gb/s
Serial digital x2, 240 V AC power supply
Intercom/Tally/PGM D-sub 25-pin x1
Intercom (PD/ENG): 4W/RTS/CC, 0 dB
Tally: R, G tally, 24 V power in/make contact
PGM: 0/-20 dB selectable
RCP/CNU 8-pin x1, Sony Camera System-700 Control Protocol
(for entire camera system control)
Ethernet RJ-45 x1, 10BASE-T/100BASE-TX
Trunk A 12-pin x1
Trunk line D-sub 9-pin x1 (female),RS-232C
Mic remote D-sub 15-pin x1
Supplied accessories
Operation manual (x1),Number plates (1 set), Fuses (1 set)
SONY55291_HDC.indd 8 4/15/09 7:42:29 AM