– 2 –
TABLE OF CONTENTS
1. GENERAL
Location of Controls (XR-5790R).................................. 3
Location of Controls (XR-5800R).................................. 3
Setting the Clock ............................................................. 4
Using the Rotary Commander ........................................ 4
Installation....................................................................... 5
Connection ...................................................................... 6
Connection Diagram ....................................................... 8
2. DISASSEMBLY ......................................................... 9
3. ASSEMBLY OF MECHANISM DECK........... 11
4. MECHANICAL ADJUSTMENTS....................... 14
5. ELECTRICAL ADJUSTMENTS
Test Mode ........................................................................ 14
Tape Deck Section .......................................................... 14
Tuner Section .................................................................. 15
6. DIAGRAMS
6-1. Printed Wiring Boards – Main Section –....................... 22
6-2. Schematic Diagram – Main Section – ............................ 25
6-3. Printed Wiring Board – Panel Section – (XR-5790R) .. 30
6-4. Schematic Diagram – Panel Section – (XR-5790R) ..... 32
6-5. Printed Wiring Board – Panel Section – (XR-5800R) .. 35
6-6. Schematic Diagram – Panel Section – (XR-5800R) ..... 37
6-7. IC Pin Function Description ........................................... 39
7. EXPLODED VIEWS................................................ 42
8. ELECTRICAL PARTS LIST ............................... 46
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270 ˚C dur-
ing repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
Notes on chip component replacement
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be dam-
aged by heat.
