Sony DR-E10iP/BLK User manual

Quality sound for music and conversation. The stylish, high-quality DR-E10iP
earbuds are an ideal mix of fashionable colors and convenient control for
iPod®1 and iPhone®. The 13.5mm driver units deliver quality sound whether
you’re listening to music or talking on the phone.
In-line remote control and microphone for iPod®1 and iPhone®
Use the in-line remote control and microphone to navigate your iPod® library1 or talk on your
iPhone® without ever taking your player out of your pocket.
Fashionable design, clean sound
The ergonomic design is complemented by 13.5mm driver units to give crystal clear sound.
Colors to suit your iPod® or your mood
The subtle yet stylish color options – black, gray, blue, green, pink, and violet – let you match your
iPod®, your clothes or your mood.
Specications
1. Ability to use all generations of iPod products may vary as not all products are
compatible.
© 2010 Sony Electronics Inc. All rights reserved. Reproduction in whole or in part
without written permission is prohibited. Sony is a trademark of Sony. iPod and iPhone
are trademarks of Apple, Inc. Features and specications are subject to change
without notice. Non-metric weights and measures are approximate and may vary.
/Updated: April 9, 2012
Audio
Driver Unit Open Air, Dynamicbr
13.5 mm, dome type (CCAW)
Frequency Response 18 - 22,000 Hz
Impedance 16 Ohms at 1 kHz
Sensitivity (db) 104 dB/mW
General
Plug Four-conductor gold-plated stereo mini plug for iPod and iPhone with remote function
Power Handling Capacity 100 mW (IEC)
Hardware
Cord 1.2 m (47 1/4 inches) Litz cord, Y-Type
Microphone Yes
Weights and Measurements
Weight (Approx.) Approximately 6 grams (0.21 Ounces) without cord
Accessories
Supplied Accessories
Earpads (2)
Warranty Card (1)
Operating Instructions (1)
DR-E10IP/BLK