Sony SUN 17e10 User manual

This document contains instructions to connect a 17e10/17e11 colo
r monitor to a PC system.
Please read the documentation provided with the video card, for more instructions.
The above picture looks different from the actual monitor.
Installation Manual For
SONY Trinitron
SUN 17e10/SGI 17e11-PC
Color Monitor Series
Please read Entirely Before Installation!
Zeon PDF Driver Trial
www.zeon.com.tw

CABLE CONNECTION :
This monitor is converted to Pc and uses standard VGA DB15 connection.
This monitor can work with any Macintosh system with the appropriate adapters or cables
required.
FRONT PANEL :
This monitor has the following Controls:
Color temp, Convergence, Geometry, Size , Centering, Select , -,+ Brightness, -,+ Contrast
-,+ Brightness is used for adjusting vertical convergence, size and centering when
appropriate SELECT button is pressed first.
-.+ Contrast is used for adjusting horizontal convergence, size or centering if the appropriate
SELECT button is pressed first.
To adjust the screen Size for example, the SELECT button must be pressed first to show the
size LEDselect the desired mode and then using the Adjust -,+ keys you can increase,
decrease the sizes.
The Select Button is for On Screen Color, Focus. you can adjust Individual colors
guns and Monitor Temp.
1The brightness control adjusts the brightness of the display
2The contrast control adjusts the light-to-dark and dark-to-light contrast of the display.
3The monitor degausses automatically at the power up. Degaussing disperses any
accumulated magnetic charge from the face of the monitor. Magnetic disturbances such as
picture distortion or color impurity can be caused by either moving the monitor from one
location to another or swiveling the monitor on its base. It is normal for the tube to shake
during degauss mode.
Power Button:
The front Power button is used to select the monitor to be on or off. Orange light will appear
when monitor is in sleep mode or when no power is connected.
Zeon PDF Driver Trial
www.zeon.com.tw

H.SIZE or Horizontal Size adjustment control:
This is the monitor’s width size adjustment, you need to center the
screen horizontally first before making this adjustment. Sometimes
increasing the Horizontal size to the limits may cause the monitor to
behave abnormal or the screen may become shaky. Normally leave about 1/8 of inch of blank
border on each side of the screen, for the best result. This is needed for the proper monitor
timing adjustment.
H. Center or Horizontal Center Control:
This moves the screen to the right and left.
HEIGHT or Vertical size adjustment control:
This is your vertical height adjustment. You need to center the screen
vertically first to get this correct
V-CENT or Vertical center adjustment control:
This control will move the screen up or down (vertical center).
Zeon PDF Driver Trial
www.zeon.com.tw
Zeon PDF Driver Trial
www.zeon.com.tw

Monitor SPECIFICATION:
Vertical refresh rate : 60-160 Hz
Horizontal Scan rate: 31-81 KHz (Kilo Hetrz).
Horizontal scan rate is automatic for the above range.
Maximum Resolution: 1600x1200
Monitor Adjusted for: 1024x768
This monitor does function with a notebook running at 31.5 Khz( VGA standard).
Monitor selection under windows 9x:
Under Monitor selections, choose Sony Corp G500 Multiscan to give you all high refresh
choices. We recommend running 1024x768 @85 Hz. The higher refresh rate gives you a
better quality picture. The refresh rate is dependable on your video card specifications.
SONY Tube mask lines:
This monitor has 2 very fainted horizontal lines across the screen. This is how SONY
Trinitron Monitors are made to connect the tube masks together and this is not a monitor
defect. For further Information, please contact www.sony.com.
Monitor Labels and handling:
üPlease take extra caution when lifting this monitor. Normally we recommend 2 people to
carry a heavy monitor.
üIn some cases, the serial # and front Logo of this monitor may have been
removed/replaced by the Manufacturer (HP, SUN Micro Systems, ...) so that the original
warranty is not provided from the manufacturer.
üThe 90 day limited warranty is provided by Multimedia Computers.
üThis monitor is carefully tested and refurbished to have the original display specification.
We apologize for any imperfections on the casing (bezel) as these may not be new
monitors.
For Warranty and more info, please refer to: www.multimedianet.com
R
Zeon PDF Driver Trial
www.zeon.com.tw
Zeon PDF Driver Trial
www.zeon.com.tw